Audio & Video

The PA805Z2-RSMA Passive Directional Antenna both improves reception of transmitter signals and minimizes interference from any 2.4 GHz sources near receivers.A key part of any GLX-D® Advanced Digital Wireless installation, PA805Z2-RSMA works exclusively with GLX-D Advanced.Includes 10' RSMA cable.

AIR® 6.5" Landscape Speakers, Bronze Textured, Pair

ACH or Wire Transfer Payment requiredSystem includesOpen Box Items - new never used or installed just opened boxes and repacked them. 1 - C3500 M#  AH-DLIVE-DLC351 - CDM-132 M# AH-DLIVE-CDM324 - Digital Breakout Box 16X8 M#AH-DX168 Specs and features Measured balanced XLR in to XLR out, 20-20kHz, minimum Gain, Pad outDynamic Range: 110dBSystem Signal to Noise: -92dBFrequency Response: 20Hz - 30kHz +0/-0.8dBTHD+N (analogue in to out): 0.0015% @ +16dBu output, 1kHz 0dB...

The D16Mio is a high performance, high channel density networked audio interface supporting Dante with AES67 interoperability. The D16Mio features 16 channels of studio grade microphone preamplifiers using THATCorporation mic preamp technology, with up to 51 dB of digitally controlled gain in 3 dB steps. Each mic input also supports P48 switchable phantom power and a switchable pad accommodation of pro line level inputs. The balanced line level outputs feature digitally controlled output...

The unDX2IO+ Dante Audio Interface is a cost effective multi-IO wall box. The unDX2IO+ features two balanced mic/line XLR inputs, two balanced XLR line outputs, and a further two balanced line inputs on de-pluggable connectors on the side of the unit. All inputs and outputs can be used simultaneously and all audio channels are available separately. The unDX2IO+ is designed to fit into all dual gang US junction boxes, mud rings, and old work brackets. The unDX2IO+ is PoE enabled, so all...

Dynamic handheld microphone with digital(USB) and analog (XLR) outputs. Windows and Mac compatible.

The Attero Tech by QSC Axiom AXP2O is an audio expansion module that adds two balanced analog line-level outputs to an Axiom host device (such as the ML1 or unBT2A). It is a networked-system accessory/endpoint rather than a standalone processor: it connects to its host over a single Axiom port cable that carries audio, RS-232 control and DC power.Key FeaturesTwo balanced analog outputs on 3.81 mm depluggable terminal blocksConnects to an Axiom host device via one 8P8C Axiom port cableAxiom...

Biamp 16mm GrommetCable Entry Grommet AccessoryThe Biamp 16mm Grommet is a small installation accessory that provides a clean, protected pass-through for cabling. Sized for a 16mm opening, it lines the edge of a cable entry point to guard conductors against chafing on bare panel or enclosure edges during and after installation.Using the correct grommet helps maintain a tidy, professional finish and supports long-term reliability by preventing insulation damage where cables transition between...

Biamp ACC-C-12V-PS12V Power Supply AccessoryThe Biamp ACC-C-12V-PS is a 12-volt power supply accessory used to power compatible control and peripheral devices within Biamp control installations. It provides a regulated, reliable source of DC power where an endpoint cannot be powered over the network and needs a dedicated local supply.Supplied as a matched accessory, it helps integrators deliver clean power for consistent device operation. Using the manufacturer-specified power supply ensures...

Biamp ACC-C-IREInfrared Emitter AccessoryThe Biamp ACC-C-IRE is an infrared emitter accessory used with Biamp control devices to command source equipment such as displays, projectors, and media players. It attaches near the target device's IR receiver, allowing the control system to send discrete commands so users can operate everything from a single, unified interface.IR emitter control is a proven method for integrating equipment that lacks a network or serial control path. By adding the...

Biamp AMP-A460HFour-Channel 60W Analog-Input Power AmplifierThe AMP-A460H is a compact four-channel power amplifier engineered to add clean, reliable output to Biamp Tesira installations and other analog audio sources. Each channel supplies 60 watts, and adjacent channels can be bridged when a room needs more headroom or a move to distributed constant-voltage lines. This flexibility lets a single half-rack unit serve everything from a pair of program speakers to a modest zone of ceiling...

Biamp AMP-D225HTwo-Channel Compact Class D AmplifierThe Biamp AMP-D225H is a compact two-channel amplifier rated at 25 watts per channel into low-impedance loads, making it a tidy solution for powering loudspeakers in conference rooms, huddle spaces, and other small-to-mid installations. Its efficient Class D design runs cool and fanless for quiet operation in occupied spaces.Flexible connectivity, including line-level and USB audio input options, lets the amplifier fit neatly into modern AV...

Biamp Apprimo TEC-X 1000Networked AV Control PadThe Biamp Apprimo TEC-X 1000 is a networked AV control pad that gives users straightforward, tactile control of room systems. Combining a clear interface with a rotary control for smooth adjustments such as volume, it lets participants start meetings, select sources, and manage audio without a learning curve, keeping the focus on the meeting rather than the technology.Designed for reliable, wired network operation, the control pad integrates into...

