Audio & Video

Biamp Voltera D 4800.44800 W 4-Channel Networked Amplified Loudspeaker ControllerThe Biamp Voltera D 4800.4 is a networked amplified loudspeaker controller that combines 4800 watts of amplification across 4 channels with integrated loudspeaker processing. Each channel is rated at approximately 1200 W and can drive 4-ohm, 8-ohm, 70V, or 100V loads, letting a single unit serve mixed low-impedance and constant-voltage zones.Media networking is built in, with AVB, Dante, and AES67 support for...

Biamp Voltera D 4800.4M4800 W 4-Channel Networked Amplified Loudspeaker Controller with Onboard DSPThe Biamp Voltera D 4800.4M is a networked amplified loudspeaker controller that combines 4800 watts of amplification across 4 channels with integrated loudspeaker processing. Each channel is rated at approximately 1200 W and can drive 4-ohm, 8-ohm, 70V, or 100V loads, letting a single unit serve mixed low-impedance and constant-voltage zones. This M variant adds a fully programmable onboard DSP...

Biamp Voltera D 600.4M600 W 4-Channel Networked Amplified Loudspeaker Controller with Onboard DSPThe Biamp Voltera D 600.4M is a networked amplified loudspeaker controller that combines 600 watts of amplification across 4 channels with integrated loudspeaker processing. Each channel is rated at approximately 150 W and can drive 4-ohm, 8-ohm, 70V, or 100V loads, letting a single unit serve mixed low-impedance and constant-voltage zones. This M variant adds a fully programmable onboard DSP with...

Biamp VOLUME-8Rotary Volume Wall ControlThe Biamp VOLUME-8 is a wall-mounted rotary volume control that lets users adjust the listening level of a Biamp audio system directly from the room. Its simple, tactile knob provides intuitive gain control for staff and presenters without the need to access system software or the equipment rack.Connecting to the remote-control bus of a compatible Biamp processor, the VOLUME-8's function is assigned during system configuration so the underlying gain is...

Biamp VOLUME-SELECT-8Combined Volume and Source Selector Wall ControlThe Biamp VOLUME-SELECT-8 combines rotary volume control and eight-position source selection in a single wall-mounted panel. It gives users complete room-level control from one location, letting them both set the listening level and choose among available sources or presets without accessing the equipment rack.Connecting to the remote-control bus of a compatible Biamp processor, the panel's volume and selection functions are...

Biamp VS8 SMB-10Surface-Mount Back Box for Wall ControlThe Biamp VS8 SMB-10 is a surface-mount back box that provides a clean, secure enclosure for installing a Biamp wall control where an in-wall electrical box is not available or practical. It mounts directly to the wall surface and houses the control's wiring and connections in a tidy, finished package.This accessory is intended for use with Biamp remote wall controls, giving integrators a straightforward retrofit option in masonry, glass,...

Biamp Workplace BridgeCloud Connectivity Appliance for Biamp Workplace Device ManagementThe Biamp Workplace Bridge is a dedicated hardware appliance that links Biamp AV devices to the Biamp Workplace platform, providing a single, secure point of communication between on-site equipment and cloud-based management. It brings supported current-generation hardware online and, importantly, extends Biamp Workplace connectivity to legacy Tesira systems that would otherwise sit outside the...

Built in acoustic echo cancellation, noise cancellation, and beam selection eliminate the need for per-beam processing in a DSP mixer - requiring fewer DSP mixer resources.Built in 2x10 Watt into 8-ohm power amplifier conveniently drives loudspeakers.Integrated features can significantly reduce system design complexity, simplify installation, streamline configuration and programming, consume less rack space, and lower cost.Daisy chain ceiling tiles via P-Link for larger conference setups – for...

4 channel, 400W amplifier, with onboard DSP and Dante digital networking

The QSC CR1 CTO is a configure-to-order accessory item associated with QSC Q-SYS Core / I/O card-frame builds, in the same low-cost accessory category as the RP1 rear plate kit. It is a hardware fitting used when a Core or I/O Frame chassis is specified and populated, rather than a standalone processor or amplifier.Key FeaturesConfigure-to-order (CTO) accessory for Q-SYS card-frame systemsShips as a small fitting/kit rather than an active deviceOrdered alongside Core / I/O Frame...

Crestron HD-WP-4K-401-C 4K Multi-Window Video Processor with HDBaseT and HDMI Outputs The HD-WP-4K-401-C is a 4K multi-window video processor that combines four HDMI inputs with simultaneous HDMI and HDBaseT outputs. It can display up to four sources at once on a single screen, and its layout engine automatically reconfigures as sources are connected and disconnected, keeping the presentation current without manual intervention. Nine windowing modes span full screen, picture-in-picture,...

The QSC Synapse D32i (Attero Tech) is a high-channel-density networked audio interface that puts 32 balanced line-level inputs onto a Dante network with AES67 interoperability. In a single rack space it is designed to bring large numbers of analog sources into systems such as Q-SYS from a central rack.Key Features32 balanced line-level inputs on terminal blocksSoftware-selectable pad for +4 dBu or -10 dBV levelsFront-panel network audio level controlRedundant Gigabit networking (copper and...

ext-ps121.5aip-3p-6 is the power supply for the following models of Gefen products: EXT models with the 3 pin connector and 12V rating. 

The QSC Q-SYS I/O Frame is a rack-mount audio input/output expander for the Q-SYS platform, and the CTO (Configure-To-Order) designation means the frame is supplied as a base chassis to be fitted with the I/O cards a project needs. It provides local, physical connectivity between a Q-SYS system and the analog and digital audio devices around it.Key FeaturesFour I/O card slots, mixed and matched in any combinationSupports mic/line input, line output, DataPort and AES digital cardsUp to 16 x 16...

The Planar PS7050T is a 70-inch commercial-grade, interactive LED LCD display designed for 24/7 use in digital signage, featuring Full HD resolution (1920x1080), 10-point multi-touch, slim profile, built-in speakers, and support for Windows, macOS, and Linux, making it great for interactive applications with its durable, logo-free metal bezel for landscape or portrait orientation.

The QSC SL-QSE-8N-P is a perpetual Q-SYS Scripting Engine software license for compatible Q-SYS cores such as the Core Nano, Core 8 Flex and Core-capable NV-32-H. It unlocks Lua-based scripting and Block Controller logic within Q-SYS Designer, letting integrators build custom automation, conditional control, timers and third-party device integration on the core. As a software license, it delivers no hardware; it enables scripting capability on an eligible processor.Key FeaturesPerpetual Q-SYS...

The QSC AC-C2T is a compact 2.75-inch full-range ceiling loudspeaker from the AcousticCoverage Series, engineered for very wide, even coverage in commercial spaces. Its extremely broad 170-degree conical pattern lets integrators space speakers farther apart while maintaining consistent sound, making it efficient for background music and paging in lobbies, corridors, retail floors and offices. A multi-tap transformer supports 70V and 100V distributed audio systems, with an 8-ohm bypass for...

The QSC AC-C2T-LP is an AcousticCoverage low-profile ceiling loudspeaker built around a compact 2.75-inch two-way design. Its shallow, low-profile enclosure suits ceilings with limited plenum depth while still delivering intelligible speech and background music for retail, hospitality and other commercial spaces. A multi-tap transformer supports 70V and 100V distributed audio lines with a low-impedance bypass, so it drops easily into constant-voltage systems.Key Features2.75-inch two-way...