• Four channels at 600 W each into 4 ohms and 8 ohms
  • Drives 70 V and 100 V lines directly, no step-up transformer needed
  • Bridge pairs of channels to mono for up to 1200 W into 8 ohms
  • Built-in DSP with a front-panel interface for setup on site
  • Network control and monitoring, plus a control port
  • Speaker tunings for JBL loudspeakers preloaded in the CDi DriveCore line
  • Compact 2-RU, 16.3 lb chassis that saves rack weight and space
Price: $4,090.00
    Availability: In Stock
    Usually ships In 24 - 48 hours

    Item #: CDi4x600

    Description

    The Crown CDi DriveCore 4|600 is a four-channel, 2-RU installed-sound power amplifier built for mid-sized venues such as cinemas, houses of worship, bars and lounges. Each channel is rated at 600 watts into 4 ohms, and it can also drive 70 V or 100 V distributed lines directly without a transformer. Onboard DSP, a front-panel interface and network control and monitoring make it practical to configure and supervise a whole rack of amplifiers from one place. Channels can be bridged in pairs for 1200 watts into 8 ohms when you need more output per speaker.

    Key Features

    • Four channels at 600 W each into 4 ohms and 8 ohms
    • Drives 70 V and 100 V lines directly, no step-up transformer needed
    • Bridge pairs of channels to mono for up to 1200 W into 8 ohms
    • Built-in DSP with a front-panel interface for setup on site
    • Network control and monitoring, plus a control port
    • Speaker tunings for JBL loudspeakers preloaded in the CDi DriveCore line
    • Compact 2-RU, 16.3 lb chassis that saves rack weight and space

    Specifications

    Channels4
    Power per channel, 4 ohm600 W
    Power per channel, 8 ohm600 W
    Power per channel, 2 ohm300 W
    Power per channel, 70 V / 100 V600 W
    Bridged mono, 8 ohm1200 W
    DSPYes
    Network controlYes (no BLU link)
    Frequency response (20 Hz-20 kHz, 8 ohm)+/-0.25 dB
    THD (20 Hz-20 kHz, full power)0.35%
    Damping factor (20-100 Hz)>1000
    Input impedance20 kohm balanced / 10 kohm unbalanced
    Dimensions (W x H x D)19 x 3.5 x 12.25 in (2 RU)
    Weight16.3 lb (7.39 kg)
    AC connector15 A IEC, 100-240 V