Audio & Video

This is a factory replacement power cord, designated Power Cable III by Sonos, for the Connect, Connect:Amp, and Play:5 (Gen 1). It is the correct part to order when the original cable has been damaged, lost during a move, or needs to be replaced with a matching black cord in a rack that is finished in black.On legacy Sonos hardware, sticking with the manufacturer's cable is worth doing. The connector geometry and conductor gauge are specified for the device, the plug seats firmly enough that...

A factory replacement power cord, designated Power Cable II by Sonos, covering the Playbar, Play:3, Sub (Gen 1), and Sub (Gen 2). This is the part to order when a cable has been damaged, was left behind after a move, or needs replacing with a white cord to match a white component or a light-colored wall run.These are all discontinued Sonos products, which is exactly why a genuine cable is worth sourcing rather than a generic substitute. The connector and conductor gauge are specified for the...

The black version of the cord Sonos designates Power Cable II, serving the Playbar, Play:3, Sub (Gen 1), and Sub (Gen 2). Order it as a straight replacement for a damaged or missing original, or when a black cable is the one that disappears against dark media furniture, a black Sub, or a rack installation.All of the products this cable serves are discontinued, which is the practical argument for buying the genuine article. The connector geometry and conductor gauge are matched to the device,...

The Sonos Power Cable I is the factory AC cable used across a large part of the Sonos lineup, and this 6 ft (2 m) white version is the standard length most of those products ship with. Buy it as a straight replacement for a lost or damaged cord, as a spare for a system you are re-installing, or as a way to standardize cable color when a white speaker ends up sitting on an open shelf.Sonos lists this cable as compatible with Arc Ultra, Arc, Amp, Beam, Ray, Five, Sub 4, Sub (Gen 3), Sub Mini,...

This is the black version of the Sonos Power Cable I in the standard 6 ft (2 m) length. It is the same AC cord Sonos supplies with its black products, so it disappears against a black soundbar, Sub or Amp instead of drawing the eye the way a white cable does in a dark media room.Sonos lists the cable as compatible with Arc Ultra, Arc, Amp, Beam, Ray, Five, Sub 4, Sub (Gen 3), Sub Mini, Playbase and Play:5 (Gen 2). That makes it a practical stock item for integrators: one part number covers...

When the nearest outlet is not where the speaker needs to be, the long version of the Sonos Power Cable I solves it without an extension cord. At 11.5 ft (3.5 m) it roughly doubles the reach of the standard cable, which matters for a Sub placed away from the wall, a Five on a far shelf, or an Arc on a TV wall with the only receptacle behind the furniture.This is Sonos's own cable rather than a generic cord, so the connector, jacket diameter and white finish match the speaker it plugs into....

The long Sonos Power Cable I gives a Sonos component 11.5 ft (3.5 m) of reach, and this is the black version for rooms where a white cord would stand out. It is the straightforward fix for a Sub placed mid-room, an Amp mounted in a closet away from the receptacle, or an Arc on a TV wall with power in an inconvenient spot.Sonos publishes compatibility for Arc Ultra, Arc, Amp, Beam, Ray, Five, Sub 4, Sub (Gen 3), Sub Mini, Playbase and Play:5 (Gen 2), so integrators can carry a single long-cable...

The short Sonos Power Cable I exists for one reason: to get rid of the loop of excess cord that ends up coiled behind a media cabinet or stuffed into a rack. At 19.7 in (0.5 m) it is long enough to reach a nearby receptacle or a rack power strip and short enough that nothing has to be bundled and hidden.That makes it the cable of choice for an Amp sitting in an equipment rack, a Beam or Ray on a shelf directly above an outlet, or a Sub tucked beside furniture with power close by. Sonos lists...

This is the short, black Sonos Power Cable I - 19.7 in (0.5 m) of cord for situations where the standard cable leaves a loop that has to be hidden. In an equipment rack, a black cable of the right length is the difference between a clean rear panel and a bundle of coiled slack, and it is the natural companion to a rack-mounted Sonos Amp or Amp Multi feeding a power distribution strip.It is also useful outside the rack: a Beam or Ray on a shelf just above a receptacle, or a Sub Mini in a corner...

The Sonos Angled Power Cable is the factory cord for Sonos One, One SL and Play:1, and its right-angle connector is the point of the design: it exits sideways at the speaker rather than straight out, so the speaker can sit closer to a wall, in a bookshelf, or on a narrow bracket without the cable forcing it forward.This is the 6 ft (2 m) standard length in white, matching white Sonos One and One SL cabinets. Use it as a straight replacement for a lost or damaged cable, as a spare when moving...

Black version of the Sonos Angled Power Cable in the standard 6 ft (2 m) length, made for Sonos One, One SL and Play:1. The right-angle connector at the speaker end is what sets it apart from a generic cord - it turns the cable sideways immediately, so a speaker on a wall bracket, in a bookcase or behind a TV does not have to be pushed forward to clear the plug.Black is the finish to specify alongside black One and One SL cabinets, and it is the less conspicuous choice in a dark room or on a...

This is the factory replacement power supply for the Sonos Port, the network streaming component that brings Sonos into an existing amplifier, receiver or distributed audio system. If the original adapter has been lost during a rack move, damaged, or left behind with a previous install, this is the part that returns the Port to service - no third-party substitution, no guessing at polarity or output.Sonos specifies an auto-switching 100-240 V, 50-60 Hz universal input, so the adapter tolerates...

