Mounts & Racks

The Chief MSB6040 is a custom interface bracket, the display-side plate that bolts to the back of a screen and then latches onto a Chief mount. Custom brackets are made to match the hole pattern of specific display models, giving a precise fit where a universal bracket might not line up or might add unnecessary depth. Distributor data identifies this bracket as a 200 x 100 mm M6 interface. It is compatible with all Chief M-Series Q-Latch mounts, carts and stands, as well as select swing arms:...

The Chief MSB6044 is a custom interface bracket, the display-side plate that bolts to the back of a screen and then latches onto a Chief mount. Custom brackets are made to match the hole pattern of specific display models, giving a precise fit where a universal bracket might not line up or might add unnecessary depth. Distributor data identifies this bracket as a 200 x 100 mm interface. It is compatible with all Chief M-Series Q-Latch mounts, carts and stands, as well as select swing arms: the...

The Chief MSB6045 is a custom interface bracket, the display-side plate that bolts to the back of a screen and then latches onto a Chief mount. Custom brackets are made to match the hole pattern of specific display models, giving a precise fit where a universal bracket might not line up or might add unnecessary depth. Distributor data identifies this bracket as a 400 x 200 mm interface. It is compatible with all Chief M-Series Q-Latch mounts, carts and stands, as well as select swing arms: the...

The Chief MSB6200 is a custom interface bracket, the display-side plate that bolts to the back of a screen and then latches onto a Chief mount. Custom brackets are made to match the hole pattern of specific display models, giving a precise fit where a universal bracket might not line up or might add unnecessary depth. Distributor data identifies this bracket as a low-profile 200 x 200 mm interface for Sony displays. It is compatible with all Chief M-Series Q-Latch mounts, carts and stands, as...

The Chief MSB6241 is a custom interface bracket, the display-side plate that bolts to the back of a screen and then latches onto a Chief mount. Custom brackets are made to match the hole pattern of specific display models, giving a precise fit where a universal bracket might not line up or might add unnecessary depth. Distributor data identifies this bracket as a 200 x 200 mm M6 interface. It is compatible with all Chief M-Series Q-Latch mounts, carts and stands, as well as select swing arms:...

The Chief MSB6243 is a custom interface bracket, the display-side plate that bolts to the back of a screen and then latches onto a Chief mount. Custom brackets are made to match the hole pattern of specific display models, giving a precise fit where a universal bracket might not line up or might add unnecessary depth. Distributor data identifies this bracket as a 200 x 200 mm M8 interface. It is compatible with all Chief M-Series Q-Latch mounts, carts and stands, as well as select swing arms:...

The Chief MSB6301 is a custom interface bracket, the display-side plate that bolts to the back of a screen and then latches onto a Chief mount. Custom brackets are made to match the hole pattern of specific display models, giving a precise fit where a universal bracket might not line up or might add unnecessary depth. Distributor data identifies this bracket as a 100 x 100 mm interface. It is compatible with all Chief M-Series Q-Latch mounts, carts and stands, as well as select swing arms: the...

The Chief MSB6364 is a custom interface bracket, the display-side plate that bolts to the back of a screen and then latches onto a Chief mount. Custom brackets are made to match the hole pattern of specific display models, giving a precise fit where a universal bracket might not line up or might add unnecessary depth. Distributor data identifies this bracket as an interface for Sharp 64 Series displays. It is compatible with all Chief M-Series Q-Latch mounts, carts and stands, as well as...

The Chief MSBUB is the universal interface bracket for Chief M-Series mounts. It attaches to the back of a medium display and then latches onto any M-Series Q-Latch wall mount, ceiling mount, cart or floor stand, so screens can be swapped or moved between Chief mounts without re-drilling or re-measuring. Adjustable arms accommodate VESA patterns from 100 x 100 mm up to 709 x 431 mm, covering a wide range of medium displays. It is also the bracket required when adding a second display with the...

The Chief MSBVB is an M-Series interface bracket for displays that use common VESA hole patterns. It mounts to the back of the screen and then latches onto a Chief M-Series Q-Latch mount, cart or stand, giving a quick, secure connection. The bracket accepts four standard VESA patterns: 100 x 100 mm, 200 x 100 mm, 200 x 200 mm and 400 x 200 mm. Because it targets these specific patterns, it can be a more compact option than a fully adjustable universal bracket when your display uses one of...

The Chief MSBVS is an M-Series interface bracket for displays that use common VESA hole patterns. It mounts to the back of the screen and then latches onto a Chief M-Series Q-Latch mount, cart or stand, giving a quick, secure connection. The bracket accepts four standard VESA patterns: 100 x 100 mm, 200 x 100 mm, 200 x 200 mm and 400 x 200 mm. Because it targets these specific patterns, it can be a more compact option than a fully adjustable universal bracket when your display uses one of...

The Chief MSD1U is a Fusion wall mount that lets users move a medium display up and down on demand. With 15.75 in (400 mm) of dynamic height travel and built-in height assist, the screen can be lowered for a seated user or a child and raised for a standing audience, all without tools. That flexibility supports accessibility needs and shared rooms used by different groups throughout the day. The mount handles displays weighing 67 to 125 lbs (30.4 to 57 kg) with VESA patterns from 100 x 100 mm...

The Chief MSM1U is a Fusion fixed wall mount with micro-adjustment, built for installations where displays must line up precisely. After the screen is hung, small height and leveling corrections can be made without taking it down, which saves time on multi-screen walls and side-by-side signage. It supports typical 32 to 65 in screens with a 125 lb (56.7 kg) rating and VESA patterns from 100 x 100 mm to 642 x 400 mm in landscape orientation. The mount holds the display just 2 in (5.1 cm) from...

