Audio & Video

Contractor power amplifier/ 2 channel, 300 watts/ch at 8Ω, 500 watts/ch at 4Ω, 70V/mono at 1200 Watts

Contractor power amplifier/ 2 channel, 500 watts/ch at 8Ω, 800 watts/ch at 4Ω, 70V/mono at 2000 Watts

The QSC CODP4 is a DataPort output card for Q-SYS systems, providing a direct digital audio and control link to compatible QSC amplifiers. It carries four channels of audio over two HD15 DataPort connectors and supports the v1 DataPort specification, allowing Q-SYS to interface with QSC CX, DCA, PowerLight, PL2, and PL3 amplifier series. Beyond audio, the card enables amplifier standby and muting to be controlled from within Q-SYS Designer software, and supports amplifier monitoring in...

The QSC COL4 is a four-channel analog line output card for Q-SYS Core processors and I/O Frames. It adds four balanced line-level analog outputs to a Q-SYS system, allowing processed audio to be sent to amplifiers, powered loudspeakers, assistive-listening feeds, recorders, or other line-level destinations. Output trim is software-adjustable within Q-SYS Designer, and the card provides greater than 112 dB dynamic range with very low distortion for clean, high-quality output. As a Q-SYS...

The QSC Core 8 Flex is a compact Q-SYS processor that brings audio, video and control together on one network-based platform for meeting rooms, classrooms and small-to-mid installs. It handles 64x64 networked audio channels over Q-LAN/AES67 and includes onboard Flex analog I/O plus GPIO, so integrators can mix networked and physical connections. Built-in acoustic echo cancellation, VoIP, USB AV bridging and the full Q-SYS Control engine make it a flexible core for conferencing and automation,...

The QSC CP12 is a compact, lightweight 12-inch two-way powered loudspeaker for portable PA, small-to-medium venues, corporate AV, houses of worship, and floor-monitor use. A 1000 watt Class-D amplifier drives a 12-inch woofer and a 1.4-inch compression driver, delivering higher output and lower reach than the smaller CP8 while staying easy to transport. One-touch DSP contours simplify voicing for common applications, and the angled cabinet lets the speaker double as a stage monitor.Key...

The QSC CP12 Outdoor Cover is a weather-resistant protective cover made for the QSC CP12 compact powered loudspeaker when it is installed or used outdoors. It is a protection accessory, not a speaker. The cover fits over the CP12 cabinet to shield it from rain, sun, dust, and debris during outdoor events or in semi-permanent outdoor placements, helping extend the life of the loudspeaker between uses.Key FeaturesWeather-resistant cover for the QSC CP12Shields against rain, sun, dust, and...

The QSC CP12 Tote is a padded, soft-sided carry bag made specifically for the QSC CP12 compact powered loudspeaker. It is a transport and protection accessory, not a speaker. The tote wraps the larger CP12 cabinet in cushioned padding to protect it from scuffs, dust, and knocks during transport and storage, with a carry handle for convenient movement between gigs and installations.Key FeaturesCustom-fit padded tote for the QSC CP12Protects the cabinet during transport and storageSoft,...

The QSC CP12YM is a dedicated steel yoke mount for the QSC CP12 compact powered loudspeaker. It lets integrators fly or surface-mount the CP12 on walls, ceilings or trussing while allowing the cabinet to be aimed both horizontally and vertically for precise coverage. This is a mounting accessory only; the CP12 loudspeaker is sold separately.Key FeaturesModel-specific yoke bracket engineered for the QSC CP12Powder-coated steel construction for durabilityAdjustable pan and tilt for accurate...

The QSC CP12YM-BK is a black steel yoke mount kit for the QSC CP12 compact powered loudspeaker. It is a mounting accessory, not a speaker. The U-shaped yoke bracket cradles the CP12 cabinet and allows it to be fixed to a wall, ceiling, or overhead structure with adjustable tilt so the speaker can be aimed at the listening area. It offers a permanent or semi-permanent alternative to pole or tripod mounting.Key FeaturesSteel yoke mount for the QSC CP12Wall, ceiling, or overhead...

The QSC CP8 is a compact, lightweight 8-inch two-way powered loudspeaker built for portable PA, small venues, corporate AV, houses of worship, and as a stage monitor. Its 1000 watt Class-D amplifier drives an 8-inch woofer and a 1.4-inch compression driver for clear, full sound in a cabinet that is easy to carry and quick to set up. A simple one-touch DSP control offers preset voicing contours for common uses, and the enclosure doubles as a floor monitor thanks to its angled wedge...

The QSC CP8 Outdoor Cover is a weather-resistant protective cover made for the QSC CP8 compact powered loudspeaker when it is installed or used outdoors. It is a protection accessory, not a speaker. The cover fits over the CP8 cabinet to shield it from rain, sun, dust, and debris during outdoor events or in semi-permanent outdoor placements, helping extend the life of the loudspeaker between uses.Key FeaturesWeather-resistant cover for the QSC CP8Shields against rain, sun, dust, and...

The QSC CP8 Tote is a padded, soft-sided carry bag made specifically for the QSC CP8 compact powered loudspeaker. It is a transport and protection accessory, not a speaker. The tote wraps the cabinet in cushioned padding to guard against scuffs, dust, and knocks during transport and storage, while cutouts and access points let you handle the speaker conveniently. A carry handle makes it easy to move the CP8 between gigs and installs.Key FeaturesCustom-fit padded tote for the QSC CP8Protects...