Sonos Play sits between the pocketable Roam and the larger Move 2: small enough to carry one-handed at 2.87 pounds, but built with a three-amplifier stereo array rather than a single full-range driver. Two angled tweeters create left-right separation and a dedicated midwoofer handles mids and bass, so it holds up as a proper room speaker indoors instead of only working as a travel speaker.It is rated IP67 — fully dustproof and able to survive immersion in one meter of water for 30...

Sonos Play sits between the pocketable Roam and the larger Move 2: small enough to carry one-handed at 2.87 pounds, but built with a three-amplifier stereo array rather than a single full-range driver. Two angled tweeters create left-right separation and a dedicated midwoofer handles mids and bass, so it holds up as a proper room speaker indoors instead of only working as a travel speaker.It is rated IP67 — fully dustproof and able to survive immersion in one meter of water for 30...

Ray is the entry point to Sonos home theater and the smallest soundbar in the range at 21.93 inches wide and 2.76 inches tall — short enough to sit inside most TV cabinets and console shelves without blocking the screen or the IR sensor. Four class-D amplifiers drive two tweeters and two high-efficiency midwoofers, and a proprietary bass reflex system with low-velocity ports lets it produce usable low end without port noise, which matters when a soundbar is placed in an enclosed...

Ray is the smallest bar in the Sonos home theater range, sized for bedrooms, apartments, offices, dorms, and any room where a full-width soundbar would dominate the furniture. At just under 22 inches, it slides onto a console or credenza in front of most TVs without blocking the screen, and its forward-facing driver array is deliberately tuned for enclosed spaces where reflected sound would otherwise muddy dialogue.Two tweeters and two high-efficiency midwoofers are driven by four Class-D...

The Medium Rectangle Flex Bracket is a Sonance new-construction mounting bracket, sold through the Sonos Architectural by Sonance line. It is not a speaker: it is the ABS frame you fasten to the studs during rough-in so that the drywall crew can cut to a known opening and the installer can drop the speaker in later without hunting for the right cutout position.Sonance specifies it for 6 in rectangle VX and VXQ models as well as legacy VP rectangle speakers - the same medium rectangle format...

A retrofit enclosure is the answer to the two problems open-back in-wall speakers create: sound spilling into the next room, and a wall cavity whose volume and construction vary from bay to bay. This Sonance rectangle enclosure, supplied as a pair and sold through the Sonos Architectural by Sonance line, gives each speaker a sealed, consistent back volume instead of whatever happens to be behind the drywall.Sonance builds it from glass-reinforced polypropylene and rates it at approximately 20...

The Sonos Roam Wireless Charger is a magnetic charging base built specifically for the Roam family. Magnets in the pad line up with the base of the speaker so it attaches by itself when set down - no cable to plug in, no connector to find in the dark, and the speaker can sit either upright or on its side while charging.This is the Lunar White finish, intended to pair with white Roam speakers. Sonos lists compatibility with Roam, Roam SL and Roam 2, and supplies a 10W USB power adapter in the...

Charging a portable speaker should not require finding a cable. The Sonos Roam Wireless Charger is a magnetic base that the speaker snaps onto on contact - set the Roam down and it starts charging, in either the upright or the horizontal orientation. This is the Shadow Black finish, the color Sonos currently offers, matching black Roam and Roam 2 speakers.Sonos lists compatibility with Roam, Roam SL and Roam 2, and includes a 10W USB power adapter in the box with a 3.9 ft (1.2 m) cable. Input...

The Sonance Medium Round Flex Bracket is a rough-in mounting accessory for the Sonos Architectural in-ceiling line, designed to be fastened between joists before drywall goes up. It fixes the speaker location early in the build, so the finished cutout lands exactly where the plan calls for it instead of wherever the framing happens to allow.Snap-on mesh wings extend to bridge joist bays up to 24 inches wide, and the bracket accepts Roto-Lock clamps used by 6-inch round Sonance models including...

The Sonance Round Retrofit Enclosure gives an in-ceiling speaker a sealed back box in rooms where the ceiling is already finished. It installs through the existing speaker cutout, so there is no need to open the ceiling or work from above, which makes it practical for remodels, condos and second-story rooms.Acoustically, the enclosure does two jobs. It reduces sound leaking into the room, hallway or bedroom on the other side of the ceiling by up to 20 dB, and it gives every speaker in the run...

Roam 2 is the speaker you take out of the house. At under a pound and roughly 6.6 inches tall, it fits a backpack pocket or a cupholder, and an IP67 rating means it survives dust, rain, poolside splashes, and full submersion in about three feet of water for up to 30 minutes. The rounded triangular body sits upright on a nightstand or lies flat on a table, and the drop-resistant housing is built for gear bags rather than shelves.Inside, a dedicated tweeter and a custom racetrack midwoofer are...

Roam 2 in black is the Sonos speaker built to leave the house. It weighs under a pound, stands 6.6 inches tall, and carries an IP67 rating, so dust, rain, poolside splashes, and brief submersion in about three feet of water are non-events. The drop-resistant housing stands upright on a shelf or lies flat on a table, and the matte black finish hides the scuffs that portable gear inevitably collects.A dedicated tweeter and a custom midwoofer are driven by two Class-H digital amplifiers, an...