Accessories

The D16Mio is a high performance, high channel density networked audio interface supporting Dante with AES67 interoperability. The D16Mio features 16 channels of studio grade microphone preamplifiers using THATCorporation mic preamp technology, with up to 51 dB of digitally controlled gain in 3 dB steps. Each mic input also supports P48 switchable phantom power and a switchable pad accommodation of pro line level inputs. The balanced line level outputs feature digitally controlled output...

The unDX2IO+ Dante Audio Interface is a cost effective multi-IO wall box. The unDX2IO+ features two balanced mic/line XLR inputs, two balanced XLR line outputs, and a further two balanced line inputs on de-pluggable connectors on the side of the unit. All inputs and outputs can be used simultaneously and all audio channels are available separately. The unDX2IO+ is designed to fit into all dual gang US junction boxes, mud rings, and old work brackets. The unDX2IO+ is PoE enabled, so all...

The QSC CR1 CTO is a configure-to-order accessory item associated with QSC Q-SYS Core / I/O card-frame builds, in the same low-cost accessory category as the RP1 rear plate kit. It is a hardware fitting used when a Core or I/O Frame chassis is specified and populated, rather than a standalone processor or amplifier.Key FeaturesConfigure-to-order (CTO) accessory for Q-SYS card-frame systemsShips as a small fitting/kit rather than an active deviceOrdered alongside Core / I/O Frame...

ext-ps121.5aip-3p-6 is the power supply for the following models of Gefen products: EXT models with the 3 pin connector and 12V rating. 

The QSC Q-SYS I/O Frame is a rack-mount audio input/output expander for the Q-SYS platform, and the CTO (Configure-To-Order) designation means the frame is supplied as a base chassis to be fitted with the I/O cards a project needs. It provides local, physical connectivity between a Q-SYS system and the analog and digital audio devices around it.Key FeaturesFour I/O card slots, mixed and matched in any combinationSupports mic/line input, line output, DataPort and AES digital cardsUp to 16 x 16...

The QSC SL-QSE-8N-P is a perpetual Q-SYS Scripting Engine software license for compatible Q-SYS cores such as the Core Nano, Core 8 Flex and Core-capable NV-32-H. It unlocks Lua-based scripting and Block Controller logic within Q-SYS Designer, letting integrators build custom automation, conditional control, timers and third-party device integration on the core. As a software license, it delivers no hardware; it enables scripting capability on an eligible processor.Key FeaturesPerpetual Q-SYS...

The QSC AC-MR4 is a flanged mud-ring (rough-in) bracket used to pre-install QSC AC-C4T AcousticCoverage ceiling speakers in sheetrock or plaster surfaces. It is an installation accessory, not a speaker. Fitted during construction before the ceiling is finished, the mud ring establishes the cutout and provides a clean, flush edge so the speaker can be dropped in later without damaging the surrounding surface. This is typically sold as a box of six, matching multi-speaker install projects. Using...

The QSC AC-MR6 is a flanged mud-ring (rough-in) bracket used to pre-install QSC AC-C6T AcousticCoverage ceiling speakers in sheetrock or plaster surfaces. It is an installation accessory, not a speaker. Installed during the construction phase before the ceiling is finished, the mud ring defines the speaker cutout and provides a neat, flush edge so the AC-C6T can be fitted later without disturbing the finished surface. It is generally supplied as a box of six for multi-speaker projects....

The QSC AC-MR8 is a flanged mud-ring (rough-in) bracket used to pre-install QSC AC-C8T AcousticCoverage ceiling speakers in sheetrock or plaster surfaces. It is an installation accessory, not a speaker. Fitted during construction before the ceiling is finished, the mud ring sets the speaker cutout and provides a clean, flush edge so the AC-C8T can be dropped in later without marring the surrounding surface. It is typically supplied as a box of six to suit multi-speaker installations. Using the...

The QSC AD-YMS10-BK is a black steel yoke mount for the QSC AcousticDesign AD-S10 / AD-S10T surface-mount loudspeaker. It is an installation accessory rather than a speaker. The U-shaped bracket cradles the cabinet and provides tilt and rotation adjustment so the speaker can be aimed accurately at the target coverage area on a wall or ceiling.Key FeaturesSteel yoke mount for the AcousticDesign AD-S10 / AD-S10T loudspeakerAdjustable tilt and rotation for precise aimingDurable black powder-coat...

The QSC AD-YMS12-BK is a black steel yoke mount for the QSC AcousticDesign AD-S12 / AD-S12T surface-mount loudspeaker. It is an installation accessory rather than a speaker. The heavy-duty U-bracket cradles the larger AD-S12 cabinet and provides tilt and rotation adjustment so installers can aim the speaker accurately at the intended coverage zone on a wall or ceiling.Key FeaturesSteel yoke mount for the AcousticDesign AD-S12 / AD-S12T loudspeakerAdjustable tilt and rotation for precise...

The QSC AD-YMS12-WH is a white steel yoke mount for the QSC AcousticDesign AD-S12 / AD-S12T surface-mount loudspeaker. It is a mounting accessory, not a loudspeaker. The heavy-duty U-bracket holds the larger AD-S12 cabinet and allows tilt and rotation for precise aiming, while the white finish blends into light-colored walls and ceilings.Key FeaturesSteel yoke mount for the AcousticDesign AD-S12 / AD-S12T loudspeakerAdjustable tilt and rotation for precise aimingWhite powder-coat finish for...

The QSC AF2102-LA-BK is a large aluminum array frame (rigging accessory) used to fly the QSC WideLine-10 WL2102 line array loudspeakers. This is not a loudspeaker itself; it is the top grid/bumper that suspends and sets the vertical splay of a hanging WL2102 array. Built for professional sound reinforcement, it lets integrators and touring crews deploy WideLine arrays safely with predictable geometry.Key FeaturesLarge-format aluminum flying frame for the QSC WideLine-10 (WL2102) arrayProvides...

Aluminum array frame for stacking four (4) or flying eight (8) WL218-sw subwoofers; available in black

Large array frame for use with WL3082 and WL212-sw; accommodates arrays of up to twelve (12) WL3082 or four (4) WL212-sw and twelve(12) WL3082; available in black

Small array frame for use with WL3082 and WL212-sw; accommodates arrays of up to twelve (12) WL3082 or two (2) WL212-sw and eight (8) WL3082; can also be used in conjunction with EB3082 to construct arrays with WL212-sw suspended behind WL3082; available in black

Yoke mount for the AP-5102. Available in black

The QSC AP-YM10-WH is a U-shaped yoke mounting bracket for the AcousticPerformance AP-5102 10-inch loudspeaker, finished in white. It bolts to the cabinet's M10 side inserts so the speaker can be surface-mounted on a wall or ceiling and then aimed and locked at the required tilt and pan angle. This is a mounting accessory only; the loudspeaker is not included.Key FeaturesYoke mount bracket for the QSC AP-5102 loudspeakerAllows tilt and pan aiming after installationAttaches to the cabinet's...