Audio & Video

The QSC EB2082-i is an extension bar (rigging accessory) for the QSC Installed Line Array (ILA) system. It attaches to the array frame and allows a WL118-sw or WL115-sw subwoofer to be suspended directly behind a flown WL2082-i array, keeping low frequencies aligned with the mains without extra ground stacks. This is a hardware accessory, not a loudspeaker. This is the black finish version.Key FeaturesExtension bar for suspending a subwoofer behind an ILA arrayCompatible with WL118-sw and...

The QSC EB2082-i is an extension bar (rigging accessory) for the QSC Installed Line Array (ILA) system. It mounts to the array frame so a WL118-sw or WL115-sw subwoofer can be flown directly behind a suspended WL2082-i array, keeping the low end time-aligned with the mains. This is a hardware accessory, not a loudspeaker. This is the white finish version to match white ILA components.Key FeaturesExtension bar for suspending a subwoofer behind an ILA arrayCompatible with WL118-sw and WL115-sw...

The QSC FB2082-i is the fly-bar (array frame/rigging accessory) for the QSC Installed Line Array (ILA) system. It is the primary suspension point from which a column of WL2082-i elements, and compatible subwoofers, is hung, providing safe flying and precise array-angle control. This is a rigging accessory, not a loudspeaker. This is the black finish version.Key FeaturesFly-bar / array frame for suspending WL2082-i line arraysPrimary rigging point for the ILA systemSupports flown subwoofer...

The QSC FB2082-i is the fly-bar (array frame/rigging accessory) for the QSC Installed Line Array (ILA) system. It serves as the main suspension point for hanging a column of WL2082-i elements and compatible subwoofers, giving installers safe flying and accurate array-angle control. This is a rigging accessory, not a loudspeaker. This is the white finish version for white ILA installs.Key FeaturesFly-bar / array frame for suspending WL2082-i line arraysPrimary rigging point for the ILA...

The QSC GP118-sw is a high-output, direct-radiating 18-inch vented subwoofer from the QSC GP (ground-support) Series. Built for portable and installed WideLine systems, it can be ground-stacked or flown and pairs with full-range line arrays to add powerful, articulate low end. This is the black finish version.Key FeaturesSingle 18-inch transducer with 4-inch voice coil850 W continuous power handlingDirect-radiating vented enclosure design18 mm Baltic birch cabinet with 16-gauge steel...

The QSC GP212-sw is a dual 12-inch ground-support subwoofer from the QSC WideLine / GP Series. Using a 4th-order band-pass design, it delivers high-output low frequencies in a rugged, weather-resistant cabinet that ground-stacks with interlocking feet and provides an M20 pole mount for a full-range speaker on top. It suits portable and installed WideLine systems. This is the black finish version.Key FeaturesDual 12-inch woofers with 4-inch voice coils1100 W continuous power handling4th-order...

The QSC GP218-sw is a dual 18-inch high-output, direct-radiating vented subwoofer from the QSC GP (ground-support) Series. Delivering serious low-frequency energy for large-format WideLine systems, it can be ground-stacked or flown to reinforce full-range line arrays in touring and installed applications. This is the black finish version.Key FeaturesDual 18-inch transducers with 4-inch voice coils1700 W continuous power handlingDirect-radiating vented enclosure design18 mm Baltic birch cabinet...

The QSC GX3 is a straightforward, reliable 2-channel power amplifier aimed at musicians, DJs, and small live-sound systems. With power levels matched to popular loudspeakers and QSC's proven protection circuitry, it offers dependable performance and easy setup for bands, houses of worship, and portable PA rigs.Key Features2-channel power amplifier for portable and small-venue use300W per channel at 8 ohm, 425W per channel at 4 ohmPower levels matched to popular loudspeakersQSC protection...

The QSC GX5 is a 2-channel power amplifier offering more headroom than the GX3 for medium loudspeakers and busier live-sound systems. Designed for musicians, DJs, and portable PA, it delivers dependable QSC power with protection circuitry and power levels tailored to popular passive speakers.Key Features2-channel power amplifier for portable and live-sound use500W per channel at 8 ohm, 700W per channel at 4 ohmPower levels matched to popular loudspeakersQSC protection circuitry for reliable...

The QSC GX7 is the highest-power model in the GX 2-channel amplifier line, built for larger loudspeakers and more demanding portable and installed systems. It delivers strong, clean power with QSC's proven protection circuitry, making it a dependable choice for bands, DJs, houses of worship, and rental inventories.Key Features2-channel power amplifier for higher-output systems725W per channel at 8 ohm, 1000W per channel at 4 ohmPower levels matched to popular loudspeakersQSC protection...

The QSC GXD4 is a lightweight 2-channel power amplifier with onboard DSP, designed for portable live sound, DJs, and small installed systems. It pairs efficient Class-D power with intelligent limiting and speaker-tuning tools, so users can protect their loudspeakers and shape the sound without adding an external processor.Key Features2-channel Class-D amplifier, 400W/ch at 8 ohm and 600W/ch at 4 ohmOnboard DSP: high/low-pass filters, 4-band parametric EQIntelligent loudspeaker protection with...

The QSC GXD8 is a higher-power 2-channel Class-D amplifier with onboard DSP, built for portable live sound, DJs, and small-to-medium installations. It delivers substantial power in a lightweight chassis and includes speaker-tuning filters and intelligent limiting, giving users protection and processing without a separate DSP unit.Key Features2-channel Class-D amplifier, 800W/ch at 8 ohm and 1200W/ch at 4 ohmOnboard DSP: high/low-pass filters, 4-band parametric EQIntelligent loudspeaker...

