Mounts & Racks

The On-Q ENP4250NA (42-inch Plastic Enclosure with Trim Ring and Hinged Door) is part of the Legrand On-Q structured wiring line for residential and light-commercial installs.Category: Enclosures / Plastic Enclosures.

The On-Q ENP42605NA (42-inch Plastic Trim Ring and Hinged Door, 5-Pack) is part of the Legrand On-Q structured wiring line for residential and light-commercial installs.Category: Enclosures / Plastic Enclosures.

The On-Q ENP4260NA (42-inch Plastic Trim Ring and Hinged Door) is part of the Legrand On-Q structured wiring line for residential and light-commercial installs.Category: Enclosures / Plastic Enclosures.

The On-Q ENP42805NA (42-inch Plastic Enclosure, No Cover, 5-Pack) is part of the Legrand On-Q structured wiring line for residential and light-commercial installs.Category: Enclosures / Plastic Enclosures.

The On-Q ENP4280NA (42-inch Plastic Enclosure, No Cover) is part of the Legrand On-Q structured wiring line for residential and light-commercial installs.Category: Enclosures / Plastic Enclosures.

The On-Q TM0106 (1x6 Telephone Board with RJ31X for MDU enclosure) is part of the Legrand On-Q structured wiring line for residential and light-commercial installs.Category: Enclosures / MDU Enclosures.

The On-Q VM0106 (6-Way 1GHz Vertical Coax Splitter) is part of the Legrand On-Q structured wiring line for residential and light-commercial installs.Category: Enclosures / MDU Enclosures.

The On-Q VM0206 (6-Way 2GHz Vertical Coax Splitter) is part of the Legrand On-Q structured wiring line for residential and light-commercial installs.Category: Enclosures / MDU Enclosures.

The On-Q VM0208 (8-Way 2GHz Vertical Coax Splitter) is part of the Legrand On-Q structured wiring line for residential and light-commercial installs.Category: Enclosures / MDU Enclosures.

The QSC TMR-1 is a rack-mount kit for the QSC TouchMix-8 and TouchMix-16 compact digital mixers. It is an installation accessory, not a mixer itself. The kit provides the brackets and hardware needed to secure a TouchMix-8 or TouchMix-16 into a standard 19-inch equipment rack, protecting the mixer during transport and keeping it neatly integrated with other rack gear for touring, install and studio use. Mounting the mixer in a rack also helps secure connections and present the touchscreen at a...

The QSC TMR-2 is a rack-mount kit for the QSC TouchMix-30 Pro compact digital mixer. It is an installation accessory rather than a mixer. The kit supplies the brackets and hardware required to mount a TouchMix-30 Pro into a standard 19-inch equipment rack, keeping the mixer secure and integrated alongside amplifiers, processors and other rack gear. Racking the TouchMix-30 Pro protects it in transit, tidies cabling and presents the touchscreen at a practical working angle for engineers in...

The Russound S1-18-R is a single-gang electrical junction box with nail-on mounting, a handy item to keep in the installer's van stock. It gives a single-gang keypad, volume control, wallplate or speaker-connection plate a proper enclosure to mount into, and it is designed for nailing directly to a stud before drywall goes up, the usual approach in new construction. Choosing a box sized for the device keeps wiring tidy and leaves room for low-voltage speaker cable and control wiring behind the...

The Russound S1-18-W is a single-gang junction box sold as a simple installation accessory for wall-mounted components. It gives installers a one-gang box to mount a single-gang device, such as a wall control or keypad, in the wall. This version is supplied with clamps, the usual arrangement for old-work or retrofit jobs, where the box is pushed into a cut-out in finished drywall and the clamps tighten against the back of the wall. Keeping a supply of matching boxes on the truck saves a trip...

The Russound S1-22-R is a single-gang junction box sold as a simple installation accessory for wall-mounted components. It gives installers a one-gang box to mount a single-gang device, such as a wall control or keypad, in the wall. This version is supplied with nails, the usual arrangement for new-construction work, where the box is fastened directly to an exposed stud before drywall goes up. Keeping a supply of matching boxes on the truck saves a trip to the supply house when a multiroom...

