Accessories

The C2N-HBLOCK is a parallel distribution block for termination of multiple Cresnet cables. Three different types of connectors are provided to accommodate all types of Cresnet wiring including standard 4-wire Cresnet cable, Cresnet "High-Power" cable, and RJ11 modular cables. Diagnostic LEDs indicate presence of network power and data. A mounting plate (included) provides for standalone surface mounting. Up to three units may be rack mounted together using the optional CNXRMAK rack mount kit...

The C2N-TXM-C50 is a 50-foot indoor/outdoor extension cable used to extend the length of the cable for the high-gain antenna provided with the C2N-TXM XM Satellite Radio tuner and Adagio XM Satellite Radio products. Up to two (2) C2N-TXM-C50 extensions may be used together to provide a maximum total length of 120 feet when combined with the antenna's integral 20-foot cable.

50 ft. (15 m) plenum rated 26/2 mini-coax cable supporting (1) unbalanced stereo audio signal. May also be used for S-Video or composite video signals.

USB Cable, Type A Male to Micro-B Male, 6 ft (1.83 m)

The CNXRMIRD is an optional infrared (IR) receiver designed for use with a control system or room solution box that includes an IR input port. The CNXRMIRD affords cost-effective control from any Crestron or third-party universal IR remote utilizing the RC5 command set.

Provides extra BNC connectors for use with Crestron intelliClass systems. These connectors afford fast and easy termination of our mini-coax video cables for achieving custom cable lengths or changing connector types in the field. Installation requires IDEAL Omni Seal 30-793 or equivalent compression tool (not included).

Provides extra RCA connectors for use with Crestron intelliClass systems. These connectors afford fast and easy termination of our mini-coax video and audio cables for achieving custom cable lengths or changing connector types in the field. Installation requires IDEAL Omni Seal 30-793 or equivalent compression tool (not included).

The CRESFIBER-CONN-SC50UM-12 is a pack of twelve SC type fiber optic cable connectors designed for use with Crestron CresFiber 8G Multimode Fiber Optic Cable (CRESFIBER8G)[1]. The connectors are field-installable using the CRESFIBER-TK termination kit

The CresFiber Termination Kit provides a fast, reliable solution for terminating Crestron CresFiber, CresFiber 8G, and CresFiber 8G Single-Mode fiber optic cable. Suitable for use in the field or at the shop, this kit includes everything needed to ensure consistent high-quality results using either CRESFIBER-CONN-SC50UM-12 or CRESFIBER8G-SM-CONN-LC-12 connectors (each sold separately).

The CRESFIBER8G-SM-CONN-LC-12 is a pack of twelve factory pre-polished LC type fiber optic cable connectors designed for use with Crestron CresFiber 8G SM Single-Mode Fiber Optic Cable (CRESFIBER8G-SM). The connectors are field-installable using the CRESFIBER-TK termination kit

The Crestron CSP-LIR-USB IR Learner is a compact USB device that works in conjunction with the Device Learner software tool (part of Crestron Toolbox) to provide a complete solution for creating, editing, testing, and managing IR device control files for use in programming a Crestron control system. The IR Learner simply plugs into the USB host port of a laptop computer running Crestron Toolbox software, providing the essential interface for learning IR commands from a third-party remote, and...

Provides a professional crimping tool for terminating Crestron DigitalMedia G Cable using DM-8G-CONN shielded RJ45 connectors.

Provides a professional crimping tool for terminating Crestron DigitalMedia G Cable using DM-8G-CONN-WG shielded RJ45 connectors.

Provides a professional crimping tool for terminating Crestron DigitalMedia G Cable using DM-8G-CONN-WG shielded RJ45 connectors.

The DM-CONN is a shielded RJ45 connector designed for use in terminating Crestron DM-CBL DigitalMedia™ Cable and DM-CBL-ULTRA DigitalMedia Ultra Cable. This connector requires no special tool to install, affording fast and reliable termination in the field of the shielded twisted-pair cable.The DM-CONN is sold in packages of 20 (Model # DM-CONN-20).NOTE: For termination of DigitalMedia 8G™ Cable (DM-CBL-8G), please see the DM-8G-CONN or DM-8G-CONN-WG. Key FeaturesHigh-bandwidth, shielded RJ45...

The DM-CONN-ULTRA-RECP is a shielded CAT6a RJ45 jack designed for use with the Crestron DigitalMedia 24-Port Keystone Patch Panel (model DM-RPP-K24) or any keystone wall plate. It fits in a standard keystone module opening and can be field-terminated in as little as 60 seconds using the tool provided. Using the DM-CONN-ULTRA-RECP in combination with DM Ultra cable ensures the highest performance and reliability for distributing uncompressed 4K/60 video over cable lengths up to 330 ft (100 m)...

The DM-CONN-ULTRA-RECP is a shielded CAT6a RJ45 jack designed for use with the Crestron DigitalMedia 24-Port Keystone Patch Panel (model DM-RPP-K24) or any keystone wall plate. It fits in a standard keystone module opening and can be field-terminated in as little as 60 seconds using the tool provided. Using the DM-CONN-ULTRA-RECP in combination with DM Ultra cable ensures the highest performance and reliability for distributing uncompressed 4K/60 video over cable lengths up to 330 ft (100 m)...

Allows two cable retractors to be installed in the middle positions of either module row within a Crestron® FT2‑1400 Series FlipTop™.

Allows a single cable retractor to be installed in the middle position within a Crestron® FT2-202 Series FlipTop™.

Allows a single cable retractor to be installed in the middle position of either module row within a Crestron® FT2‑700 Series FlipTop™

This accessory is designed for use with Crestron600 Series FlipTop and CBLR Cable Retractors. One spacer insert is required to fill each unused cable retractor space. The FTA-CBLRA-INSERT-2WIRE-102 includes two grommeted holes, which may be used to accommodate non-retracting cables. Blank caps are also provided to cover the holes if unneeded.

The IRP2 is an IR (infrared) emitter probe designed to adhere directly over the IR sensor window of a television, DVD player, or any other IR controllable device. The IRP2 connects to any Crestron control system with a 2-pin terminal block type Crestron iR port, providing a 1-way IR control interface to the device. The IRP2 is composed of an infrared LED housed in a miniature shell. Its integral 7 foot cable may be extended up to 1000 feet using ordinary twisted pair cable. Includes IR mask...

Designed specifically for use with the Crestron Mercury™ Tabletop Conference System (CCS-UC-1), the CBL-MULTI-HD-6 provides an easy-to-use, multi-format HD video connectivity solution for laptops and other video sources. It replaces multiple separate cables, converters, and dongles with a single multi-headed cable that supports all the common connections used by modern laptop computers and mobile devices. Using the CBL-MULTI-HD-6, anyone can simply choose the connector that fits their device,...

Two RJ45 STP CAT6 connection plate Niko - White