Biamp Apprimo TEC-X 2000Networked AV Control PadThe Biamp Apprimo TEC-X 2000 is a networked AV control pad that provides intuitive, button-driven control of room technology. It gives users quick access to common functions such as starting sessions, choosing sources, and adjusting audio, delivering a consistent and reliable control experience across meeting spaces.Built for wired network operation, the TEC-X 2000 integrates into Biamp-based room control for centralized configuration and...

Biamp Apprimo TEC-X-TMTEC-X Table Mount AccessoryThe Biamp Apprimo TEC-X-TM is a table-mount accessory designed to position a TEC-X control pad on a conference or meeting-room table. It brings room control within easy reach of participants, presenting the control surface at a comfortable angle for quick, confident operation during meetings.Purpose-built for the TEC-X family, the mount holds the control pad securely and provides a clean route for cabling, preserving a professional, finished...

Biamp Apprimo Touch 1010-inch AV Control Touch PanelThe Biamp Apprimo Touch 10 is a 10-inch touch panel that provides an elegant, intuitive interface for controlling room technology. Its generous display presents clear, customizable controls for starting meetings, selecting sources, adjusting audio, and managing room functions, giving users a confident, modern control experience.Built for networked operation, the panel integrates into Biamp-based room control systems for centralized...

Biamp Apprimo Touch 44-inch AV Control Touch PanelThe Biamp Apprimo Touch 4 is a compact 4-inch touch panel that delivers simple, reliable control of room technology in a small footprint. Its clear interface presents the essential functions users need, from starting a session to adjusting audio and selecting sources, making everyday operation quick and approachable.Designed for networked operation, the panel integrates into Biamp-based room control for centralized management and consistent...

Biamp Apprimo Touch 77-inch AV Control Touch PanelThe Biamp Apprimo Touch 7 is a 7-inch touch panel offering a comfortable, intuitive interface for controlling room technology. Its display provides clear, customizable controls for meeting start, source selection, audio, and room functions, balancing screen real estate with a compact, wall-friendly footprint.Engineered for networked operation, the panel integrates into Biamp-based room control for centralized configuration and consistent...

Biamp Apprimo Touch 8-WMAAngled Wall Mount for Touch 8The Biamp Apprimo Touch 8-WMA is an angled wall-mount bracket for the Apprimo Touch 8 control panel, designed for installation on drywall or a gang box. It positions the panel at an angle for comfortable viewing and touch operation, making it easy for users to interact with the display when standing at the wall.Purpose-built for the Touch 8, the bracket holds the panel securely and supports tidy cable routing for a clean, professional...

Biamp Apprimo Touch 8-WMCSolid-Surface Wall Mount for Touch 8The Biamp Apprimo Touch 8-WMC is a wall-mount bracket for the Apprimo Touch 8 control panel intended for solid surfaces such as concrete and masonry. It provides a secure, direct mounting solution where standard drywall brackets are not suitable, ensuring the panel is firmly and reliably attached.Purpose-built for the Touch 8, the mount holds the panel steadily and supports clean cable routing for a professional appearance. It is...

Biamp Apprimo Touch 8-WMFFlat Wall Mount for Touch 8The Biamp Apprimo Touch 8-WMF is a flat wall-mount bracket for the Apprimo Touch 8 control panel, designed for installation on drywall or a gang box. It holds the panel flush and parallel to the wall for a clean, low-profile look that blends neatly into meeting-room and lobby environments.Purpose-built for the Touch 8, the bracket provides a secure attachment and supports tidy cable routing behind the panel. It is an ideal choice where a...

Biamp Apprimo Touch 8-WMLLow-Profile Wall Mount for Touch 8The Biamp Apprimo Touch 8-WML is a low-profile wall-mount bracket for the Apprimo Touch 8 control panel, designed for drywall and sheetrock installations. Using a recessed approach, it sets the panel close to the wall for an especially clean, integrated appearance that suits design-conscious spaces.Purpose-built for the Touch 8, the mount secures the panel while supporting concealed cabling for a tidy finish. It is an ideal choice for...

Biamp Apprimo Touch 8i8-inch AV Control Touch PanelThe Biamp Apprimo Touch 8i is an 8-inch touch panel that delivers a refined, intuitive interface for controlling room technology. Its clear display presents customizable controls for starting meetings, selecting sources, adjusting audio, and managing room functions, giving users a polished and dependable control experience.Built for networked operation, the panel integrates into Biamp-based room control for centralized configuration and...

Biamp Apprimo TP-TSTouch Panel Table StandThe Biamp Apprimo TP-TS is a table stand for Apprimo touch panels, presenting the control interface on a conference or meeting-room table at an ergonomic angle. It turns a touch panel into a convenient tabletop control point so users can manage room systems from their seat without reaching for a wall.Engineered to hold the panel securely, the stand keeps cabling neatly managed for a clean, professional look. It is well suited to boardrooms, meeting...