• Two-channel design with stereo, parallel and bridge-mono operation
  • Selectable input sensitivity: 0.775 V or 1.4 V
  • Electronically balanced XLR and RCA inputs
  • Speakon and binding-post speaker outputs
  • Forced-air cooling in a 2-RU rack chassis
  • Per-channel LEDs for signal, clip and fault
  • Protection against shorts, no-load conditions, RF and on/off thumps
Retail: $710.00
Price: $569.00
You Save: $141.00 (19.9%)
    Availability: In Stock
    Usually ships In 24 - 48 hours

    Item #: XLi1500

    Description

    The Crown XLi 1500 is a two-channel power amplifier from the budget-friendly XLi Series, aimed at mobile musicians, DJs, houses of worship, clubs and pubs. It is rated at 450 watts per channel into 4 ohms, a good fit for powering a pair of full-range cabinets or monitors. It sits in a 2-RU rack chassis with forced-air cooling and accepts balanced XLR or RCA inputs, while Speakon and binding-post outputs give you flexible speaker hookups. You can run it in stereo, parallel or bridge-mono mode and pick between two input sensitivities to match your mixer or processor. Front-panel indicators show signal, clipping and fault status for each channel, and built-in protection guards against shorts, open loads and turn-on thumps.

    Key Features

    • Two-channel design with stereo, parallel and bridge-mono operation
    • Selectable input sensitivity: 0.775 V or 1.4 V
    • Electronically balanced XLR and RCA inputs
    • Speakon and binding-post speaker outputs
    • Forced-air cooling in a 2-RU rack chassis
    • Per-channel LEDs for signal, clip and fault
    • Protection against shorts, no-load conditions, RF and on/off thumps

    Specifications

    Channels2
    Rated power450 W per channel at 4 ohms
    Voltage gain31 dB
    Frequency response (1 W)20 Hz-20 kHz, +0/-1 dB
    THD (20 Hz-20 kHz)<0.5%
    Damping factor (8 ohm, 10-400 Hz)>200
    Signal-to-noise (A-weighted)>100 dB
    Input sensitivity (8 ohm full power)0.775 V or 1.4 V
    Input impedance20 kohm balanced / 10 kohm unbalanced
    InputsXLR and RCA
    OutputsSpeakon and binding posts
    Dimensions (W x H x D)19 x 3.5 x 12.4 in (2 RU)
    Weight28 lb (12.7 kg)
    AC connector15 A IEC