The Russound S2-32-W is a double-gang electrical junction box with clamp mounting, a handy item to keep in the installer's van stock. It gives a double-gang keypad, volume control, wallplate or speaker-connection plate a proper enclosure to mount into, and it is designed for mounting with clamps rather than nailing to framing, the approach typically used for retrofit or existing-wall work. Choosing a box sized for the device keeps wiring tidy and leaves room for low-voltage speaker cable and...

The Russound S2-35-RAC is a double-gang electrical junction box with nail-on mounting, a handy item to keep in the installer's van stock. It gives a double-gang keypad, volume control, wallplate or speaker-connection plate a proper enclosure to mount into, and it is designed for nailing directly to a stud before drywall goes up, the usual approach in new construction. Choosing a box sized for the device keeps wiring tidy and leaves room for low-voltage speaker cable and control wiring behind...

The Russound S3-54-RAC is a triple-gang electrical junction box with nail-on mounting, a handy item to keep in the installer's van stock. It gives a triple-gang keypad, volume control, wallplate or speaker-connection plate a proper enclosure to mount into, and it is designed for nailing directly to a stud before drywall goes up, the usual approach in new construction. Choosing a box sized for the device keeps wiring tidy and leaves room for low-voltage speaker cable and control wiring behind...

The Russound SB-C67 is a pre-construction mounting bracket that lets installers set the location of a 6.5" in-ceiling speaker while the framing is still open. It attaches to the joists during rough-in, so the speaker position is fixed before drywall goes up and every room ends up with consistent, properly spaced speaker placement.Its perforated, tabbed wings can be nailed, screwed or stapled to the framing, and holes molded into the bracket let the installer tie off the speaker wire so it is...

The Russound SB-C80 is a pre-construction mounting bracket that lets installers set the location of a 8" in-ceiling speaker while the framing is still open. It attaches to the joists during rough-in, so the speaker position is fixed before drywall goes up and every room ends up with consistent, properly spaced speaker placement.Its perforated, tabbed wings can be nailed, screwed or stapled to the framing, and holes molded into the bracket let the installer tie off the speaker wire so it is not...

OverviewThe SANUS CCS2KWH is a peel-and-stick raceway kit for routing low-voltage wiring neatly across walls. Fittings let the run turn corners and branch, and the hinged channel opens for future cable changes.Key FeaturesTen pieces: three 48" channels plus seven fittingsAdhesive backing for tool-free mounting on smooth surfacesHinged-lid channel for easy accessField-cuttable to any lengthPaintable white PVCIdeal ApplicationsConcealing speaker wire, HDMI and video cables, TV wiring and...

OverviewThe SANUS CCS3KWH kit covers exposed cords along walls and baseboards. Peel-and-press channels with hinged lids and a full set of fittings let you route cables around corners and branch runs.Key FeaturesAdhesive-backed channels for drill-free installation on clean, smooth surfacesHinged lid for later cable changesElbows, T-fitting, couplings and exit fittings includedField-cuttable lengthsPaintable white PVC finishIdeal ApplicationsConcealing speaker wire, HDMI and TV/video cabling,...

OverviewThe SANUS CCSHEK is a surface raceway kit for hiding exposed AV and power cabling. It combines corner-style CornerMate channel with flat CordMate II channel and connecting fittings, so a run can travel along a baseboard, turn a corner and reach equipment without visible wires.Key FeaturesCovers speaker, video and power cords along walls and in corners for a cleaner installCornerMate channel reverses for a concave or convex corner profilePre-applied adhesive backing for peel-and-press...

OverviewThe SANUS CCSIWLVK is a simple do-it-yourself kit for concealing low-voltage cables behind a wall-mounted TV. It includes the grommets and a hole saw with a 1/4 in bit, so installation requires only a drill and a Phillips screwdriver. The white PVC plates can stay as supplied or be painted with latex paint to match the wall.Key FeaturesFive-piece DIY kit for routing low-voltage cables such as HDMI inside the wallTwo 3.75 x 3.75 in PVC wall plates/grommetsHole saw with 1/4 in pilot bit...

OverviewThe SANUS CCSIWPK is a recessed power and cable kit for a clean wall-mounted TV installation. One grommet goes behind the TV and one near the floor, connected by an in-wall rated harness so the TV's power cord and AV cables can run inside the wall instead of hanging below the screen.Key FeaturesTwo power grommets joined by a 54" harness6 ft in-wall rated power cordHole saw with 1/4" pilot bit for cutting openingsWhite plates that can be painted to match the wallDesigned for typical...