Audio & Video

Biamp Vocia VFOM-1-7VA-8600 7:1 Amplifier Failover ModuleThe Vocia VFOM-1-7 is a factory-installed 7:1 failover module for the VA-8600 amplifier, dedicating one backup amplifier channel to protect a group of seven primary channels. When a fault is detected on any protected channel, the module automatically transfers that load to the reserved backup so critical announcements continue.The 7:1 ratio maximizes the number of protected channels per backup, offering an efficient path to amplifier...

Biamp Vocia VI-6Networked Audio Input DeviceThe Vocia VI-6 is an input device that brings analog audio sources onto the Vocia network for distribution across a paging, background-music, and voice-evacuation system. It accepts balanced mic or line signals, digitizes them, and places them on the CobraNet audio network where they can be routed to any zone in the system design.Typical sources include background-music players, live microphones, and program feeds, all managed and supervised through...

Biamp Vocia VI-88-Channel Networked Audio Input DeviceThe Vocia VI-8 is an eight-channel live audio input device that places balanced analog sources onto the Vocia network for distribution across a paging, background-music, and voice-evacuation system. With eight independent inputs, it is well suited to venues that need to originate multiple live or program audio feeds from a single location.Each input is digitized and routed over the CobraNet audio network, with configuration and supervision...

Biamp Vocia VO-4eEnhanced 4-Channel Networked Audio Output DeviceThe Vocia VO-4e is an enhanced output device that takes audio from the Vocia network and delivers it as analog line-level signals for local use. Its four outputs let integrators feed powered loudspeakers, third-party amplifiers, assistive-listening systems, recorders, or other downstream equipment from anywhere on the network.By converting networked audio back to analog at the point of need, the VO-4e extends a Vocia design...

Biamp Vocia VOIP-1-2VoIP Telephone Paging Interface (2 Lines)The Vocia VOIP-1-2 is a telephone paging interface that connects VoIP/SIP phone lines to a networked Vocia public-address and voice-evacuation system. It lets users originate live pages or trigger stored messages from an IP telephone, bringing paging control to any handset on the phone system.Configured for two VoIP lines, the VOIP-1-2 integrates modern IP telephony with distributed audio, so callers can dial in, select the zones or...

Biamp Vocia VOIP-1-4VoIP Telephone Paging Interface (4 Lines)The Vocia VOIP-1-4 is a telephone paging interface that links VoIP/SIP phone lines to a networked Vocia public-address and voice-evacuation system. It allows users to originate live pages or launch stored messages from an IP telephone, extending paging control to any handset on the phone network.With capacity for four VoIP lines, the VOIP-1-4 supports busier sites or multiple simultaneous paging origins while integrating modern IP...

Biamp Vocia VPSI-1Paging Station InterfaceThe Vocia VPSI-1 is a paging-station interface that lets third-party microphones, push-to-talk buttons, and LED indicators operate as a slave to Vocia stations and the VI-6 input device. It provides the connection points and control logic needed to build custom or purpose-designed paging origins that behave like standard Vocia stations.A balanced audio input with adjustable gain accepts an external microphone, while push-to-talk contacts start pages...

Biamp Vocia WR-1Vocia Wall Remote ControlThe Biamp Vocia WR-1 is a wall-mounted remote for the Vocia networked paging and public address platform. It gives staff a simple, fixed control point for common functions such as adjusting output levels or recalling preset actions in a defined space, without requiring access to the central system or a dedicated paging station.Installed in a standard wall location, the WR-1 fits neatly into meeting rooms, retail floors, and back-of-house areas where...

Biamp Vocia WS-1010-Button Wall-Mount Paging StationThe Vocia WS-10 is a wall-mount paging station that provides ten programmable selection buttons for originating announcements in a Vocia public-address and voice-evacuation system. Its built-in microphone and clear controls let staff select zones or message sequences and page quickly from a fixed location.Because the station connects to the Vocia network over standard structured cabling, it can be placed wherever paging is needed, such as...

Biamp Vocia WS-44-Button Wall-Mount Paging StationThe Vocia WS-4 is a wall-mount paging station with four programmable selection buttons for making announcements in a Vocia public-address and voice-evacuation system. Its integrated microphone and simple controls let users choose zones or message sequences and page from a fixed, convenient location.The station links to the Vocia network over standard structured cabling, so it can be installed wherever paging is required, including reception...

Biamp VOLTAGE CNTRL BOXVoltage Control Interface BoxThe Biamp Voltage Control Box is a control interface accessory that lets a Biamp digital signal processing system respond to analog control voltages. It converts external voltage signals into control data the processor can act on, allowing third-party controllers, potentiometers, and automation devices to adjust audio parameters such as level.Connected to a compatible Biamp processor, the Voltage Control Box bridges legacy or voltage-based...

Biamp Voltera A 300.22-Channel Compact Power AmplifierThe Biamp Voltera A 300.2 is a compact, two-channel power amplifier that delivers 300 watts of total output in a space-saving half-rack chassis. Each channel is switchable between high-impedance 70V/100V distributed lines and low-impedance loudspeaker loads, letting a single unit serve commercial background-music, paging, and foreground applications.Global power sharing lets the amplifier allocate its available wattage flexibly across both...

Biamp Voltera A 300.44-Channel Power AmplifierThe Biamp Voltera A 300.4 is a four-channel power amplifier that provides 300 watts of total output for commercial audio distribution. Every channel is switchable between high-impedance 70V/100V distributed lines and low-impedance loudspeaker loads, allowing one unit to cover multiple zones with a mix of connection types.Global power sharing lets the amplifier distribute its available wattage across the four channels as the installation requires,...

