Audio & Video

The QSC CX-Qn 4K4 is a four-channel network amplifier built for the Q-SYS ecosystem, and the "n" designation adds native Dante audio transport alongside Q-LAN. It is aimed at systems integrators building networked audio for venues such as houses of worship, corporate campuses, retail, hospitality and performing-arts spaces where amplifiers must be managed as part of a larger Q-SYS design.Key FeaturesFour independent output channels with up to 1000 W per channelFlexible Lo-Z, 70V and...

The QSC CX108V is an eight-channel professional power amplifier designed specifically for 70-volt distributed audio systems. It is ideal for large commercial installations such as retail spaces, schools, hotels, restaurants, and paging or background-music systems where many loudspeakers run over long cable runs at high line voltage. Each of the eight channels delivers 100 watts directly into a 70V line, and channel pairs can be bridged for higher power where needed. Built on QSC's PowerLight...

The QSC CX168 is an eight-channel low-impedance professional power amplifier for multi-zone commercial and installed sound systems. It is well suited to venues that need many independent channels of conventional 8- or 4-ohm loudspeaker drive, such as multi-room facilities, houses of worship, bars, and AV installations. Each channel delivers 90 watts into 8 ohms or 130 watts into 4 ohms, and pairs can be bridged for higher output. QSC's PowerLight switch-mode supply keeps this eight-channel...

The QSC CX502 is a compact two-channel professional power amplifier built for fixed installation and light touring where dependable low-impedance performance is required. It suits background/foreground music systems, meeting spaces, houses of worship, and small clubs, driving conventional 8-, 4-, or 2-ohm loudspeakers with headroom to spare. QSC's PowerLight switch-mode supply keeps the chassis light and cool while delivering tight, consistent output, and an onboard DataPort connector allows...

The QSC CXD4.2 is a 4-channel processing (DSP) amplifier for installed sound systems that need flexible power and onboard signal processing in a compact 2RU package. Its four independent channels can be bridged or paralleled to match a wide range of loads, and each channel includes crossover, EQ, delay and dynamics processing so a single unit can drive a complete loudspeaker system.Key FeaturesFour independent, flexible-power channels (up to 2500W total)Onboard DSP: crossovers, parametric EQ,...

The QSC CXD4.2Q is a 4-channel network processing amplifier and a true Q-SYS peripheral, bringing CXD-series power and DSP into a networked, centrally managed system over standard Gigabit Ethernet. It provides four flexible channels with onboard processing, plus rear-panel mic/line inputs, so integrators can deploy and monitor amplification as part of a Q-SYS ecosystem.Key FeaturesFour flexible-power channels with onboard DSPNative Q-SYS integration over Q-LAN (Gigabit Ethernet)Local mic/line...

The QSC CXD4.3 is a four-channel processing amplifier from the CXD Series, combining high-density amplification with full loudspeaker DSP in a 2RU chassis. It targets installed sound applications, such as retail, restaurants, worship and mid-size venues, where an integrator wants one box to power multiple zones with both low-impedance and 70V/100V loudspeaker lines.Key FeaturesFour independent channels with Flexible Amplifier Summing Technology (FAST) to distribute power across one to four...

The QSC CXD4.3Q is a higher-power 4-channel network processing amplifier and true Q-SYS peripheral. It combines flexible-power amplification, comprehensive onboard DSP, and native Q-SYS networking, and can drive 70V or 100V distributed loudspeaker lines directly from any output without external transformers, making it a versatile engine for installed sound.Key FeaturesFour flexible-power channels, 900W per channel at 8 ohm (peak)Direct 70V/100V line drive on any output, no transformers...

The QSC CXD4.5 is the top-tier four-channel processing amplifier in the CXD Series, packing high-density amplification and full loudspeaker DSP into a 2RU chassis. It is aimed at larger installed sound systems, such as auditoriums, houses of worship, sports and entertainment venues, that require substantial power across multiple zones with both low-impedance and 70V/100V distribution.Key FeaturesFour independent channels with Flexible Amplifier Summing Technology (FAST) that reallocates total...

The QSC CXD4.5Q is the flagship four-channel network processing amplifier in the CXD-Q Series, purpose-built to plug directly into a Q-SYS ecosystem over a Q-LAN Ethernet network. It is aimed at systems integrators handling demanding installed AV projects such as houses of worship, stadiums, theaters and large retail, where a single rack unit must feed several loudspeaker zones with onboard DSP and network audio in one box.Key FeaturesFour independent channels with Flexible Amplifier Summing...

The QSC CXD8.4Q is an 8-channel network processing amplifier and true Q-SYS peripheral built for high-channel-count installed systems. It provides eight flexible-power channels with onboard DSP, direct 70V/100V line drive, and eight rear-panel mic/line inputs, so a single unit can power and process many loudspeaker zones under central Q-SYS control.Key FeaturesEight flexible-power channels, 500W per channel at 8 ohmDirect 70V/100V line drive without external transformersNative Q-SYS...

The QSC CXD8.4Qn is the network-input version of the 8-channel CXD-Q amplifier and a true Q-SYS peripheral. It offers the same eight flexible-power channels, onboard DSP and direct 70V/100V line drive as the CXD8.4Q, while omitting local analog inputs to simplify design and reduce cost in systems where all audio is delivered over the Q-SYS network.Key FeaturesEight flexible-power channels, 500W per channel at 8 ohmNetwork-input only (no local analog inputs)Direct 70V/100V line drive without...

