The Russound SB-C67 is a pre-construction mounting bracket that lets installers set the location of a 6.5" in-ceiling speaker while the framing is still open. It attaches to the joists during rough-in, so the speaker position is fixed before drywall goes up and every room ends up with consistent, properly spaced speaker placement.
Its perforated, tabbed wings can be nailed, screwed or stapled to the framing, and holes molded into the bracket let the installer tie off the speaker wire so it is not lost during construction. Once the drywall is hung, the bracket acts as a guide for cutting the 8.25" opening; Russound advises keeping the cut within 1/4 inch of the inside of the bracket. The speaker frame then drops through and clamps into place. The internal opening of 8.375" provides about 1/8 inch of extra clearance over the cutout, which helps the speaker slip in without binding.
Made from tough plastic and aluminum, the bracket is an accessory only; the speaker, grille and wire are sold separately. Using rough-in brackets also reduces the chance of a mis-cut ceiling and makes trim-out faster on multi-room projects.
Key Features
- Fits 6.5" speakers needing a 8.25" cutout
- Mounts to framing before drywall
- Doubles as a drywall cut guide
- Molded speaker-wire tie-off holes
- 8.375" opening for 1/8-inch clearance
- Plastic and aluminum construction
Ideal Applications
New-construction homes, remodels with open ceilings, multi-room audio pre-wire, and commercial fit-outs with drywall ceilings.
Compatibility
Designed for Russound 6.5" IC-Series in-ceiling speakers (IC-610, IC-610T, IC-620, IC-620T and IC-630), and usable with other brands' 6.5" speakers that specify a 8.25" cutout. Verify the speaker's cutout before ordering.