Mounts & Racks

The Chief AVA1103 is an additional component storage panel for the Tempo AVSFSS flat panel floor support system. The AVSFSS ships with one storage panel; this accessory expands capacity so more of the room's small electronics can be mounted out of sight behind the display. Its active mounting area measures 13.4 x 10.7 inches (about 143 square inches), giving room for devices such as media players, HDMI/HDBaseT extenders, small form factor PCs or wireless presentation receivers, along with...

The Chief AVA1104 is the extra-large version of the Tempo dual-display accessory, letting a Tempo AVSFSS floor support system carry two big displays side by side in a 2x1 arrangement. Chief rates it for displays up to 80 inches each. The assembly spans 108.33 inches wide and stays slim at 1.7 to 2.2 inches deep, and it offers height adjustment, lateral shift and micro-adjustment so the two screens can be aligned into a tight, even seam. Because the floor support carries the weight to the...

The Chief AVA1105 is a cover extension for the Tempo AVSFSS flat panel floor support system. When a display is mounted near the top of the AVSFSS height range, a gap can open between the stock mid cover and the display; this accessory stacks on top of the existing mid cover to add 7 inches of extra vertical coverage, keeping cabling and stored components hidden for a finished look. It attaches to the AVSFSS uprights using the magnetic tape supplied with it, so installation is quick and...

The Chief Tempo AVSFSS is a flat panel floor support system that lets a display sit against the wall while its weight is carried by the floor. That eliminates wall inspection and reinforcement, making it a strong fit for leased spaces, glass or demountable walls, and drywall without blocking. Two uprights stand 16 to 24 inches apart center-to-center, can slide along the wall to clear outlets or obstructions, and carry printed height markings for fast, repeatable display placement. Cables run...

The Chief CMA100 combines an 8-inch ceiling plate and a telescoping 1.5-inch NPT extension column in one part, so a single SKU covers both the structural attachment and the drop to the projector or display mount. The column adjusts from roughly 24.25 to 46 inches, letting the installer set the final height on site instead of cutting pipe to length, which is especially handy where ceiling heights vary between rooms. Once the drop is set, four included set screws lock the telescoping sections...

The Chief CMA100W combines an 8-inch ceiling plate and a telescoping 1.5-inch NPT extension column in one part, so a single SKU covers both the structural attachment and the drop to the projector or display mount. The column adjusts from roughly 24.25 to 46 inches, letting the installer set the final height on site instead of cutting pipe to length, which is especially handy where ceiling heights vary between rooms. Once the drop is set, four included set screws lock the telescoping sections...

The Chief CMA101 is a 5-inch (127 mm) designer ceiling plate, the piece that ties a Chief ceiling-mount assembly to the building structure. It fastens to the structural ceiling above and provides the threaded connection point for a Chief extension column, which in turn carries a projector mount, display mount or other ceiling-hung AV device. The plate measures 5 x 5 inches with a 0.7-inch profile and is rated by Chief for 500 lbs (226.8 kg). Its designer styling gives a more finished...

The Chief CMA101W is a 5-inch (127 mm) designer ceiling plate, the piece that ties a Chief ceiling-mount assembly to the building structure. It fastens to the structural ceiling above and provides the threaded connection point for a Chief extension column, which in turn carries a projector mount, display mount or other ceiling-hung AV device. The plate measures 5 x 5 inches with a 0.7-inch profile and is rated by Chief for 500 lbs (226.8 kg). Its designer styling gives a more finished...

The Chief CMA105 is a 4-inch (102 mm) flat ceiling plate, the piece that ties a Chief ceiling-mount assembly to the building structure. It fastens to the structural ceiling above and provides the threaded connection point for a Chief extension column, which in turn carries a projector mount, display mount or other ceiling-hung AV device. The plate measures 4 x 4 inches with a 0.7-inch profile and is rated by Chief for 500 lbs (226.8 kg). It carries OSHPD, UL Listed certifications, and its...

The Chief CMA106 is a junction box assembly ceiling plate designed to suspend a projector between ceiling joists rather than directly beneath one. It works at any ceiling height: simply combine it with whatever length of 1.5-inch NPT pipe gives the drop you need, then attach a Chief projector mount below. The plate measures 5 x 5 inches with a 0.7-inch profile and uses a 102 x 102 mm mounting pattern. Chief rates it for 50 lbs, so it is intended for lighter projectors and devices; heavier...

The Chief CMA107W is an adaptor for suspending a Sony MAS-A100 beamforming ceiling microphone using Chief's ceiling plate and pipe hardware. Beamforming mics perform best when hung at a specific distance above the talkers, and this adaptor lets you reach that optimal position in rooms of almost any ceiling height: attach it to any Chief ceiling plate, choose a length of Chief 1.5-inch NPT pipe for the drop, and mount the microphone to the adaptor. The plate measures 5 x 5 inches with a...

The Chief CMA110 is a 8-inch (203 mm) flat ceiling plate, the piece that ties a Chief ceiling-mount assembly to the building structure. It fastens to the structural ceiling above and provides the threaded connection point for a Chief extension column, which in turn carries a projector mount, display mount or other ceiling-hung AV device. The plate measures 8 x 8 inches with a 0.7-inch profile and is rated by Chief for 500 lbs (226.8 kg). It carries OSHPD, UL Listed certifications, and its...