The QSC CXD8.8Q is an 8-channel network processing amplifier and true Q-SYS peripheral for large installed systems that need high channel counts and high power in one chassis. It offers eight flexible-power channels with onboard DSP, direct 70V/100V line drive, and eight rear-panel mic/line inputs, all managed centrally over a Q-SYS network.Key FeaturesEight flexible-power channels, 850W per channel at 8 ohmDirect 70V/100V line drive without external transformersNative Q-SYS integration over...

The QSC CXD8.8Qn is a network-input version of the high-power 8-channel CXD-Q amplifier, a true Q-SYS peripheral. It delivers the same eight flexible-power channels, onboard DSP and direct 70V/100V line drive as the CXD8.8Q, but omits the local analog inputs to simplify system design and reduce cost where all audio arrives over the Q-SYS network.Key FeaturesEight flexible-power channels, 850W per channel at 8 ohmNetwork-input only (no local analog inputs) for streamlined Q-SYS designsDirect...

The Synapse D16Mio (Attero Tech by QSC) is a rack-mount networked audio interface that bridges analog and AES3 audio to a Dante / AES67 network. Aimed at commercial AV integrators, it brings up to 16 channels of I/O onto the audio network for distribution to processors, amplifiers and other networked endpoints. Note: QSC lists this product as discontinued.Key Features16 channels of networked audio I/O over Dante / AES67Bridges balanced analog and digital audio to the networkStandard 1RU...

The Axon D2i (Attero Tech by QSC) is a compact networked audio interface that puts two channels of analog audio onto a Dante / AES67 network. Designed for commercial installations, it provides a small, easily concealed endpoint for adding local inputs or outputs to a networked audio system such as Q-SYS. This is a network interface device, not a loudspeaker or amplifier.Key Features2-channel Dante / AES67 networked audio interfaceCompact enclosure for discreet installationBridges balanced...

The QSC Synapse D32Mi (Attero Tech) is a high-performance, high-channel-density networked audio interface offering 32 studio-grade mic/line preamps in a single rack space. It brings large microphone counts onto a Dante network with AES67 interoperability, making it suited to ballrooms, houses of worship and multi-mic conferencing rooms feeding a Q-SYS system.Key Features32 studio-grade mic/line preamp inputsSoftware-selectable pad for professional or consumer levelsFront-panel headphone...

The Attero Tech by QSC Synapse D32o is a high-density networked audio output interface that turns Dante/AES67 network audio into 32 channels of balanced, line-level analog output in a single rack space. It is built for large-scale installations - stadiums, arenas, houses of worship, conference centers, broadcast plants and recording studios - where many discrete analog feeds must be broken out from an audio network. Outputs are available on either terminal-block or DB-25 connectors, while dual...

The QSC DAB-801 is a DataPort Amplifier Backup panel for Q-SYS and QSC DataPort amplifier systems, engineered for life-safety, evacuation and other mission-critical installations that cannot tolerate a single amplifier failure. It provides N+1 amplifier redundancy with automatic failover between primary amplifiers and a shared backup, plus emergency-paging functionality. It is an infrastructure/backup panel rather than an amplifier or standalone processor.Key FeaturesN+1 amplifier redundancy...

The QSC DCA1222 is a two-channel Digital Cinema Amplifier built for movie theater and screen-channel applications. Part of QSC's DCA series, it pairs efficient PowerLight switching power supply technology with a clean, high-headroom output stage to drive cinema surround and stereo channels reliably in a compact 2RU chassis.Key Features2-channel amplifier for cinema playback systems215 W per channel at 8 ohms, 375 W at 4 ohms, 600 W at 2 ohms (1 kHz)Class AB output stage for accurate...

The QSC DCA1622 is a two-channel Digital Cinema Amplifier designed for professional movie theater sound systems. As part of QSC's DCA family, it combines PowerLight switching power supply technology with a robust Class AB output stage to deliver clean, dependable power to cinema screen and surround channels in a space-saving 2RU package.Key Features2-channel amplifier for cinema playback350 W per channel at 8 ohms, 600 W at 4 ohms, 800 W at 2 ohms (1 kHz)Class AB output stage for...

The QSC DCA1644 is a four-channel Digital Cinema Amplifier for movie theater surround and screen-channel duty. Part of the DCA series, it delivers four independent channels of clean power in a single 2RU chassis, using QSC's PowerLight switching supply for efficiency and reduced weight in the amplifier rack.Key Features4-channel amplifier for cinema systems250 W per channel at 8 ohms, 400 W per channel at 4 ohmsClass AB+B output topologyPowerLight switching power supply2RU rack-mount chassis,...

The QSC DCA1824 is a four-channel Digital Cinema Amplifier engineered for movie theater sound systems. It provides four independent channels of amplification in a compact 2RU chassis and uses QSC's PowerLight switching power supply to keep the unit light and efficient while remaining stable into low-impedance loads.Key Features4-channel amplifier for cinema playback170 W per channel at 8 ohms, 250 W at 4 ohms, 450 W at 2 ohmsClass AB+B output topologyPowerLight switching power supply2RU...

The QSC DCA2422 is a two-channel Digital Cinema Amplifier built for higher-power screen and surround channels in professional cinemas. It employs QSC's 2-tier Class H output topology for greater efficiency at high output, combined with a PowerLight switching supply, all housed in a compact 2RU chassis.Key Features2-channel amplifier for cinema systems475 W per channel at 8 ohms, 825 W at 4 ohms, 1200 W at 2 ohms (1 kHz)Efficient 2-tier Class H output stagePowerLight switching power supply2RU...