Products 73-96 of 575
Show
Blustream IRCAB 3.5mm Mono to 3.5mm Stereo IR Control Cable, 12V to 5V Step-Down, 1.95m
Retail: $31.95
IR control and link cable from 3.5mm mono to 3.5mm stereo with 12V to 5V step-down conversion, for connecting control system IR outputs to Blustream IR inputs. 1.95m long, 20kHz to 55kHz.
Price: $26.95
Availability: In Stock
Item #: IRCAB -

The Blustream IRCAB connects the IR output of a control system or other device to the IR input of Blustream matrices, extenders and video over IP products. It converts from a 3.5mm mono plug to a 3.5mm stereo plug and steps 12V signals down to 5V so the two sides talk reliably. Blustream supplies one with several of its matrices, and it is a handy spare for any integration rack.Key FeaturesMono to stereo conversion12V to 5V step-down20kHz to 55kHz frequency range1.95m lengthIdeal...

Blustream RSCAB RS-232 DB9 to 3-Pin Phoenix Connector Serial Cable, 1.8m
Genuine Blustream serial cable with a DB9 RS-232 connector on one end and a 3-pin Phoenix connector on the other, 1.8m long, for connecting control systems or PCs to Blustream products with Phoenix-style RS-232 ports.
Price: $7.00
Availability: In Stock
Item #: RSCAB -

The Blustream RSCAB adapts a standard DB9 serial port to the 3-pin Phoenix RS-232 terminals used on many Blustream matrices, switchers, extenders and power products. It is the same style of DB9 to 3-pin Phoenix serial lead Blustream packs with products such as the PWR8VDC and HMXL42ARC-KIT, so it makes an easy spare when a lead has gone missing or a second control connection is needed.Key FeaturesDB9 serial to 3-pin Phoenix connector1.8m cable lengthIdeal ApplicationsRS-232 control of...

BSSBLU-100
Signal Processor 12x8 With Blu Link
Price: $3,600.00
Availability: In Stock
Item #: BLU-100 -

The BLU-100 offers a fixed configuration of 12 inputs and 8 outputs, configurable signal processing and a high bandwidth, fault tolerant digital audio bus. The BLU-100 is compatible with the entire Soundweb London family, and its 48-channel digital audio bus represents channels 1-48 of the larger 256 channel digital audio bus when integrated with the BLU-800, BLU-320, BLU-160, BLU-120 and BLU-BOB devices. 12 Control Inputs and 6 Logic Outputs allow the BLU-100 to be integrated with GPIO...

BSSBLU-50V2
4x4 Signal Processor with BLU link 4 Analog Mic/line Input 4 Analong Output
Price: $1,915.00
Availability: In Stock
Item #: BLU-50V2 -

BSSEC-4BV-BLK-US
Ethernet Controller With 4 Buttons And Volume (Black - Us)
Price: $445.00
Availability: In Stock
Item #: EC-4BV-BLK-US -

BSSEC-4BV-WHT-US
Ethernet Controller With 4 Buttons And Volume (White)
Price: $445.00
Availability: In Stock
Item #: EC-4BV-WHT-US -

The EC-4BV contains a single Ethernet port for configuration, control, monitoring, and power via PoE. The EC-4BV is configured via simple drag-and-drop operations within the software application HiQnet Audio Architect.

BSSEC-8BV-BLK-US
Ethernet Controller With 8 Buttons And Volume (Black - Us)
Price: $585.00
Availability: In Stock
Item #: EC-8BV-BLK-US -

BSSEC-8BV-WHT-US
Ethernet Controller With 8 Buttons And Volume (White - Us)
Price: $585.00
Availability: In Stock
Item #: EC-8BV-WHT-US -

Crown CDi 1000 two-channel installed-sound power amplifier, front panel view, 2 RU rack-mount
2 Channel X 500w @ 4? - 70v Power Amplifier +Dsp 2ru
Price: $1,803.00
Availability: In Stock
Item #: CDi1000 -

The Crown CDi 1000 is a two-channel installed-sound power amplifier built for commercial systems such as restaurants, retail spaces, schools and houses of worship. It delivers 500 W per channel into 4 ohms and can drive low-impedance speakers or 70 V and 140 V distributed lines. Onboard DSP provides crossovers, EQ, delay and limiting, so many jobs need no outboard processor. It fits a standard 19-inch rack in two rack spaces and uses a universal switch-mode power supply. Note that this is the...

