Audio & Video

The QSC NS-1124P is a managed network switch pre-configured for Q-SYS audio, video and control systems, built for medium-to-large installations that need a higher port count and generous PoE. It offers 24 Gigabit copper ports, twelve of which provide PoE+ from a 190 W budget, along with 10-Gigabit SFP+ uplinks for high-bandwidth backbones. Factory Q-SYS tuning handles the multicast, QoS and timing settings that networked media requires, reducing setup time and configuration errors.Key...

The QSC NS-1148P is a high-density managed network switch pre-configured for Q-SYS audio, video and control networks, designed for large venues and campus backbones. It delivers 48 Gigabit copper ports, twenty-four of which supply PoE+ from a substantial 375 W budget, plus 10-Gigabit SFP+ uplinks for connecting to core switching. Factory Q-SYS optimization applies the multicast, QoS and timing configuration that networked media needs, so integrators can deploy dependable AV-over-IP faster.Key...

The QSC NV-32-H is a 4K60 4:4:4 network video endpoint for the Q-SYS ecosystem, designed to bring high-resolution video, audio and USB into a networked AV&C system. It targets meeting rooms, classrooms, lecture halls and other spaces that combine presentation switching with unified-communications platforms such as Microsoft Teams and Zoom.Key FeaturesThree HDMI inputs and two scaling HDMI outputs, all up to 4K60 4:4:4Core-capable: can act as a small Q-SYS Core or as a peripheral...

The QSC PB2082-i is a pull-back bar (rigging accessory) for the QSC Installed Line Array (ILA) system. It attaches to the array to draw the lower enclosures back, letting installers dial in the desired inter-element splay angles for precise vertical coverage of a flown WL2082-i array. This is a hardware accessory, not a loudspeaker. This is the black finish version.Key FeaturesPull-back bar for setting array splay anglesRefines vertical coverage of a flown WL2082-i arrayWorks with the ILA...

The QSC PB2082-i is a pull-back bar (rigging accessory) for the QSC Installed Line Array (ILA) system. It attaches to the array to pull the lower enclosures back, allowing installers to set the inter-element splay angles for precise vertical coverage of a flown WL2082-i array. This is a hardware accessory, not a loudspeaker. This is the white finish version for white ILA systems.Key FeaturesPull-back bar for setting array splay anglesRefines vertical coverage of a flown WL2082-i arrayWorks...

The QSC PC13L1M-NA is a replacement AC power cord for QSC PLD and CXD series power amplifiers. It is an accessory item, not an amplifier, and provides a factory-correct locking connection to keep the mains cable securely attached during transport or in high-vibration rack environments.Key FeaturesNorth American (NEMA) power cord for QSC PLD and CXD amplifiersLocking IEC connector on the amplifier end to prevent accidental disconnectionHeavy 14 AWG conductors for high-current amplifier...

The QSC PLD4.2 is the entry model in the PLD Series of four-channel processing amplifiers, pairing flexible amplification with full onboard loudspeaker DSP in a 2RU chassis. It is built for portable and touring sound reinforcement that needs to power multiple loudspeaker types from a single amplifier without outboard processors.Key FeaturesFour independent channels with Flexible Amplifier Summing Technology (FAST) across one to four outputs500 W (8 ohm), 700 W (4 ohm) and 625 W (2 ohm) per...

The QSC PLD4.3 is a four-channel processing amplifier from the PLD Series, combining high-density amplification with full onboard loudspeaker DSP in a 2RU chassis. Aimed at portable and touring sound reinforcement, it drives several loudspeaker types from one amplifier and removes the need for separate outboard processors.Key FeaturesFour independent channels with Flexible Amplifier Summing Technology (FAST) across one to four outputs900 W (8 ohm), 1,400 W (4 ohm) and 1,200 W (2 ohm) per...

The QSC PLD4.5 is the flagship four-channel processing amplifier in the PLD Series, engineered for portable and touring sound reinforcement that demands high power plus onboard loudspeaker processing in a single 2RU box. It lets engineers drive multiple loudspeaker types from one amplifier while eliminating outboard processors.Key FeaturesFour independent channels with Flexible Amplifier Summing Technology (FAST) to distribute power across one to four outputs1,200 W (8 ohm), 2,000 W (4 ohm)...

The QSC PLENUM KIT is a UL-approved plenum enclosure kit that allows QSC SPA-series commercial power amplifiers to be installed in plenum air-handling spaces (for example, above a drop ceiling used as a return-air plenum). Building and fire codes typically restrict what electronics may sit in these spaces; this kit provides the compliant housing/hardware so an SPA amplifier can be mounted there safely. It is an installation accessory for SPA amplifiers, not an amplifier or loudspeaker...

The QSC PLX1802 is the entry point to the PLX2 Series of lightweight two-channel amplifiers, using a 2-tier Class-H output stage to deliver dependable power from a 21-lb, 2RU chassis. It is a practical choice for portable PA, DJ, small touring and installed systems that need light, reliable amplification.Key FeaturesTwo channels with 2-tier Class-H amplification for efficiency and low weight330 W per channel at 8 ohms and 575 W per channel at 4 ohms (both channels driven)Bridged mono output of...

The QSC PLX2502 is a lightweight two-channel power amplifier from the PLX2 Series, using a 2-tier Class-H output stage to pack solid power into a 21-lb, 2RU chassis. It is well suited to portable PA, DJ, touring and installed systems that value transportability and reliable low-impedance drive.Key FeaturesTwo channels with 2-tier Class-H amplification for efficiency and light weight450 W per channel at 8 ohms and 750 W per channel at 4 ohms (both channels driven)Bridged mono output of 1,500 W...

