Audio & Video

Biamp Vocia DS-4 Vocia Four-Zone Desk Paging Station The Vocia DS-4 is a tabletop desk station for the Vocia networked public address and paging platform. It gives operators a clean, dedicated interface for making live announcements, with four configurable selector buttons for choosing paging zones or zone groups quickly and confidently from a reception desk, security post or control point. The station includes a microphone for clear voice capture and connects to the Vocia network so pages...

Biamp Vocia ELD-1 Vocia End-of-Line Supervision Device The Vocia ELD-1 is an end-of-line supervision device used to monitor the integrity of constant-voltage loudspeaker lines in Vocia paging and voice evacuation systems. Installed at the far end of a speaker circuit, it enables the system to detect line faults such as open or short conditions, so problems can be reported before they compromise critical announcements. Line supervision is a cornerstone of dependable emergency sound and mass...

Biamp Vocia EWS-10 Vocia Emergency Wall Paging Station, 10 Buttons The Vocia EWS-10 is a wall-mounted emergency paging station for the Vocia networked public address and voice evacuation platform. With ten configurable buttons, it lets trained operators quickly select zones and initiate live pages or emergency announcements from a fixed, easily located position such as a security desk, reception area or fire command point. Built for life-safety duty, the emergency wall station supports...

Biamp Vocia EWS-4 Vocia Emergency Wall Paging Station, 4 Buttons The Vocia EWS-4 is a wall-mounted emergency paging station for the Vocia networked public address and voice evacuation platform. Its four configurable buttons let trained operators rapidly select zones and initiate live or emergency announcements from a fixed, clearly identified location, making it well suited to smaller sites or specific response points within a larger facility. Designed for life-safety use, the emergency wall...

Biamp Vocia GPIO-1 Vocia General Purpose Input/Output Device The Vocia GPIO-1 is a general purpose input/output device that extends control and logic connectivity across the Vocia networked public address and paging platform. It provides configurable inputs and outputs that let external contacts, sensors and equipment trigger Vocia actions, and allow the system to drive indicators, relays or signals to other building systems. Typical uses include initiating pages or messages from a contact...

Biamp Vocia IM-16 CK Vocia 16-Input Interface Module Card Kit The Vocia IM-16 CK is an interface module card kit that expands the supervised input capacity of the Vocia Life Safety Interface. Installed as an option card in an LSI-16 or LSI-16e, it adds sixteen additional monitored inputs so more fire alarm, contact and trigger signals can be brought into the Vocia voice evacuation system from a single interface. Consolidating alarm and control triggers this way simplifies integration between a...

Biamp Vocia LSI-16 Vocia 16-Zone Life Safety Interface The Vocia LSI-16 is a life safety interface that connects a fire alarm control panel to the Vocia networked voice evacuation and paging platform. It provides sixteen supervised inputs so alarm and trigger signals from the fire system can automatically initiate the correct emergency messages, tones and zone paging actions across the building. Supervision is central to its role: monitored connections allow faults to be detected and reported,...

Biamp Vocia LSI-16e Vocia Enhanced 16-Zone Life Safety Interface The Vocia LSI-16e is an enhanced life safety interface that connects a fire alarm control panel to the Vocia networked voice evacuation and paging platform. It provides sixteen supervised inputs for alarm and trigger signals and builds on the LSI-16 with expanded capabilities to suit more demanding emergency communication designs. Supervised, monitored connections allow line and input faults to be detected and reported,...

Biamp Vocia MS-1e Vocia Networked Message Processor The Vocia MS-1e is a networked message processor for the Vocia public address, paging and voice evacuation platform. It stores and plays back pre-recorded announcements, alert tones and evacuation messages, distributing them across the network so the right audio reaches the right zones automatically in response to scheduled events, operator actions or emergency triggers. Centralizing message playback in a networked device simplifies...

Biamp Vocia PARM-1 Vocia Page Active Relay Module for VA-8600 The Vocia PARM-1 is a page active relay module for the VA-8600 amplifier mainframe within the Vocia networked public address and paging platform. It provides relay-based output switching that supports amplifier routing schemes, allowing a spare or backup amplifier channel to take over so critical paging and announcement audio can continue if a primary channel is unavailable. Backup amplification is a key requirement in dependable...

Biamp Vocia PARM-1 CK Vocia Page Active Relay Module Card Kit The Vocia PARM-1 CK is the card-kit version of the page active relay module for the VA-8600 amplifier mainframe in the Vocia networked public address and paging platform. Supplied as a field-installable card, it lets integrators add relay-based output switching to a VA-8600 so a spare or backup amplifier channel can take over and keep critical paging and announcement audio flowing during a fault. Backup amplification is fundamental...

Biamp Vocia PLD-1Passive End-of-Line Supervision DeviceThe Vocia PLD-1 is a passive end-of-line device that brings continuous speaker-line supervision to constant-voltage paging and voice-evacuation circuits driven by compatible Vocia amplifiers. Fitted at the far end of a loudspeaker run, it works with a pilot tone produced by the amplifier so the system can verify, in real time, that the cabling and connected loudspeakers remain intact.Because monitoring rides on the existing speaker pair,...

