The Chief Tempo AS3LD is a configurable wall mount system that combines the display mount, component storage and cable management into one part number and one box. Two 15 x 10 inch Lever Lock storage plates (with room to add more) hold between two and six small devices such as codecs, PCs or extenders directly behind the screen, and the plates slide along the mounting rail so equipment lands where you need it. Integrators can pre-load devices and cabling before the mount ships to site, cutting on-site labor. The mount extends 10.65 inches for service access and tilts down 10 degrees in 2.5-degree increments, while an extending interface and lateral shift help center the display after installation. Up to 1 inch of post-install leveling corrects for imperfect walls. At a 1.96-inch minimum depth, total projection stays ADA compliant when the display itself is under 2 inches deep. The open wall plate leaves room to position power and data boxes, and the system fits 16- or 24-inch stud spacing.
Key Features
- Two 15" x 10" Lever Lock storage plates included
- 1 RU (1.75" / 44 mm) storage clearance behind display at 0° tilt
- Service depth 12.6" (320 mm); service extension 10.65" (271 mm)
- Tilt -10° / +0° in 2.5° increments
- Six cable management clips and a home-latch lockout clip included
- Open wall plate for power/data boxes and in-wall storage
Ideal Applications
Corporate conference and huddle rooms, classrooms, healthcare and digital signage installs where the display, codec or PC, and cabling should be staged together and serviced from the front.
Compatibility
Universal landscape mounting for typical 49"-86" displays up to 200 lbs with VESA patterns up to 970 x 450 mm; wood stud spacing 16" or 24" O.C. Works with Chief Tempo accessories such as the AS3A100 camera shelf, AS3A101 video/sound bar mount and AS3A102 Crestron UC bracket accessory (sold separately). No PDU included; see AS3LDP7 for the PDU bundle.