The QSC PLX3102 is a lightweight, high-power two-channel amplifier from the PLX2 Series, built on a 2-tier Class-H output stage that delivers strong power from a 21-lb, 2RU chassis. It suits touring, portable PA and installed sound applications where light weight and dependable low-impedance performance matter.Key FeaturesTwo channels with 2-tier Class-H amplification for high efficiency and low weight600 W per channel at 8 ohms and 1,000 W per channel at 4 ohms (both channels driven)Bridged...

The QSC PLX3602 is a lightweight, high-power two-channel amplifier from the PLX2 Series, using a 2-tier Class-H output stage to deliver big power from a 21-lb, 2RU chassis. It is a popular choice for touring, portable PA and installed sound where transportability and reliable low-impedance power are priorities.Key FeaturesTwo channels with 2-tier Class-H amplification for efficiency and light weight775 W per channel at 8 ohms and 1,250 W per channel at 4 ohms (both channels driven)Bridged mono...

The QSC PS-1600G is a network paging station for the Q-SYS platform, giving operators a desktop microphone and programmable button interface for zoned announcements and paging. It connects to a Q-SYS system over standard networking and is powered by PoE, so a single Ethernet cable handles both data and power. A monochrome graphic LCD and capacitive-touch buttons let users select zones, trigger pre-recorded messages, adjust levels and confirm page status, while the gooseneck dynamic microphone...

The QSC PS-1600H is a Q-SYS network page station with a handheld push-to-talk microphone. It provides a wired paging point for making live announcements over a Q-SYS system, with assignable buttons for selecting zones or actions and a graphic display for feedback. It is aimed at schools, transit, retail, corporate, and other facilities that need reliable networked paging.Key FeaturesFour assignable buttons for zone or action selectionHandheld PTT (push-to-talk) microphone included240 x 64...

The QSC PS-1650G is a network page station for the Q-SYS platform, built for schools, transit hubs, retail, corporate campuses and any facility that needs reliable live and pre-recorded announcements. It combines 16 direct-select buttons, a capacitive touch keypad and a fixed gooseneck microphone with a push-to-talk switch so operators can quickly target zones and groups. A backlit monochrome graphics display plus Talk, Ready and Busy status LEDs give clear feedback during a page.Key...

The QSC PS-1650H is a Q-SYS network page station with a handheld push-to-talk microphone and an expanded 16-button layout. It provides a wired paging point for live announcements over a Q-SYS system, with assignable buttons for selecting many zones or actions and a graphic display for feedback. It is aimed at larger facilities such as schools, transit hubs, stadiums, and multi-zone commercial sites.Key FeaturesSixteen assignable buttons for multi-zone or multi-action pagingHandheld PTT...

The QSC PS-X is a page station expander accessory for the Q-SYS platform. It adds a rugged, handheld push-to-talk microphone to a compatible Q-SYS page station, letting a single installed station serve a second position or an operator who needs a handheld mic instead of the fixed gooseneck. It is not a standalone unit; it connects to and depends on a host page station.Key FeaturesPage station expander accessory, not a standalone deviceRugged handheld PTT (push-to-talk) microphone...

The QSC Q-SYS PTZ 20x60 is a professional pan-tilt-zoom conferencing camera designed to integrate directly into the Q-SYS platform for meeting rooms, lecture halls, courtrooms and broadcast-style capture. It delivers full-HD 1080p60 video through a 20x optical zoom lens with a 60.7-degree wide horizontal field of view, so it can frame both large rooms and tight close-ups. Simultaneous IP streaming, HDMI and 3G-SDI outputs let it feed soft codecs, recorders and displays at the same time, while...

The QSC PTZ-12x72 is a Q-SYS PTZ-IP conferencing camera built for professionally integrated meeting and event spaces. It combines 12x optical zoom with a wide 72.5-degree field of view and native Q-SYS network integration, so video can be routed, switched, and processed alongside audio and control on a single platform. It targets conference rooms, lecture halls, and multipurpose spaces.Key Features1/2.7-inch low-noise CMOS sensor with 1080p output up to 60 fps12x optical zoom with a 72.5 to...

The QSC PTZ-CMB1 is a ceiling mounting bracket accessory for QSC PTZ-IP conferencing cameras, finished in black. It lets integrators suspend a compatible PTZ camera from the ceiling for a clean, unobtrusive installation, using the camera's image-rotation feature for correct picture orientation. It is intended for conference rooms, lecture halls, and event spaces where a wall or shelf mount is not practical.Key FeaturesCeiling mount bracket for QSC PTZ-IP camerasEnables inverted ceiling...

The QSC PTZ-WMB1 is a dedicated wall-mount bracket for QSC's Q-SYS PTZ and NC Series conferencing cameras. It is a mounting accessory rather than a camera or electronic device, providing a stable, purpose-built surface for positioning a PTZ camera on a wall so it can capture a room at an ideal height and angle. Using the manufacturer's own bracket keeps the camera securely aligned, routes cabling cleanly, and preserves the intended pan-tilt-zoom range. It is intended for AV integrators...

The QSC Q-SYS Core 510i is a high-capacity integrated processor that acts as the central brain of a Q-SYS audio, video and control system. Running the Q-SYS software-based platform on an Intel CPU with a real-time Linux OS, it is built for medium-to-large installations such as corporate campuses, convention centers, transportation hubs and multi-room venues that need dense networked I/O and processing in a single appliance.Key Features256 x 256 networked audio channels over Q-LAN / AES67Eight...