Crown CDi 2000 two-channel installed-sound power amplifier, front panel view, 2 RU rack-mount
2 Channel X 800w @ 4? - 70v Power Amplifier +DSP 2RU
Price: $2,472.00
Availability: Low inventory - chat with us to confirm stock
Item #: CDi2000 -

The Crown CDi 2000 is a two-channel installed-sound power amplifier built for commercial systems such as restaurants, retail spaces, schools and houses of worship. It delivers 800 W per channel into 4 ohms and can drive low-impedance speakers or 70 V and 140 V distributed lines. Onboard DSP provides crossovers, EQ, delay and limiting, so many jobs need no outboard processor. It fits a standard 19-inch rack in two rack spaces and uses a universal switch-mode power supply. Note that this is the...

Crown CDi 2-300 2-channel DriveCore installed-sound power amplifier, front view, 2 RU rack-mount
2 Channel X 300w @ 4?, 8?, 70v And 100v Power Amplifier + Dsp 2ru
Price: $1,798.00
Availability: In Stock
Item #: CDi2x300 -

The Crown CDi 2|300 is a 2-channel installed-sound power amplifier from the CDi DriveCore series. It delivers 300 W per channel into 4 ohms, and every channel can drive 70 V or 100 V distributed lines directly. The two channels can also be bridged into one higher-power mono output. Onboard DSP covers input routing, parametric EQ, crossover, delay and limiting, and the amplifier can be configured and monitored over a network with HiQnet Audio Architect. It is a light, 2 RU rack-mount unit...

Crown CDi 2-600 2-channel DriveCore installed-sound power amplifier, front view, 2 RU rack-mount
2 Channel X 600w @ 4?, 8?, 70v And 100v Power Amplifier + Dsp 2ru
Price: $2,375.00
Availability: In Stock
Item #: CDi2x600 -

The Crown CDi 2|600 is a 2-channel installed-sound power amplifier from the CDi DriveCore series. It delivers 600 W per channel into 4 ohms, and every channel can drive 70 V or 100 V distributed lines directly. The two channels can also be bridged into one higher-power mono output. Onboard DSP covers input routing, parametric EQ, crossover, delay and limiting, and the amplifier can be configured and monitored over a network with HiQnet Audio Architect. It is a light, 2 RU rack-mount unit...

Crown CDi 4-300 4-channel DriveCore installed-sound power amplifier, front view, 2 RU rack-mount
4 Channel X 300w @ 4?, 8?, 70v And 100v Power Amplifier + Dsp 2ru
Price: $3,070.00
Availability: In Stock
Item #: CDi4x300 -

The Crown CDi 4|300 is a 4-channel installed-sound power amplifier from the CDi DriveCore series. It delivers 300 W per channel into 4 ohms, and every channel can drive 70 V or 100 V distributed lines directly. Channels can be bridged in pairs for higher-power mono outputs. Onboard DSP covers input routing, parametric EQ, crossover, delay and limiting, and the amplifier can be configured and monitored over a network with HiQnet Audio Architect. It is a light, 2 RU rack-mount unit suited to...