The QSC CP8YM is a dedicated steel yoke mount for the QSC CP8 compact powered loudspeaker. It allows the CP8 to be permanently installed on a wall, ceiling or trussing and aimed precisely through horizontal and vertical adjustment. This is a mounting accessory only; the CP8 loudspeaker is not included.Key FeaturesModel-specific yoke bracket for the QSC CP8Powder-coated steel for long-term durabilityPan and tilt adjustment for accurate coverageSupports wall, ceiling and truss mountingUses the...

The QSC CP8YM-BK is a black steel yoke mount kit for the QSC CP8 compact powered loudspeaker. It is a mounting accessory, not a speaker. The U-shaped yoke bracket cradles the CP8 cabinet and lets you fix it to a wall, ceiling, or overhead structure while adjusting tilt so the speaker can be aimed at the audience. It provides a permanent or semi-permanent alternative to pole or tripod mounting.Key FeaturesSteel yoke mount for the QSC CP8Wall, ceiling, or overhead installationAdjustable tilt for...

The QSC CTEL4 is an analog telephony (POTS) input/output card for the Q-SYS platform. It lets integrators bring standard analog phone lines directly into a Q-SYS Core processor or I/O Frame, eliminating the need for a separate third-party analog telephone gateway. It is aimed at AV and telecom integrators building paging, intercom, help-point, and legacy telephony integrations on Q-SYS.Key FeaturesFour-line analog telephony interface using RJ-11 connectionsNative POTS integration into the...

The QSC CVR212-2 is a padded soft transport cover made to protect a QSC dual 12-inch WideLine subwoofer (the 212-sw enclosure) during transport and storage. It shields the cabinet finish, grille, and connectors from scuffs, dust, and moisture between gigs. This is a protective accessory, not a loudspeaker.Key FeaturesPadded soft cover for a dual 12-inch WideLine subwooferProtects finish, grille, and connectors in transitSnug, cabinet-specific fitDurable outer material for repeated road...

The QSC CVR3082-4 is a transport cover sized to protect a group of four QSC WL3082 WideLine-8 line array elements stacked on the CP3082-CT caster pallet. It keeps the boxes together and shields their finish, grilles, and rigging hardware from dust and scuffs while rolling and in storage. This is a protective accessory, not a loudspeaker.Key FeaturesCover for four (4) WL3082 line array elementsDesigned for use with the CP3082-CT caster palletProtects finish, grilles, and rigging in...

The QSC CX-Q 2K4 is a four-channel network power amplifier for the Q-SYS Ecosystem, suited to small and mid-size multi-zone installs in retail, restaurants, offices and worship spaces. Its four independent channels drive low-impedance loads or 70V/100V constant-voltage lines, with flexible power distribution and up to 2000 W total output. Native Q-LAN networking carries audio, control and monitoring, and four mic/line inputs provide additional analog on-ramps into the Q-SYS platform.Key...

The QSC CX-Q 4K4 is a four-channel network power amplifier for the Q-SYS Ecosystem, aimed at installs that need higher per-channel power across four zones, such as larger worship spaces, ballrooms and performance venues. Each channel is independent and can drive low-impedance loads or 70V/100V constant-voltage lines, delivering up to 1000 W per channel and up to 4000 W total. Native Q-LAN networking handles audio transport, control and monitoring within the Q-SYS platform.Key FeaturesFour...

The QSC CX-Q 4K8 is an eight-channel network power amplifier for the Q-SYS Ecosystem, built for integrators deploying multi-zone commercial audio in venues, houses of worship, hospitality and corporate spaces. Each of its eight channels operates independently and can drive low-impedance loads (8/4/2 ohm) or 70V/100V constant-voltage lines, with flexible power distribution across channels and up to 4000 W total output. Native Q-LAN networking provides audio transport, control and monitoring,...

The QSC CX-Q 8K4 is a four-channel network amplifier for the Q-SYS ecosystem, positioned near the top of the CX-Q range with 8000 W of total output across its four channels. It suits large installed-sound applications—auditoriums, arenas, houses of worship, stadiums and multi-zone commercial spaces—where high headroom and centralized Q-SYS management are required.Key FeaturesFour independent channels delivering 8000 W total system powerLo-Z, 70V and 100V direct-drive output...

The QSC CX-Q 8K8 is an eight-channel network amplifier built for the Q-SYS ecosystem, aimed at commercial and installed audio systems that need flexible, high-density amplification managed over the network. It connects natively via Q-LAN and drives loudspeakers in low-impedance, 70V or 100V modes with direct-drive constant-voltage outputs, so no output transformers are needed. QSC's FlexAmp power-sharing lets the total power be distributed across channels to match each zone's needs, and the...

The QSC CX-Qn 2K4 is a four-channel network power amplifier for the Q-SYS Ecosystem. It shares the CX-Q 2K4's four independent channels, flexible power distribution up to 2000 W total, and support for low-impedance, 70V and 100V loads, but the 'Qn' designation means it is network-input only: it omits the analog mic/line inputs found on the 'Q' models to lower system cost. Audio, control and monitoring all travel over Q-LAN, making it a streamlined choice for designs where all sources arrive...