• Two-channel power amplifier delivering 500 W per channel into 4 ohms (275 W at 8 ohms, 700 W at 2 ohms)
  • Onboard DSP with parametric EQ on inputs and outputs, per-channel high-pass and low-pass crossover filters and up to 50 ms of delay per channel for aligning speakers
  • Peakx Plus limiters with adjustable threshold, attack and release, plus a subharmonic synthesizer with adjustable frequency, gain and filter type
  • 50 presets (49 user-definable) and HiQnet control, including Band Manager or Audio Architect software over USB, so system settings can be saved and recalled
  • Three user-selectable fan modes (normal, early, full speed) and software monitoring of AC line voltage and power supply temperature
  • Cast-aluminum handles and a locking power cord clip for road and rack use
  • Rack chassis 3.5 in tall and 12.25 in deep at 18.5 lb
Price: $1,145.00
    Availability: In Stock
    Usually ships In 24 - 48 hours

    Item #: XTI1002

    Description

    The Crown XTi 1002 is a two-channel power amplifier with onboard DSP, part of the XTi 2 Series, built for touring rigs, clubs, houses of worship and fixed installs that want amplification and speaker processing in one rack unit. It delivers 500 watts per channel into 4 ohms, so it pairs well with mid-sized mains and monitors. Built-in EQ, crossovers, delay and limiting can replace outboard processors, and settings are managed through Crown's HiQnet software. Confirm included accessories with 4TEC Direct.

    Key Features

    • Two-channel power amplifier delivering 500 W per channel into 4 ohms (275 W at 8 ohms, 700 W at 2 ohms)
    • Onboard DSP with parametric EQ on inputs and outputs, per-channel high-pass and low-pass crossover filters and up to 50 ms of delay per channel for aligning speakers
    • Peakx Plus limiters with adjustable threshold, attack and release, plus a subharmonic synthesizer with adjustable frequency, gain and filter type
    • 50 presets (49 user-definable) and HiQnet control, including Band Manager or Audio Architect software over USB, so system settings can be saved and recalled
    • Three user-selectable fan modes (normal, early, full speed) and software monitoring of AC line voltage and power supply temperature
    • Cast-aluminum handles and a locking power cord clip for road and rack use
    • Rack chassis 3.5 in tall and 12.25 in deep at 18.5 lb

    Specifications

    Channels2
    Power per channel, 8 ohm275 W
    Power per channel, 4 ohm500 W
    Power per channel, 2 ohm700 W
    Bridged, 8 ohm1,000 W
    Bridged, 4 ohm1,400 W
    Input sensitivity1.4 V
    Signal-to-noise (A-weighted)100 dB
    THD< 0.5%
    Frequency response+0 / -1 dB, 20 Hz to 20 kHz at 1 W
    Crosstalk> 70 dB (20 Hz to 1 kHz)
    Dimensions (H x W x D)3.5 x 19 x 12.25 in (8.9 x 48.3 x 31.1 cm)
    Weight18.5 lb (8.4 kg)
    Shipping weight21.5 lb (9.75 kg)
    AC inlet15 A IEC