Mounts & Racks

The QSC Axon A4FLEX (Attero Tech) is a compact, scalable mic/line connectivity interface for the Q-SYS Ecosystem and other AES67 networked audio systems. It packs analog I/O, a USB audio interface and a small onboard amplifier into a 1/3-rack-width chassis, making it well suited to huddle rooms, classrooms and conferencing spaces.Key FeaturesFour mic/line inputs plus two software-configurable outputs2x2 USB audio interface for soft-codec conferencingBuilt-in 2 x 10 W amplifier for local...

The QSC Axon A8Mio (Attero Tech) is an 8x8 AES67 network audio I/O endpoint compatible with the Q-SYS Ecosystem. It provides eight balanced mic/line inputs and eight outputs in a compact half-rack enclosure, giving integrators an affordable way to add analog connectivity to a networked audio system.Key FeaturesEight mic/line inputs and eight outputsSoftware-controlled preamps with adjustable gainAES67 networking with daisy-chain expansionPoE powered with optional 24 VDC backup inputQ-SYS...

Biamp Seismic cable adapterSeismic Restraint Cable Accessory for Overhead InstallationsThe Seismic cable adapter is an installation accessory that helps secure overhead-mounted Biamp devices with a supplemental seismic restraint. In regions and projects that call for seismic bracing, a safety cable provides an additional means of support so that a ceiling-mounted product remains held in place if the primary mounting is disturbed. The adapter provides the interface needed to attach that...

Biamp TB-1Ceiling Tile Bridge for Plenum-Box InstallationsThe TB-1 is a ceiling tile bridge that spans the ceiling grid to support Biamp plenum boxes during installation. By bridging across the T-bar framework, it distributes the weight of an overhead enclosure onto the grid structure, giving a secure and stable mounting foundation above a suspended ceiling tile. This makes overhead device installs cleaner and more dependable.The bridge is designed to work with TCM and Devio DCM-1 plenum...

Biamp Tesira RMK-1 Single-Unit Rack Mount Kit for Tesira Half-Rack Devices The Tesira RMK-1 is a single-unit rack mount kit that secures one half-rack Tesira expander into a standard 19-inch equipment rack. It provides the brackets and hardware needed to give a compact expander a clean, permanent home in a rack, keeping cabling tidy and the device protected within an equipment cabinet. Intended for the half-rack Tesira expander family, the kit lets integrators standardize on rack-based...

Biamp Tesira RMK-2 Side-by-Side Rack Mount Kit for Tesira Half-Rack Devices The Tesira RMK-2 is a side-by-side rack mount kit that installs two half-rack Tesira expanders together in a single rack space. It supplies the brackets and hardware to join two compact devices across the width of a standard 19-inch rack, making efficient use of vertical space in busy equipment cabinets. By pairing two half-rack expanders in one rack unit, the kit helps integrators keep dense Tesira installations...

Biamp Tesira UTMK-1Under-table mounting kit for TesiraFORTE processorsThe Tesira UTMK-1 is a mounting accessory that secures a TesiraFORTE fixed I/O digital signal processor beneath a table, desk, or credenza. For rooms where rack space is unavailable or where the processor should stay close to the connected microphones, cameras, and sources, this bracket provides a tidy, out-of-sight installation that keeps the hardware protected and cabling organized.The kit holds the processor firmly in...

The QSC TMR-1 is a rack-mount kit for the QSC TouchMix-8 and TouchMix-16 compact digital mixers. It is an installation accessory, not a mixer itself. The kit provides the brackets and hardware needed to secure a TouchMix-8 or TouchMix-16 into a standard 19-inch equipment rack, protecting the mixer during transport and keeping it neatly integrated with other rack gear for touring, install and studio use. Mounting the mixer in a rack also helps secure connections and present the touchscreen at a...

The QSC TMR-2 is a rack-mount kit for the QSC TouchMix-30 Pro compact digital mixer. It is an installation accessory rather than a mixer. The kit supplies the brackets and hardware required to mount a TouchMix-30 Pro into a standard 19-inch equipment rack, keeping the mixer secure and integrated alongside amplifiers, processors and other rack gear. Racking the TouchMix-30 Pro protects it in transit, tidies cabling and presents the touchscreen at a practical working angle for engineers in...