Biamp Voltera A 600.22-Channel Power AmplifierThe Biamp Voltera A 600.2 is a two-channel power amplifier that delivers 600 watts of total output for demanding commercial audio installations. Each channel is switchable between high-impedance 70V/100V distributed lines and low-impedance loudspeaker loads, so a single unit can power larger zones or higher-output loudspeakers as the design requires.Global power sharing allows the amplifier to allocate its available wattage flexibly across both...

Biamp Voltera A 600.4600 W 4-Channel Analog Installation Power AmplifierThe Biamp Voltera A 600.4 is a compact, install-grade power amplifier that delivers 600 watts across 4 independent channels, with each channel rated at roughly 150 W into 4-ohm, 8-ohm, 70V, or 100V loads. As part of the Voltera A analog line, it is a true plug-and-play device that needs no software to commission, making it a straightforward choice for background music and paced sound reinforcement in smaller rooms and...

Biamp Voltera D 1200.2M1200 W 2-Channel Networked Amplified Loudspeaker Controller with Onboard DSPThe Biamp Voltera D 1200.2M is a networked amplified loudspeaker controller that combines 1200 watts of amplification across 2 channels with integrated loudspeaker processing. Each channel is rated at approximately 600 W and can drive 4-ohm, 8-ohm, 70V, or 100V loads, letting a single unit serve mixed low-impedance and constant-voltage zones. This M variant adds a fully programmable onboard DSP...

Biamp Voltera D 1200.41200 W 4-Channel Networked Amplified Loudspeaker ControllerThe Biamp Voltera D 1200.4 is a networked amplified loudspeaker controller that combines 1200 watts of amplification across 4 channels with integrated loudspeaker processing. Each channel is rated at approximately 300 W and can drive 4-ohm, 8-ohm, 70V, or 100V loads, letting a single unit serve mixed low-impedance and constant-voltage zones.Media networking is built in, with AVB, Dante, and AES67 support for clean...

Biamp Voltera D 1200.4M1200 W 4-Channel Networked Amplified Loudspeaker Controller with Onboard DSPThe Biamp Voltera D 1200.4M is a networked amplified loudspeaker controller that combines 1200 watts of amplification across 4 channels with integrated loudspeaker processing. Each channel is rated at approximately 300 W and can drive 4-ohm, 8-ohm, 70V, or 100V loads, letting a single unit serve mixed low-impedance and constant-voltage zones. This M variant adds a fully programmable onboard DSP...

Biamp Voltera D 1200.81200 W 8-Channel Networked Amplified Loudspeaker ControllerThe Biamp Voltera D 1200.8 is a networked amplified loudspeaker controller that combines 1200 watts of amplification across 8 channels with integrated loudspeaker processing. Each channel is rated at approximately 150 W and can drive 4-ohm, 8-ohm, 70V, or 100V loads, letting a single unit serve mixed low-impedance and constant-voltage zones.Media networking is built in, with AVB, Dante, and AES67 support for clean...

Biamp Voltera D 2400.2M2400 W 2-Channel Networked Amplified Loudspeaker Controller with Onboard DSPThe Biamp Voltera D 2400.2M is a networked amplified loudspeaker controller that combines 2400 watts of amplification across 2 channels with integrated loudspeaker processing. Each channel is rated at approximately 1200 W and can drive 4-ohm, 8-ohm, 70V, or 100V loads, letting a single unit serve mixed low-impedance and constant-voltage zones. This M variant adds a fully programmable onboard DSP...

Biamp Voltera D 2400.42400 W 4-Channel Networked Amplified Loudspeaker ControllerThe Biamp Voltera D 2400.4 is a networked amplified loudspeaker controller that combines 2400 watts of amplification across 4 channels with integrated loudspeaker processing. Each channel is rated at approximately 600 W and can drive 4-ohm, 8-ohm, 70V, or 100V loads, letting a single unit serve mixed low-impedance and constant-voltage zones.Media networking is built in, with AVB, Dante, and AES67 support for clean...

Biamp Voltera D 2400.4M2400 W 4-Channel Networked Amplified Loudspeaker Controller with Onboard DSPThe Biamp Voltera D 2400.4M is a networked amplified loudspeaker controller that combines 2400 watts of amplification across 4 channels with integrated loudspeaker processing. Each channel is rated at approximately 600 W and can drive 4-ohm, 8-ohm, 70V, or 100V loads, letting a single unit serve mixed low-impedance and constant-voltage zones. This M variant adds a fully programmable onboard DSP...

Biamp Voltera D 2400.82400 W 8-Channel Networked Amplified Loudspeaker ControllerThe Biamp Voltera D 2400.8 is a networked amplified loudspeaker controller that combines 2400 watts of amplification across 8 channels with integrated loudspeaker processing. Each channel is rated at approximately 300 W and can drive 4-ohm, 8-ohm, 70V, or 100V loads, letting a single unit serve mixed low-impedance and constant-voltage zones.Media networking is built in, with AVB, Dante, and AES67 support for clean...

Biamp Voltera D 4800.2M4800 W 2-Channel Networked Amplified Loudspeaker Controller with Onboard DSPThe Biamp Voltera D 4800.2M is a networked amplified loudspeaker controller that combines 4800 watts of amplification across 2 channels with integrated loudspeaker processing. Each channel is rated at approximately 2400 W and can drive 4-ohm, 8-ohm, 70V, or 100V loads, letting a single unit serve mixed low-impedance and constant-voltage zones. This M variant adds a fully programmable onboard DSP...