• 2 channels, each rated 300 W into 4 ohms
  • Direct-drive 70 V and 100 V outputs on every channel, no output transformer needed
  • Bridge-mono mode for 600 W into 8 ohms or 140 V / 200 V lines
  • Onboard DSP: input router, 8-band input and output parametric EQ, crossover, delay and LevelMAX limiter
  • Network control and monitoring through HARMAN HiQnet Audio Architect
  • Front-panel interface plus a GPIO/AUX port for preset recall, mute, fault monitoring and power control
  • Preloaded JBL speaker tunings; compact 2 RU, 19 in chassis
Price: $1,798.00
    Availability: In Stock
    Usually ships In 24 - 48 hours

    Item #: CDi2x300

    Description

    The Crown CDi 2|300 is a 2-channel installed-sound power amplifier from the CDi DriveCore series. It delivers 300 W per channel into 4 ohms, and every channel can drive 70 V or 100 V distributed lines directly. The two channels can also be bridged into one higher-power mono output. Onboard DSP covers input routing, parametric EQ, crossover, delay and limiting, and the amplifier can be configured and monitored over a network with HiQnet Audio Architect. It is a light, 2 RU rack-mount unit suited to restaurants, retail, hospitality and other small to mid-size commercial installs. This analog-input version does not include BLU link.

    Key Features

    • 2 channels, each rated 300 W into 4 ohms
    • Direct-drive 70 V and 100 V outputs on every channel, no output transformer needed
    • Bridge-mono mode for 600 W into 8 ohms or 140 V / 200 V lines
    • Onboard DSP: input router, 8-band input and output parametric EQ, crossover, delay and LevelMAX limiter
    • Network control and monitoring through HARMAN HiQnet Audio Architect
    • Front-panel interface plus a GPIO/AUX port for preset recall, mute, fault monitoring and power control
    • Preloaded JBL speaker tunings; compact 2 RU, 19 in chassis

    Specifications

    Channels2
    Rated power300 W per channel @ 4 ohm
    Dual mode (all channels driven)2 ohm: 150 W; 4 ohm: 300 W; 8 ohm: 300 W; 16 ohm: 150 W; 70 V: 300 W; 100 V: 300 W
    Bridge mono4 ohm: 300 W; 8 ohm: 600 W; 16 ohm: 600 W; 140 V: 600 W; 200 V: 600 W
    Sensitivity0.7 V RMS for full power at 8 ohm
    THD0.35% (full power, 20 Hz - 20 kHz)
    Damping factor> 1000 (20 - 100 Hz)
    Frequency response±0.5 dB, 20 Hz - 20 kHz
    Crosstalk> 80 dB
    Input impedance20 kΩ balanced, 10 kΩ unbalanced
    DSPInput router, 8-band input/output PEQ, crossover, input delay to 1000 ms, output delay to 100 ms, LevelMAX limiter
    ControlHiQnet Audio Architect over network; GPIO/AUX port; front panel
    BLU linkNo
    Dimensions (H x W x D)3.5 x 19 x 12.25 in
    Weight14.56 lb (6.6 kg)
    Power connectorIEC 320, 100-240 V~