Cables

Biamp C5E-10-P10-foot plenum-rated Cat5e cable for Biamp AV systemsThe C5E-10-P is a 10-foot (approximately 3-meter) plenum-rated Category 5e cable supplied by Biamp for use in professional AV installations. Plenum-rated jacketing makes it appropriate for routing through air-handling spaces where fire and smoke performance requirements apply, so it can be run in ceilings and other return-air plenums that many commercial buildings mandate.This length is commonly used to link Biamp devices such...

Biamp C5E-25-P25-foot plenum-rated Cat5e cable for Biamp AV systemsThe C5E-25-P is a 25-foot (approximately 7.5-meter) plenum-rated Category 5e cable supplied by Biamp for professional AV installations. Its plenum-rated jacket meets the fire and smoke requirements for routing through air-handling spaces, making it suitable for longer runs through ceilings and return-air plenums common in commercial construction.The added length suits connections between more widely separated Biamp devices,...

Biamp C5E-3Plenum-Rated Cat5e Network CableThe Biamp C5E-3 is a factory-terminated Category 5e patch cable built for clean, dependable connections between networked AV devices. At a compact three-foot length, it is ideal for short jumps inside a rack, between adjacent enclosures, or from a device to a nearby network port, keeping cable clutter to a minimum during installation.Constructed to plenum-rated standards, this cable is suitable for routing through air-handling spaces where local code...

Crestron DM-CBL-8G-P-SP500DigitalMedia 8G Bulk Cable, Plenum, 500 ft SpoolThe DM-CBL-8G-P-SP500 is a 500-foot spool of Crestron DigitalMedia 8G cable, purpose-built for the backbone of DM 8G and 8G+ signal distribution. Constructed as a 350 MHz-certified twisted-pair cable with an overall foil shield (F/UTP), it exceeds CAT5e standards and rejects EMI and RFI to keep long high-bandwidth runs clean and reliable.This cable is Type CMP plenum-rated for installation in environmental air-handling...

The QSC DPC-1 is a 1-foot DataPort cable, an accessory used to interconnect QSC DataPort power amplifiers with QSC processors, DSP units and Q-SYS I/O frames fitted with DataPort cards. It carries audio, control and monitoring signals between devices over a shielded assembly terminated in QSC's HD-15 (HD15) DataPort connectors. This is a cable accessory, not a standalone electronic unit; the short 1-foot length suits closely stacked rack gear.Key Features1 ft (approx. 0.3 m) DataPort...

The QSC DPC-10 is a 10-foot DataPort cable used to connect QSC DataPort power amplifiers to QSC processors, DSP units and Q-SYS I/O frames fitted with DataPort cards. It transports audio, control and amplifier-monitoring signals over a shielded assembly with QSC HD-15 (HD15) DataPort connectors on each end. As a cable accessory rather than a standalone device, the 10-foot length supports runs between separate racks or across a rack room.Key Features10 ft (approx. 3 m) DataPort interconnect...

The QSC DPC-100 is a 100-foot DataPort cable used to interconnect QSC DataPort power amplifiers with QSC processors, DSP units and Q-SYS I/O frames equipped with DataPort cards. It transports audio, control and amplifier-monitoring signals over a shielded assembly terminated with QSC HD-15 (HD15) DataPort connectors. As the longest common DPC accessory, it supports installations where amplifiers are located a substantial distance from the processing rack. This is a cable accessory, not a...

The QSC DPC-2 is a 2-foot DataPort cable used to connect QSC DataPort power amplifiers to QSC processors, DSP units and Q-SYS I/O frames equipped with DataPort cards. It transports audio, control and amplifier-monitoring signals across a shielded assembly with QSC's HD-15 (HD15) DataPort connectors on each end. This is a cable accessory rather than a standalone device, with the 2-foot length suited to short rack interconnections.Key Features2 ft (approx. 0.6 m) DataPort interconnect cableQSC...

The QSC DPC-20 is a 20-foot DataPort cable used to interconnect QSC DataPort power amplifiers with QSC processors, DSP units and Q-SYS I/O frames equipped with DataPort cards. It carries audio, control and amplifier-monitoring signals over a shielded assembly terminated with QSC HD-15 (HD15) DataPort connectors. This is a cable accessory, not a standalone device; the 20-foot length supports longer runs between equipment racks.Key Features20 ft (approx. 6 m) DataPort interconnect cableQSC HD-15...

The QSC DPC-3 is a 3-foot DataPort cable, an accessory for interconnecting QSC DataPort power amplifiers with QSC processors, DSP units and Q-SYS I/O frames fitted with DataPort cards. It carries audio, control and monitoring signals over a shielded assembly terminated with QSC HD-15 (HD15) DataPort connectors. As a cable accessory it is used to link devices in a rack; the 3-foot length allows a little more routing slack than the shortest DPC cables.Key Features3 ft (approx. 0.9 m) DataPort...

The QSC DPC-4 is a 4-foot DataPort cable used to interconnect QSC DataPort power amplifiers with QSC processors, DSP units and Q-SYS I/O frames equipped with DataPort cards. It carries audio, control and amplifier-monitoring signals over a shielded assembly with QSC HD-15 (HD15) DataPort connectors on both ends. This is a cable accessory, not a standalone unit; the 4-foot length suits interconnections between separated rack positions.Key Features4 ft (approx. 1.2 m) DataPort interconnect...

The QSC DPC-5 is a 5-foot DataPort cable, an accessory for connecting QSC DataPort power amplifiers to QSC processors, DSP units and Q-SYS I/O frames fitted with DataPort cards. It transports audio, control and monitoring signals across a shielded assembly terminated with QSC HD-15 (HD15) DataPort connectors. As an interconnect cable rather than a standalone device, its 5-foot length gives flexible routing between rack units.Key Features5 ft (approx. 1.5 m) DataPort interconnect cableQSC HD-15...

The QSC DPC-6 is a 6-foot DataPort cable used to interconnect QSC DataPort power amplifiers with QSC processors, DSP units and Q-SYS I/O frames equipped with DataPort cards. It carries audio, control and amplifier-monitoring signals over a shielded assembly terminated with QSC HD-15 (HD15) DataPort connectors on both ends. This is a cable accessory rather than a standalone unit; the 6-foot length suits interconnections between racks or spaced rack positions.Key Features6 ft (approx. 1.8 m)...

The QSC DPC-75 is a 75-foot DataPort cable used to connect QSC DataPort power amplifiers to QSC processors, DSP units and Q-SYS I/O frames fitted with DataPort cards. It carries audio, control and amplifier-monitoring signals over a shielded assembly terminated with QSC HD-15 (HD15) DataPort connectors on both ends. This is a long-run cable accessory rather than a standalone device, letting amplifiers sit well away from the processing rack.Key Features75 ft (approx. 22.9 m) DataPort...