Crown CDi DriveCore 4x600 four-channel 2-RU power amplifier with DSP, front view
4 Channel X 600w @ 4?, 8?, 70v And 100v Power Amplifier + Dsp 2ru
Price: $4,090.00
Availability: In Stock
Item #: CDi4x600 -

The Crown CDi DriveCore 4|600 is a four-channel, 2-RU installed-sound power amplifier built for mid-sized venues such as cinemas, houses of worship, bars and lounges. Each channel is rated at 600 watts into 4 ohms, and it can also drive 70 V or 100 V distributed lines directly without a transformer. Onboard DSP, a front-panel interface and network control and monitoring make it practical to configure and supervise a whole rack of amplifiers from one place. Channels can be bridged in pairs for...

Crown GRM2 double rack-mount kit: two angle brackets and two mounting plates for side-by-side MA-series power amplifiers
Rm2 Rack Mounting Kit For Mounting Two Ma Series Units Side By Side 2ru
Price: $42.00
Availability: In Stock
Item #: GRM2 -

The Crown GRM2 is a double rack-mount kit, an accessory rather than an amplifier. It is made for installers who want to put two Crown MA-series power amplifiers next to each other in a standard 19-inch equipment rack. Because an MA unit is 3.5 inches (2 RU) tall, the pair of side-by-side amplifiers takes up just two rack spaces, which keeps racks tidy and saves vertical room in compact installs. The kit mounts the amplifiers only and does not include any amplifier, so order the MA units...

Crown XLi 1500 two-channel 2-RU power amplifier, front view with shadow
Retail: $710.00
2 Channel X 450w @ 4? Power Amplifier 2ru
Price: $569.00
Availability: In Stock
Item #: XLi1500 -

The Crown XLi 1500 is a two-channel power amplifier from the budget-friendly XLi Series, aimed at mobile musicians, DJs, houses of worship, clubs and pubs. It is rated at 450 watts per channel into 4 ohms, a good fit for powering a pair of full-range cabinets or monitors. It sits in a 2-RU rack chassis with forced-air cooling and accepts balanced XLR or RCA inputs, while Speakon and binding-post outputs give you flexible speaker hookups. You can run it in stereo, parallel or bridge-mono mode...

Crown XLi 2500 two-channel 2-RU power amplifier, front view with shadow
Retail: $895.00
2 Channel X 750w @ 4? Power Amplifier 2ru
Price: $719.00
Availability: Low inventory - chat with us to confirm stock
Item #: XLi2500 -

The Crown XLi 2500 is a two-channel power amplifier from the budget-friendly XLi Series, aimed at mobile musicians, DJs, houses of worship, clubs and pubs. It is rated at 750 watts per channel into 4 ohms, enough headroom for larger mains or subwoofers in portable rigs. It sits in a 2-RU rack chassis with forced-air cooling and accepts balanced XLR or RCA inputs, while Speakon and binding-post outputs give you flexible speaker hookups. You can run it in stereo, parallel or bridge-mono mode and...

Crown XLi 3500 two-channel 2-RU power amplifier, front view with shadow
Retail: $1,335.00
2 Channel 1350w @ 4? Power Amplifier
Price: $1,069.00
Availability: In Stock
Item #: XLi3500 -

The Crown XLi 3500 is a two-channel power amplifier from the budget-friendly XLi Series, aimed at mobile musicians, DJs, houses of worship, clubs and pubs. Crown rates it at 1350 watts, the most powerful model in the series, for driving large mains or subwoofers in touring and fixed PA setups. It sits in a 2-RU rack chassis with forced-air cooling and accepts balanced XLR or RCA inputs, while Speakon and binding-post outputs give you flexible speaker hookups. You can run it in stereo, parallel...

Crown XLi 800 two-channel 2-RU power amplifier, front view with shadow
Retail: $520.00
2 Channel X 300w @ 4? Power Amplifier 2ru
Price: $419.00
Availability: In Stock
Item #: XLi800 -

The Crown XLi 800 is a two-channel power amplifier from the budget-friendly XLi Series, aimed at mobile musicians, DJs, houses of worship, clubs and pubs. It is rated at 300 watts per channel into 4 ohms, a sensible choice for small monitor rigs, DJ setups and bar installs. It sits in a 2-RU rack chassis with forced-air cooling and accepts balanced XLR or RCA inputs, while Speakon and binding-post outputs give you flexible speaker hookups. You can run it in stereo, parallel or bridge-mono mode...

