Audio & Video

The QSC LF-4215-8F is a low-frequency loudspeaker component from QSC's DCS (Digital Cinema Speakers) line, used in professional cinema and screen-channel/surround systems. It is a 15-inch low-frequency transducer supplied as a component/replacement part rather than a finished consumer speaker, intended for cinema integrators and service technicians maintaining or building QSC cinema loudspeaker systems. The 8F designation identifies the specific driver variant referenced in QSC's LF-4215-(8)F...

The QSC LS-KIT-J is a jumper cable kit for QSC L Class LS-series powered subwoofers (such as the LS118), letting integrators daisy-chain AC power and signal between adjacent cabinets in a ground-stacked or arrayed subwoofer setup. This is an accessory, not a loudspeaker. It streamlines rigging by providing the correct short interconnects so that a single feed can supply multiple subwoofers, reducing cable clutter and speeding up load-in and teardown for touring and portable production...

The QSC LS-KIT-J-NA is the North American jumper kit for QSC L Class LS-series powered subwoofers, supplied with two Neutrik PowerCON TRUE1 connectors for safe AC power linking between cabinets. It is an accessory used to daisy-chain adjacent subwoofers in ground-stacked or arrayed configurations, giving system techs a clean, code-compliant way to distribute power without long individual runs. Intended for use with QSC LS118 and other L Class LS subwoofers rather than as a standalone...

The QSC LS118 is a networked, self-powered 18-inch subwoofer in QSC's L Class line array system. It pairs a long-excursion 18-inch driver with a 4,000-watt Class D amplifier to deliver deep, high-output low end that anchors LA108 and LA112 arrays. Designed for touring, rental and installed use, it can be ground-stacked with L Class tops on a pole or arrayed with additional subs, and its onboard networking integrates with QSC's system control and DSP. It suits production companies, houses of...

The QSC M10 KIT-C is an M10 eyebolt suspension kit designed for QSC K and K.2 series powered loudspeakers, letting integrators and rental crews fly these cabinets from their factory M10 rigging inserts. It provides the rated eyebolt hardware needed for safe overhead suspension. This is a rigging accessory only and does not include a loudspeaker.Key FeaturesM10 eyebolt suspension kit for QSC K and K.2 series speakersThreads into the factory M10 fly points on the cabinetEnables safe overhead...

The QSC M10 KIT-S is an M10 forged-shoulder steel eyebolt kit used to suspend (fly) QSC L Class LS-series subwoofers such as the LS118. It is a rigging accessory, not a loudspeaker: the eyebolts thread into the cabinet's M10 suspension points so the subwoofer can be safely hung from certified rigging hardware. QSC offers eyebolt kits matched to specific enclosures; the -S kit is intended for L Class LS subwoofers (distinct from the M10 KIT-C for K/K.2 portable speakers). Rigging should always...

The QSC M10 KIT-W is an M10 forged-steel eyebolt suspension kit for vertically flying QSC loudspeakers such as the E112, E115 and E215, KW-series and AcousticPerformance cabinets. Supplied as a three-pack, it provides rated eyebolt hardware that threads into the factory M10 rigging inserts so integrators and rental crews can suspend cabinets overhead safely. This is rigging hardware only, not a loudspeaker.Key FeaturesM10 forged-steel eyebolt suspension kit (3-pack)For vertical orientation...

The QSC M2-MD-L is the large-capacity media drive kit in the Q-SYS M2 media drive family. It installs into the M.2 media drive slot of compatible Q-SYS Cores to provide extensive internal audio storage for music libraries, stored messages, broadcast content, and multitrack recording. It is aimed at venues that need the most on-Core storage available in the M2 line.Key FeaturesLargest-capacity M2 media drive, providing a minimum of roughly 1000 hours of audio storageInstalls into the M.2 media...

The QSC M2-MD-M is the medium-capacity media drive kit in the Q-SYS M2 media drive family. It installs into the M.2 media drive slot of compatible Q-SYS Cores to add internal audio storage for playing back music and message files directly from the processor. It suits integrators who need more on-Core storage than the small drive offers but do not require the largest library capacity.Key FeaturesMedium-capacity media drive sized between the S and L modelsInstalls into the M.2 media drive slot...

The QSC M2-MD-S is the small-capacity media drive kit in the Q-SYS M2 media drive family. It installs into the M.2 media drive slot of compatible Q-SYS Cores to add internal audio storage for playback of music and message files. It targets integrators who need on-Core audio playback in meeting rooms, retail, and background-music applications.Key FeaturesSmall-capacity media drive providing a minimum of roughly 200 hours of audio storageInstalls into the M.2 media drive slot on supported...

The QSC M8 KIT-A is a professional M8 steel eyebolt suspension kit for permanently or temporarily flying QSC E Series passive loudspeakers such as the E110, E112 and E115. It gives integrators and rental companies a rated, hardware-matched way to suspend cabinets from the factory M8 fly points, so it is an accessory, not a loudspeaker. The kit is supplied as a six-pack of forged eyebolts finished in black.Key FeaturesSix forged M8 steel eyebolts for suspending compatible QSC loudspeakersDesigne...

The QSC MD-110 is a media drive kit designed specifically for the Q-SYS Core 110f processor. It adds internal audio storage so the Core can play back music, messages, and audio files directly from the processor without an external player. It is intended for integrators who need background music, scheduled announcements, or stored message playback in a Q-SYS system.Key FeaturesField-installable media/storage drive for the Core 110fEnables on-Core playback of stored audio filesSupports common...

