Mounts & Racks

OverviewThe SANUS CCSTVK conceals the cable drop between a wall-mounted TV and the components or outlets below it, giving a cleaner finished install without opening the wall.Key FeaturesWide 3.5" channel holds up to five cablesCover snaps on and offPaintable to match wall colorScrew-mount hardware includedDurable PVC constructionIdeal ApplicationsWall-mounted TVs in living rooms, bedrooms, offices and rental properties where in-wall cable routing is not an option.CompatibilityLow-voltage AV...

OverviewThe SANUS CFA16SM converts a wall-mounted CFR1615 or CFR1620 open-frame rack into a swing-out installation. The rack pivots away from the wall so installers and owners can reach the back of components for wiring changes and service, then locks back against the wall when work is done.Key FeaturesSwings a wall-mounted open-frame rack away from the wall for rear access to components and wiringLocking pins hold the rack firmly against the wall in its home positionCable pass-through lets...

OverviewThe SANUS CFR1610 is a compact 10U open-frame rack for organizing AV and network gear. It can hang on the wall or stand on the floor, and it is designed to stack with other SANUS open-frame racks as a system grows.Key FeaturesOpen frame and vented shelves help equipment shed heatSelf-aligning assembly for a quick setupWall hardware included for wood studs or concreteKeyhole mounting lets one installer pre-drill and hang the rackTwo vented 1U shelves and two 1U blanking panels in the...

OverviewThe SANUS CFR1615 is a 15U open-frame rack for organizing AV components and network hardware. It can be installed directly on the wall or used floor-standing, and its stackable frame lets installers combine sections to reach the height a project requires.Key FeaturesFloor capacity of 600 lbs; wall-mount capacity of 200 lbsStackable sections combine into 15U, 20U, 30U, 35U or 40U heightsOpen-frame construction for access and airflow around equipment1U shelf and 2U shelf...

OverviewThe SANUS CFR2127-B1 is a 27U enclosed equipment rack built from heavy-gauge steel and delivered pre-assembled. It brings receivers, amplifiers, streamers, network gear and control processors together in a single lockable cabinet, with a passive airflow design and enough shelving included to start loading equipment right away.Key Features27U enclosed component rack ships pre-assembled750 lb weight capacity with heavy-gauge steel constructionLockable tempered glass front door plus...

OverviewThe SANUS CFR2136 is a full-height 36U rack from the Component Series, built from heavy-gauge steel and delivered pre-assembled. It comes with two 1U and six 2U vented shelves with back stops, matching blanking panels, and quick-release panels that open the rack for wiring and service. Top and bottom vents plus 3U cut-outs support passive airflow or the addition of active cooling.Key Features36U Component Series rack with 850 lb weight capacityShips pre-assembled with vented shelves...

OverviewThe SANUS CFR2144 is a floor-standing 44U component rack built for large AV systems. It arrives assembled, carries up to 1,000 lbs of equipment, and uses removable panels so installers can get to wiring from the sides and back.Key FeaturesTempered glass front door with lockQuick-release side and rear panels for service accessTop and bottom venting, plus a removable 3U panel for fan optionsCasters and adjustable feetTwo 1U and seven 2U shelves with matching blanking panelsGanging...

OverviewThe SANUS LC1A suspends a flat-panel TV from the ceiling where wall mounting is impractical. Its Virtual Axis tilt moves with light hand pressure, and the head swivels to aim the screen toward the seating area.Key FeaturesVirtual Axis tilt for easy up/down adjustment55° swivel in either direction±6° roll adjustment after hanging for levelingWood joist and solid-surface ceiling adapters includedTwo pipe lengths included to set drop heightConcealed cable channelIdeal ApplicationsBars,...

OverviewThe SANUS LL11-B1 is a fixed-position, super-slim TV wall mount from the HDPro line. It positions flat-panel displays roughly 0.55 in. from the wall for a near-flush finish while still allowing post-install leveling, side-to-side shifting and easy access to the TV's inputs.Key FeaturesUltra-slim profile holds the TV about 0.55 in. from the wallClickStand holds the bottom of the TV away from the wall for cable access without removing the TVHidden quick-release tabs on both brackets...

OverviewThe SANUS SA-IWB17 is a 17-inch media box that installs inside the wall cavity behind a mounted TV, giving small source devices and their cabling a dedicated, concealed home. It is finished in white with a trim ring and a split cover for a clean, flush appearance.Key FeaturesRecessed design keeps devices and cables out of sight behind the displayMaterial does not block Wi-Fi, so wireless streamers stay connectedElevated secondary mounting plate (1.5") adds a second storage...

OverviewThe SANUS SA-IWB9-W1 is a recessed media enclosure that installs in drywall behind a wall-mounted television. It gives streaming sticks, set-top boxes, control modules and compact network switches a dedicated home inside the wall, so nothing hangs off the back of the TV or sits on the floor.Key FeaturesRecessed in-wall enclosure installs directly behind a wall-mounted TV to hide streaming players, modules and small network gearWi-Fi-transparent construction so wireless devices inside...

OverviewThe SANUS SASB1 mounts a soundbar to the TV itself rather than the wall, keeping the speaker aligned with the screen and allowing it to move with a full-motion mount. It attaches to either the back or bottom of the soundbar, and its depth adjustment lets installers set the bar flush with the TV face or move it forward to clear upward-firing (Atmos-style) drivers.Key FeaturesAttaches a soundbar directly to a wall-mounted TV so both move togetherMounts to the back or bottom of most...