Crown XLS 1002 DriveCore 2 two-channel Class D power amplifier, front view
Retail: $625.00
2 Channel X 350w @ 4? Power Amplifier + Dsp 2ru
Price: $500.00
Availability: Low inventory - chat with us to confirm stock
Item #: XLS1002 -

The Crown XLS 1002 is a two-channel Class D power amplifier from the XLS DriveCore 2 Series, rated at 350 watts per channel into 4 ohms. DriveCore technology keeps it highly efficient, so the 2-RU chassis weighs only 8.6 pounds, which makes it an easy fit for portable PA rigs, small venues and rental racks. Compared with the first-generation XLS it adds more DSP, including a band-pass filter on each channel and the PureBand crossover, along with Peakx limiting, a larger LCD and a dimmable LED...

Crown XLS 1502 two-channel Class D power amplifier, front panel with LCD, black rack-mount chassis
Retail: $810.00
2 Channel 525w Per @ 4? Power Amplifier
Price: $650.00
Availability: In Stock
Item #: XLS1502 -

The Crown XLS 1502 is a two-channel, Class D power amplifier from the XLS DriveCore 2 line, built for installers, bands, DJs and venues that need clean, dependable power from a compact, light rack unit. It delivers 525 watts per channel into 4 ohms and can be bridged to mono for subwoofers or a single high-demand speaker. Selectable input sensitivity, onboard filtering and speaker-protecting limiters make setup quick, and the front LCD and controls keep level and status information easy to...

Crown XLS 2002 two-channel Class D power amplifier, front panel with LCD, black rack-mount chassis
Retail: $990.00
2 Channel 650w Per @ 4? Power Amplifier
Price: $795.00
Availability: In Stock
Item #: XLS2002 -

The Crown XLS 2002 is a two-channel, Class D power amplifier in the XLS DriveCore 2 family, aimed at touring musicians, mobile DJs, houses of worship and installed systems that want serious headroom without a heavy amp. It puts out 650 watts per channel into 4 ohms and can be bridged to mono for a single big speaker or a subwoofer. Switchable input sensitivity, per-channel filtering and speaker-protecting limiters make it easy to tune, and the front LCD shows what the amplifier is doing at a...

Crown XTi 1002 two-channel DSP power amplifier, front panel view of the black 19-inch rack chassis
2 Channel X 500w @ 4? Power Amplifier + Dsp 2ru
Price: $1,145.00
Availability: In Stock
Item #: XTI1002 -

The Crown XTi 1002 is a two-channel power amplifier with onboard DSP, part of the XTi 2 Series, built for touring rigs, clubs, houses of worship and fixed installs that want amplification and speaker processing in one rack unit. It delivers 500 watts per channel into 4 ohms, so it pairs well with mid-sized mains and monitors. Built-in EQ, crossovers, delay and limiting can replace outboard processors, and settings are managed through Crown's HiQnet software. Confirm included accessories with...

Crown XTi 2002 two-channel DSP power amplifier, front panel view of the black 19-inch rack chassis
2 Channel, 800w @ 4? Power Amplifier
Price: $1,595.00
Availability: In Stock
Item #: XTI2002 -

The Crown XTi 2002 is a two-channel power amplifier with onboard DSP from the XTi 2 Series, suited to concert sound, clubs, theaters and installed systems that need real power and built-in speaker processing in a single rack chassis. It delivers 800 watts per channel into 4 ohms and holds up to 2-ohm loads for demanding speaker setups. Onboard EQ, crossovers, delay and limiting can take the place of separate processors, and HiQnet software handles setup and recall. Confirm included accessories...