The QSC Axiom ML1 (Attero Tech) is a compact analog audio extension module that carries mic and line sources over standard Category cabling to a paired host unit such as the AXP2O. It is aimed at cost-conscious commercial installs in retail, restaurants, education and hospitality where local input connectivity is needed without running long analog home-runs.Key FeaturesXLR microphone input with adjustable gain for dynamic mics1/4" line input with fixed attenuation pad3.5 mm consumer input with...

The QSC MP-A20V is a compact 2-channel music and paging amplifier for commercial installations such as retail, restaurants, and hospitality where background music and announcements share one system. It uses QSC FlexAmp technology, letting each output run low-impedance (4/8 ohm) or drive 70V/100V distributed speaker lines without a separate transformer, and adapt the power split between paired channels to match the job.Key Features2-channel Class-D installation amplifier in a compact 1RU...

The QSC MP-A40V is a compact four-channel installation amplifier from the MP-A Series, featuring FlexAmp technology and Class-D output for efficient music and paging systems. In a single rack unit, it drives low-impedance (4/8 ohm) or constant-voltage (70V/100V) loudspeakers, making it ideal for retail, restaurants, offices and background-music/paging applications.Key FeaturesFour channels delivering 200 W each at 4 ohm, 8 ohm, 70V or 100V (per-channel load selectable)FlexAmp technology lets...

The QSC MP-A80V is an 8-channel music and paging amplifier for larger commercial audio systems that combine background music with announcements across many zones. Using QSC FlexAmp technology, each output can run low-impedance 4/8 ohm speakers or drive 70V/100V distributed lines directly, and paired channels can share power in flexible ratios to fit real-world zone loads.Key Features8-channel Class-D installation amplifier for multi-zone systemsFlexAmp technology: every channel drives 4/8 ohm,...

The QSC MP-M40 is an 8x4 music and paging zone mixer from the MP-M Series, designed to bring professional-grade background music and announcements to bars, restaurants, retail spaces, fitness clubs and offices without requiring a specialist programmer. It combines four mic/line inputs and four stereo RCA line inputs with four independently processed output zones plus a music-on-hold output, all managed from intuitive iOS/Android apps. Onboard 32-bit floating-point DSP handles input EQ, gating...

The QSC MP-M80 is an 8x8 music and paging zone mixer from the MP-M Series, built to deliver tailored background music and clear announcements across larger multi-zone venues such as hotels, health clubs, restaurants, retail and worship spaces. It offers eight mic/line inputs and eight stereo RCA line inputs feeding eight independently processed output zones, plus a music-on-hold output. Powerful 32-bit floating-point DSP provides input EQ, gating and dynamics along with per-zone graphic EQ,...

The QSC MP-MFC (black) is a multi-function wall controller for QSC MP-M Series music and paging zone mixers. It is a control accessory, not a mixer. Installed in a wall box, it gives staff simple local control of a zone: selecting audio sources, adjusting volume and triggering functions without opening an app or accessing the rack. Multiple MP-MFC units can be distributed around a venue so each area has its own convenient control point, while system programming stays locked down through the...

The QSC MP-MFC (this SKU is the North American, black finish) is a Decora-style, wall-mount Multi-Function Controller for QSC MP-M series zone mixers. It gives staff and end users simple, local control of a paging/background-music zone without a computer: adjust source selection, volume, and other assigned functions from a familiar in-wall plate. It installs in a standard Decora opening and connects back to the MP-M mixer, making it ideal for retail, hospitality, restaurants, and multi-zone...

The QSC MP-MFC (this SKU is the North American, white finish) is a Decora-style, wall-mount Multi-Function Controller for QSC MP-M series zone mixers. Mounted in a standard Decora wall opening, it lets staff and patrons make simple local adjustments—source selection, level, and other assigned controls—for a given audio zone without a computer or mobile app. It is well suited to restaurants, retail, hospitality, and other multi-zone installations that need clean, tamper-resistant end-user...

The QSC MP-MFC (white) is a multi-function wall controller for QSC MP-M Series music and paging zone mixers. It is a control accessory rather than a mixer. Mounted in a wall box, it provides staff with easy local control of a zone, including audio source selection, volume adjustment and function triggering, without needing the control app or rack access. Several MP-MFC units can be deployed throughout a venue so each area has a dedicated control point, while overall system configuration...

The QSC NL-C179C-WH is a networked ceiling loudspeaker in the Q-SYS NL Series family, finished in white. NL Series loudspeakers connect directly to a Q-SYS network so that audio transport, DSP, and amplification are handled over the network, dramatically reducing cabling and simplifying installation for distributed-audio projects. As a ceiling-mount model it is aimed at background/foreground music and paging in commercial spaces such as retail, hospitality, corporate, and transportation. It is...

The QSC NS-1108P is a managed network switch pre-configured for Q-SYS audio, video and control networks, aimed at AV integrators who want plug-and-play networking without hand-tuning switch settings. It provides eight Gigabit copper ports, four of which supply PoE+ to power endpoints such as page stations, network I/O and cameras, plus SFP uplinks for fiber or long-run connectivity. Factory Q-SYS optimization helps ensure clean multicast, QoS and timing for reliable networked media.Key...