The Chief MSTU is a Thinstall fixed mount designed for today's ultra-thin flat panels. With a minimum depth of just 0.39 in (1 cm), it lets slim displays hang nearly flush against the wall. It is designed for, and only compatible with, displays less than 5 in (127 mm) deep. The mount supports typical 32 to 65 in screens with a 125 lb (56.7 kg) rating and VESA patterns from 100 x 100 mm to 600 x 400 mm, landscape only. A one-piece steel bracket carries two interfaces with GlideLock tool-free...

The Chief MTA1U is a Fusion tilt wall mount for medium flat panel displays. Fusion mounts were shaped by watching installers in the field, and this model brings that thinking to a slim, tilting design. Tilt of +2 to -12 degrees angles the screen down toward viewers to cut glare and improve sightlines when a display is mounted above eye level. It supports typical 32 to 65 in screens with a 125 lb (56.7 kg) rating, VESA patterns from 100 x 100 mm to 650 x 400 mm and displays up to 6 in thick,...

The Chief MTM1U is a Fusion tilt wall mount with micro-adjustment for medium displays. It adds Chief's ControlZone leveling to the standard Fusion tilt design, so height and level can be fine-tuned after the screen is on the wall, a big help when aligning several displays. Tilt of +2 to -12 degrees reduces glare and improves viewing from below. It supports typical 32 to 65 in screens up to 6 in thick with a 125 lb (56.7 kg) rating and VESA patterns from 100 x 100 mm to 650 x 400 mm, at a 2 in...

The Chief MTMP1U is a Fusion micro-adjustable tilt mount built specifically for displays installed in portrait orientation. Tall screens are common in wayfinding, menu boards and retail signage, and this mount is designed around that layout. It supports typical 43 to 47 in screens up to 6 in thick, VESA patterns from 100 x 100 mm to 571 x 600 mm and a 200 lb (90.7 kg) rating. Tilt of +5 to -12 degrees, 10.4 in (26.4 cm) of lateral shift, 1 in of height adjustment and ControlZone leveling help...

The Chief MTMS1U packs key Fusion features into a compact tilt mount that attaches to a single wall stud. Its smaller plate, 14.14 x 18.25 in, hides behind narrow-bezel displays, and single-stud mounting gives freedom to place the screen where studs would otherwise get in the way. It supports typical 32 to 65 in screens up to 6 in thick, a 75 lb (34 kg) rating and VESA patterns from 200 x 200 mm to 455 x 400 mm, in landscape or portrait. Tilt of +2 to -12 degrees, 1 in of height adjustment,...

The Chief MTTU is a Thinstall tilt mount for ultra-thin flat panels. It keeps a slim display close to the wall, with a minimum depth of just 0.75 in (1.9 cm), while still allowing up to 12 degrees of smooth downward tilt to reduce glare. It is designed for, and only compatible with, displays 2 in (51 mm) deep or less. The mount supports typical 26 to 47 in screens with a 100 lb (45.4 kg) rating and VESA patterns from 100 x 100 mm to 600 x 400 mm, landscape only. A one-piece steel bracket...

The Chief MWC6000 is the base version of the MWC pitch mount with CPU storage. It combines a tilting wall mount for a medium flat panel with a protected compartment that hides a small computer, thin client or signage player directly behind the screen, so there is no separate shelf or box on the wall. The storage area accepts equipment up to 14" x 18.82" x 3.82" (356 x 478 x 97 mm). Tilt runs from 0° down to -15° to cut glare, and 1.5 in (3.8 cm) of lateral shift helps center the...

The Chief MWCU pairs the MWC tilting wall mount with a universal interface bracket, giving you a complete medium flat panel solution with a hidden compartment for a computer or signage player. The universal interface covers VESA patterns from 100 x 100mm to 709 x 431mm, so it suits a wide range of 26-55" displays weighing up to 100 lbs (45.4 kg). Behind the screen, the storage area accepts devices up to 14" x 18.82" x 3.82" (356 x 478 x 97 mm), keeping the player secure and...

The Chief MWCV is the MWC tilting CPU-storage mount supplied with a VESA-pattern interface. It is aimed at medium displays that use standard VESA hole patterns of 100 x 100, 200 x 100, 200 x 200 or 400 x 200mm. A storage area behind the screen holds a computer, thin client or digital signage player up to 14" x 18.82" x 3.82" (356 x 478 x 97 mm), keeping hardware out of sight and protected. The mount carries typical 26-55" screens up to 100 lbs (45.4 kg), tilts from 0° to...

The Chief MWRIWUB is the in-wall version of the MWR medium swing arm, supplied with a universal interface bracket. The arm assembly recesses into the wall cavity, so when the display is folded back it sits only 0.5 in (1.3 cm) from the wall surface for a clean, nearly flush appearance. Pull the screen out on its 22" extension arm when you need to angle it toward a different seating area, then swivel and tilt it into place. Tilt runs from +2° to -15°, and a post-installation leveling roll...

The Chief MWRUB is a medium articulating wall arm that gives flat panels a wide range of viewing angles. The arm reaches out about 25 inches yet folds back to a slim profile of 3.4 in (8.6 cm) when the screen is pushed home. Chief rates it for 125 lbs (56.7 kg) and typical 30-55" displays with VESA patterns from 100 x 100mm to 709 x 431mm. Swivel reaches up to 90° left or right depending on screen size, and built-in lateral shift of 6" in each direction lets you center the image on...