OverviewThe SANUS SASP1 gives a streaming stick, box or similar small accessory a dedicated home behind a mounted TV. Instead of leaving a device dangling from an HDMI port or sitting on a shelf, it is strapped to the panel and hidden from view.Key Features8.39" x 6.13" panel with a 3 lb capacityWorks with or without a wall mountStraps secure the device to the panelAll installation hardware includedIdeal ApplicationsWall-mounted TVs in homes, guest rooms, hotels, conference rooms and digital...

OverviewThe SANUS VDLF28 is a full-motion mount that moves smoothly regardless of TV weight or thickness, then stays put once positioned. It folds back to a slim 2.15" profile when the TV is pushed in.Key FeaturesFluidMotion extension, tilt and swivelSteady Set keeps the TV from driftingPost-install levelingIntegrated cable managementSolid steel constructionAll hardware included; about 30-minute installIdeal ApplicationsLiving rooms, open floor plans, corner-adjacent walls and conference...

OverviewThe SANUS VDLT17 is a large-format tilting wall mount that adds side-to-side angle adjustment to a conventional tilt mount. It holds the TV close to the wall for a clean look, then pulls forward to 6.8 inches when you need to reach inputs or angle the screen away from window glare.Key FeaturesFour-direction tilt for vertical and horizontal angle controlScissor extension to 6.8" for easier cable hookupProSet adjustment to fine-tune level after the TV is hungFluid Motion positioning that...

OverviewThe SANUS VDMF20-B1 is a single-stud full-motion mount for small and mid-size TVs. It extends, swivels and tilts smoothly, holds its position once set, and folds back to a slim 2.04 in. profile. SANUS has discontinued this model; availability is limited to remaining stock.Key FeaturesFull-motion arm extends to 20 in. from the wall and folds to 2.04 in.Up to 60 degrees of swivel each way and +5/-15 degrees of tiltFluidMotion movement with SteadySet positioning to prevent...

OverviewThe SANUS VLF628 is a premium full-motion mount that pulls large TVs out from the wall and angles them toward any seat. It collapses to 3.25" from the wall when not in use.Key Features28" maximum extensionTilt, swivel and roll adjustmentTool-free position changesTV hooks click into place for a secure connectionWorks for corner mountingHardware included; safety tested and UL certifiedIdeal ApplicationsLiving rooms, family rooms, open-concept spaces, corner installs and conference rooms...

OverviewThe SANUS VLF828 is an Advanced Full-Motion 4D mount that adds Shift height adjustment, letting installers raise or lower the TV after it is hung to clear outlets, soundbars or decor. It extends to 28 in, tilts +5/-15 degrees, swivels up to 46 degrees each way and retracts to 2.42 in from the wall. A lower handle assists with moving large screens and tucks away when not needed, while FollowThru cable management keeps cords inside the arm.Key FeaturesFits 42"-90" TVs up to 125 lbs with...

OverviewThe SANUS VLL5-B1 is a Premium Series fixed-position TV wall mount built for large flat panels. Its low 0.91 in. profile keeps the display close to the wall, while expandable brackets, tool-free assembly and leveling after hanging help installers get a clean, square result.Key FeaturesLow-profile fixed design sits 0.91 in. from the wallExpandable TV brackets fit a wide range of screen sizesPost-installation leveling adjustmentSide-to-side sliding to center the TV on the wallPull-down...

OverviewThe SANUS VMPL50A is a low-profile tilting mount that holds the TV 1.81 in from the wall while allowing +9/-10 degrees of tilt to cut glare. The Virtual Axis system lets the TV be angled with a light touch and no tools, and ProSet adjustment fine-tunes level after the screen is hung. A lateral shift feature helps center the TV when studs are off-center, and a locking system secures the TV to the wall plate.Key FeaturesFits 32"-85" TVs up to 150 lbsLow 1.81 in profile with tool-free...

OverviewThe SANUS VMPR1 is a universal ceiling mount for front projectors. Independent adjustments make it straightforward to square the image to the screen, and the quick-release mechanism lets the projector come down for bulb or filter changes and go back up without re-aiming.Key FeaturesIndependent roll, tilt and swivel adjustmentsQuick-release for maintenance without realignment7" extension pipe includedDecorative cover conceals mounting hardwareCable management to tidy power and signal...

OverviewThe SANUS VSF817 is a compact articulating mount for small TVs and monitors. A single arm extends to 17 inches for corner placement or wide viewing angles, and the Shift feature lets you raise or lower the screen after it is installed to clear a soundbar, mantel or outlet.Key FeaturesUp to 4" vertical shift after installationFluidMotion for smooth extend, tilt and swivelVirtual Axis tilt to cut glareProSet height and level micro-adjustmentSteady Set to prevent driftIntegrated arm cable...

OverviewThe SANUS VXL7 is built for very large displays that need a flush, fixed installation. The adjustable wall plate expands to reach a third stud, and the TV can slide side to side after hanging to center it on the wall.Key FeaturesExtra-large capacity: up to 140" and 300 lbsSuper-slim 1.96" depthExpandable 33"-52" wall plateOpen plate design clears in-wall boxes and outletsLateral shift and post-leveling adjustmentAudible safety tab with padlock provision; optional arm extensions...

OverviewThe SANUS VXT7-B2 is a tilting wall mount engineered for the largest consumer and commercial flat panels. An expandable wall plate spans more studs for very wide screens, Virtual Axis tilt lets the display be angled by hand, and ProSet Plus adjustment allows fine height and level corrections after the TV is hung.Key FeaturesTilting design with 7 degrees up and 10 degrees down of fingertip Virtual Axis tiltHolds TVs up to 300 lbs on a solid steel frameExpandable wall plate extends from...