The QSC Q-SYS I/O Frame is a networked audio input/output expansion chassis for the Q-SYS ecosystem. It is not a standalone processor; instead it houses interchangeable audio I/O cards and connects to a Q-SYS Core over the Q-LAN network, extending audio inputs and outputs to remote locations in a design. The single-rack-space frame accepts up to four of the available Q-SYS I/O cards (Mic/Line In, high-performance Mic/Line In, Line Out, DataPort, and AES3), supporting up to 16 analog channels...

The QSC I/O USB Bridge is an AV-to-USB bridging endpoint for the Q-SYS platform. It takes networked audio and video from a Q-SYS system and presents it to a laptop or room PC over a single standard USB connection, so participants can use their preferred soft codec (Zoom, Teams, Webex, and others) with the room's professional cameras, microphones, and speakers. It targets bring-your-own-device conference rooms and huddle spaces.Key FeaturesBridges Q-LAN audio and video to a computer over USB...

The QSC I/O-8 Flex is a networked analog I/O endpoint for the Q-SYS platform, used to add flexible input and output channels to a Q-SYS design at the point where they are needed. Rather than routing every source and destination back to the Core, integrators can place an I/O-8 Flex near microphones, sources or amplifiers and carry audio over the network. Its "Flex" analog channels can be configured individually as inputs or outputs, so a single model adapts to a wide range of room and rack...

The QSC ISA300Ti is a two-channel installation power amplifier with a built-in output transformer, giving it fully isolated 25V, 70V, and 100V distributed-line outputs in addition to low-impedance operation. The integrated transformer (the "Ti" designation) makes it purpose-built for constant-voltage systems in large commercial spaces, paging and background-music installations, and venues with long loudspeaker runs. It delivers 185 watts per channel into 8 ohms, 280 watts into 4 ohms, or 300...

The QSC ISA750 is a rugged two-channel installation power amplifier from the ISA Series, engineered for demanding fixed-install and contractor applications. It drives conventional low-impedance loudspeaker loads with generous headroom, making it a strong choice for houses of worship, auditoriums, stadiums, and other high-output installed systems. Rated at 450 watts per channel into 8 ohms and 650 watts into 4 ohms, it can be bridged to mono for even greater output. The ISA750 features detented...

The QSC IT-42 is a dual-output isolation transformer module accessory, not a standalone amplifier. It is designed to be installed in a compatible QSC CX-series amplifier (such as the CX302) to add fully isolated 70V/100V distributed-line outputs to what is otherwise a low-impedance amplifier. This lets integrators use a single amplifier for constant-voltage loudspeaker systems in commercial and installed applications such as paging, background music, and 70V zone systems. Because the IT-42 is...

The QSC K.2 LOC is a lock-out cover accessory designed for the QSC K.2 Series powered loudspeakers (K8.2, K10.2 and K12.2). It fits over the rear control panel to physically block access to the DSP menu, volume, gain and channel controls, protecting your dialed-in settings in installed or high-traffic environments where the speaker should not be adjusted by others. It is intended for AV integrators, houses of worship, venues and rental operators who want to prevent accidental or unauthorized...

The QSC K10 Outdoor Cover is a temporary weather-resistant cover that shields a QSC K10 or K10.2 powered loudspeaker from rain, dust, and sun during outdoor events and short-term installations. It fits over the cabinet while the speaker stays in position, protecting the electronics and finish between uses. This is a protective accessory, not a loudspeaker.Key FeaturesWeather-resistant cover for temporary outdoor protectionCustom fit for the QSC K10 and K10.2 loudspeakersGuards against rain,...

The QSC K10 Tote is a soft, padded carry bag designed for the QSC K10 and K10.2 powered loudspeakers. It is a transport and protection accessory, not a speaker. The tote wraps the cabinet in cushioned material to guard against scuffs, dust, and impacts during transport and storage, with access openings and a carry handle for convenient movement between events. It keeps a K10-series loudspeaker protected on the road.Key FeaturesPadded carry tote for the QSC K10 / K10.2Protects the cabinet...

The QSC K10.2 is an active two-way loudspeaker in the K.2 Series, pairing a 10-inch woofer and 1.4-inch compression driver with a 2,000-watt Class-D power module. It is a versatile portable PA workhorse for live music, DJs, houses of worship and rental fleets, equally at home as a main, floor monitor or fill speaker.Key Features10-inch woofer with 1.4-inch diaphragm HF compression driver2,000-watt peak Class-D power module for high headroomUp to 129 dB maximum SPL90-degree conical coverage...

The QSC K10.2 Yoke is a U-shaped mounting bracket made for permanently installing the QSC K10.2 powered loudspeaker. It secures to the cabinet's factory mounting points and allows integrators to aim the speaker on walls, ceilings, or overhead rigging with adjustable pan and tilt. It is well suited to houses of worship, retail, restaurants, and other fixed installations. This is a mounting accessory, not a loudspeaker.Key FeaturesDedicated yoke mount engineered for the K10.2 loudspeakerWall,...

The QSC K12 Outdoor Cover is a temporary weather-resistant cover that protects a QSC K12 or K12.2 powered loudspeaker from rain, dust, and sun during outdoor use and short-term installations. It slips over the cabinet while the speaker remains in place, helping guard the electronics and finish from the elements between performances. This is a protective accessory, not a loudspeaker.Key FeaturesWeather-resistant cover for temporary outdoor protectionCustom fit for the QSC K12 and K12.2...