Biamp Vocia PLD-2Vocia Passive End-of-Line Supervision DeviceThe Biamp Vocia PLD-2 is a passive end-of-line device used for loudspeaker line supervision within Vocia paging and voice-evacuation systems. Installed at the far end of a speaker circuit, it works with the system's monitoring to confirm the integrity of the loudspeaker line, an essential capability for life-safety and mass-notification installations.The PLD-2 supports monitoring of speaker circuits so faults such as opens or shorts...

Biamp Vocia POTS-1-2Analog Telephone Paging Interface (2 Lines)The Vocia POTS-1-2 is a telephone paging adapter that lets analog phone lines initiate announcements through a networked Vocia public-address and voice-evacuation system. It bridges standard POTS connections to the Vocia network, allowing staff to page zones or trigger stored messages using a familiar telephone handset.Configured for two analog lines, the POTS-1-2 gives facilities a simple, low-cost paging path without dedicated...

Biamp Vocia POTS-1-4Analog Telephone Paging Interface (4 Lines)The Vocia POTS-1-4 is a telephone paging adapter that connects standard analog phone lines to a networked Vocia public-address and voice-evacuation system. It lets users place announcements or trigger stored messages from an ordinary telephone, bringing paging capability to any location served by the phone system.With capacity for four analog lines, the POTS-1-4 supports busier sites or multiple simultaneous paging origins while...

Biamp Vocia PSKIT-1Standalone Paging Station Interface KitThe Vocia PSKIT-1 is a standalone paging-station kit that lets third-party equipment be wired directly into a Vocia system. It is designed for custom integrations such as fireman microphone stations and purpose-built fire-panel interfaces, providing the electrical connection points needed to originate pages and control announcements from external hardware.The kit offers a balanced microphone input, push-to-talk activation, keypad...

Biamp Vocia TTS-2Text-to-Speech Announcement EngineThe Vocia TTS-2 is a text-to-speech engine that converts incoming text strings into spoken announcements within a Vocia public-address and voice-evacuation system. It allows external systems, such as flight information displays, transit software, or building control platforms, to send text that is voiced automatically across the appropriate paging zones.By generating natural-sounding speech on demand, the TTS-2 removes the need to pre-record...

Biamp Vocia VA-4300CV4-Channel Networked Constant-Voltage AmplifierThe Vocia VA-4300CV is a networked, four-channel amplifier built for constant-voltage paging, background music, and voice-evacuation systems. Each channel delivers 300 watts and can drive 70V or 100V distributed loudspeaker lines, making it a flexible power source for large, zoned installations.As a native Vocia device, the VA-4300CV receives audio and control over the network, so amplification, routing, and monitoring are all...

Biamp Vocia VA-8150CV8-Channel Networked Constant-Voltage AmplifierThe Vocia VA-8150CV is a networked, eight-channel amplifier designed for constant-voltage paging, background music, and voice-evacuation applications. Each channel provides 150 watts and drives 70V or 100V distributed loudspeaker lines, packing high zone density into a single rack-mounted chassis.Operating as a native Vocia device, the VA-8150CV takes audio and control from the network so amplification, routing, and supervision...

Biamp Vocia VA-8600Modular Multi-Channel Networked AmplifierThe Vocia VA-8600 is a modular, digital networked amplifier for large paging and voice-evacuation systems. Its 3RU chassis accepts up to eight AM-600 amplifier cards, each individually configurable from 100 to 600 watts and switchable between 70V, 100V, and low-impedance operation to match virtually any loudspeaker layout.Audio and control travel over the network with dual Ethernet ports for redundancy, and comprehensive DSP provides...

Biamp Vocia VA-8600cModular Multi-Channel Networked AmplifierThe Vocia VA-8600c is a variant of Biamp's modular VA-8600 amplifier platform for large networked paging and voice-evacuation systems. It shares the same 3RU, card-based architecture, accepting multiple plug-in amplifier modules that are individually configured and switchable between 70V, 100V, and low-impedance loudspeaker loads.Audio and control are carried over the network with redundant Ethernet connectivity, and each channel...

Biamp Vocia VAM-1Auxiliary Sensing MicrophoneThe Vocia VAM-1 is an auxiliary microphone used to capture ambient sound for a Vocia public-address and voice-evacuation system. Positioned within a listening space, it provides the system with a reference of background noise levels so paging and announcement volumes can be adjusted to remain clear and intelligible.Working alongside Vocia ambient-noise compensation, the VAM-1 helps ensure that messages stay audible in changing environments such as...

Biamp Vocia VFOM-1 CK Regional ManagerVA-8600 Amplifier Failover ModuleThe Vocia VFOM-1 is a failover module for the VA-8600 amplifier platform, adding automatic backup amplification to critical paging and voice-evacuation channels. When a primary amplifier channel fault is detected, the module transfers its load to a reserved backup channel so audio coverage continues without interruption.By providing seamless amplifier redundancy, the VFOM-1 helps installations meet the strict reliability...

Biamp Vocia VFOM-1-3VA-8600 3:1 Amplifier Failover ModuleThe Vocia VFOM-1-3 is a factory-installed 3:1 failover module for the VA-8600 amplifier, providing one backup amplifier channel to protect a group of three primary channels. If a fault is detected on a protected channel, the module automatically switches its load to the reserved backup so critical announcements keep playing.This 3:1 configuration delivers cost-effective amplifier redundancy for demanding paging and voice-evacuation...