The Chief CMA110-G is a 8-inch (203 mm) flat ceiling plate, the piece that ties a Chief ceiling-mount assembly to the building structure. It fastens to the structural ceiling above and provides the threaded connection point for a Chief extension column, which in turn carries a projector mount, display mount or other ceiling-hung AV device. The plate measures 8 x 8 inches with a 0.7-inch profile and is rated by Chief for 500 lbs (226.8 kg). It carries OSHPD, TAA, UL Listed certifications, and...

The Chief CMA110W is a 8-inch (203 mm) flat ceiling plate, the piece that ties a Chief ceiling-mount assembly to the building structure. It fastens to the structural ceiling above and provides the threaded connection point for a Chief extension column, which in turn carries a projector mount, display mount or other ceiling-hung AV device. The plate measures 8 x 8 inches with a 0.7-inch profile and is rated by Chief for 500 lbs (226.8 kg). It carries OSHPD, UL Listed certifications, and its...

The Chief CMA115 is a 6-inch (152 mm) flat ceiling plate, the piece that ties a Chief ceiling-mount assembly to the building structure. It fastens to the structural ceiling above and provides the threaded connection point for a Chief extension column, which in turn carries a projector mount, display mount or other ceiling-hung AV device. The plate measures 6 x 6 inches with a 0.7-inch profile and is rated by Chief for 500 lbs (226.8 kg). It carries OSHPD, UL Listed certifications, and its...

The Chief CMA115W is a 6-inch (152 mm) flat ceiling plate, the piece that ties a Chief ceiling-mount assembly to the building structure. It fastens to the structural ceiling above and provides the threaded connection point for a Chief extension column, which in turn carries a projector mount, display mount or other ceiling-hung AV device. The plate measures 6 x 6 inches with a 0.7-inch profile and is rated by Chief for 500 lbs (226.8 kg). It carries UL Listed certification, and its white...

The Chief CMA151 is a threaded in-line reducer that joins 1.5-inch NPT hardware to a 1-inch NPT column. It is the part to reach for when a ceiling plate or structural adapter uses Chief's standard 1.5-inch threading but the column or mount below it is 1-inch, or vice versa in a mixed-hardware retrofit. Chief lists it as compatible with its CMA and CMS ceiling accessories and with RPA Series projector mounts. The adapter is compact at 1.5 x 1.5 x 0.9 inches, is rated for 250 lbs, and carries UL...

The Chief CMA152 is an in-line threaded coupler for 1.5-inch NPT extension columns. When the drop from the ceiling structure to a projector or ceiling-hung display is longer than a single column, the CMA152 threads onto the end of one column and accepts the next, producing a single continuous run. That lets installers build the exact length they need from standard column sizes instead of ordering custom pipe. The coupler is rated by Chief at 500 lbs, carries a UL listing, and measures 3.8...

The Chief CMA160 Electrical Storage Enclosure is a steel job box that sits in line between two extension columns, normally hidden above a suspended or finished ceiling. Instead of leaving power connections, signal cable slack and small interface devices loose in the plenum, the CMA160 gathers them in one enclosure right on the projector's support column. The upper column runs to the structural ceiling attachment, the lower column continues down to the projector mount, and cabling can pass...

The Chief CMA165 Internal Joist Ceiling Kit is designed for residential and light-commercial rooms where the ceiling is already finished or the joists are hidden. Rather than opening a large section of drywall, the installer cuts a 4-inch hole, slides the expanding brace into the joist bay and spreads it to fit 16-inch or 24-inch on-center framing. A standard fan-mount junction box fastens to the brace, and the included 5-inch round plate mates with that box and accepts a 1.5-inch NPT...

The Chief CMA170 In-Ceiling Storage Enclosure gives a compact computer, media player or similar AV component a dedicated home above the ceiling, close to the projector or display it serves. Keeping that hardware in the ceiling frees up credenza and lectern space, shortens cable runs to the projector and keeps equipment away from curious hands. Chief classes it as a ceiling component-storage accessory with a 25 lb capacity and an overall size of 14.3 x 4.3 x 15.2 inches, a slim profile meant...

The Chief CMA170W In-Ceiling Storage Enclosure gives a compact computer, media player or similar AV component a dedicated home above the ceiling, close to the projector or display it serves. Keeping that hardware in the ceiling frees up credenza and lectern space, shortens cable runs to the projector and keeps equipment away from curious hands. Chief classes it as a ceiling component-storage accessory with a 25 lb capacity and an overall size of 14.3 x 4.3 x 15.2 inches, a slim profile meant...

The Chief CMA270 Threaded Pipe Coupler connects two 1.5-inch NPT extension columns so you can stack standard lengths into one continuous drop for a projector or ceiling-hung display. Only about 2.1 inches tall and 2.2 inches across, it keeps the joint compact and visually tidy, which matters in exposed-structure rooms where the column is on display. Chief rates the coupler at 500 lbs, matching the capacity of its 1.5-inch NPT column system. Use it when the required drop exceeds a single column...

The Chief CMA270W is the white version of Chief's CMA270 threaded pipe coupler. It joins two 1.5-inch NPT extension columns so you can stack standard lengths into one continuous drop for a projector or ceiling-hung display, and its white finish keeps the joint discreet against white columns, mounts and ceilings. The CMA270 family is a compact coupler, roughly 2.1 inches tall, rated by Chief at 500 lbs. Use it when the required drop exceeds a single column length, or to split a run around a...