Mounts & Racks

The Chief LWM3X1UP is a Fusion wall mount for digital menu boards, holding 3 displays in a 3x1 portrait row. A horizontal extrusion with depth adjustment brings the screens into a clean line even on uneven walls, while leaving room to reach behind the displays for service. Each screen can tilt between 0 and -20 degrees to angle content toward customers, and ControlZone micro-height adjustment fine-tunes alignment after hanging. Displays hook on without tools, and an optional padlock adds...

The Chief LWM4X1UM is a Fusion modular wall mount for digital menu boards, holding 4 displays in a 4x1 landscape row. A horizontal extrusion with depth adjustment brings the screens into a clean line even on uneven walls, while leaving room to reach behind the displays for service. Each screen can tilt between 0 and -20 degrees to angle content toward customers, and ControlZone micro-height adjustment fine-tunes alignment after hanging. Displays hook on without tools, and an optional padlock...

The Chief LWM5X1UM is a Fusion modular wall mount for digital menu boards, holding 5 displays in a 5x1 landscape row. A horizontal extrusion with depth adjustment brings the screens into a clean line even on uneven walls, while leaving room to reach behind the displays for service. Each screen can tilt between 0 and -20 degrees to angle content toward customers, and ControlZone micro-height adjustment fine-tunes alignment after hanging. Displays hook on without tools, and an optional padlock...

The Chief MAC1003B is an arm extension kit for the Chief J-Series family of swing arm display mounts. It is an add-on accessory, not a complete mount: it is installed on an existing J-Series arm to add an extension section when the standard arm configuration does not reach far enough for the layout of the room or workstation. The kit is finished in black so it blends with matching black J-Series hardware, and it is offered in both black (MAC1003B) and silver (MAC1003S) versions. Because...

The Chief MAC1003S is an arm extension kit for the Chief J-Series family of swing arm display mounts. It is an add-on accessory, not a complete mount: it is installed on an existing J-Series arm to add an extension section when the standard arm configuration does not reach far enough for the layout of the room or workstation. The kit is finished in silver so it blends with matching silver J-Series hardware, and it is offered in both black (MAC1003B) and silver (MAC1003S) versions. Because...

The Chief MAC118B is a metal stud accessory for Chief J-Series swing arm mounts. Steel stud walls cannot hold an articulating arm the way wood studs or solid masonry can, so this adapter provides a dedicated attachment solution that spreads the arm's load for a solid, dependable installation in commercial construction. It is designed for use with the Chief JWD and JWS swing arm mounts. It is not compatible with the JWP, so check the arm model before ordering. The adapter is finished in black...

The Chief MAC230B is a protective back cover for ceiling-mounted medium displays. When a screen hangs from the ceiling, the back of the display and its cabling are often visible from across the room, which looks unfinished in lobbies, retail spaces and transit areas. This cover closes off that area, hiding cables and a compact media player behind a clean black panel for a more professional look. It installs directly onto the Chief MSBUB universal interface bracket and is designed for use with...

The Chief MAC251 is a component storage adapter for Chief M-Series display mounts. It gives a small PC, DVD player or digital signage media player a secure home on the mount itself, so the source device sits right behind the screen instead of on a shelf or in a wall cavity. Keeping the player at the display shortens cable runs and keeps the installation tidy. The MAC251 is the larger of the two M-Series CPU adapters and accepts equipment up to 13.75 in (349 mm) wide and up to 3.88 in (99 mm)...

The Chief MAC252 is the small-size component adapter for Chief M-Series display mounts. It holds a compact PC, DVD player or digital signage media player on the mount behind the screen, keeping the source close to the display and the cabling short and out of sight. The adapter accepts equipment up to 9.5 in (241 mm) wide, 10 in (254 mm) tall and 2 in (51 mm) deep, which suits many slim signage players and streaming devices. It is a universal, on-display design in a black finish and is TAA...

The Chief MAC400 is a rotation adapter for medium flat panel installations on Chief M-Series mounts. It sits between the display and the mount and lets the screen be turned between landscape and portrait by hand, with no tools, in either direction. That makes it useful where content changes format, such as signage that alternates between menus and video, or carts and stands that are re-used for different events. The adapter provides 2 degrees of over-travel so the screen can be fine-leveled...

The Chief MAC501B is an in-wall accessory that lets a Chief swing arm fold back into the wall cavity, so the arm disappears and the display sits closer to the wall when retracted. It converts a Chief on-wall arm into an in-wall installation for a flush, finished appearance in rooms where a protruding arm would look out of place. The box measures 14.5 x 14.5 x 3.88 in (368 x 368 x 99 mm) and is intended for typical screen sizes of 26 to 40 in. Large conduit knockouts simplify cable routing and...

The Chief MAC720 is a multi-display accessory for Chief medium flat panel carts and floor stands. Chief catalogs it as a dual vertical display accessory, used to arrange two screens one above the other on a single cart or stand, and the distributor describes it as a clamp head accessory for medium flat panel carts and stands. Stacking displays vertically is a common way to show a presenter's content and a video call at the same time, or to build taller signage from two standard screens. The...

The Chief MAC722 converts a Chief medium cart or floor stand into a dual display system, holding two screens side by side. It is designed for the MFCUB mobile cart and the MF1UB floor stand. It supports two displays that measure 39.2 to 58.8 in (99.6 to 149.4 cm) wide, and both displays must be the same size. The rated capacity is 63 lbs (28.6 kg) per display. Each display attaches with its own MSBUB universal interface bracket. The cart or stand already includes one MSBUB, so you will need to...

The Chief MAC790 adds swivel movement to Chief medium flat panel carts and floor stands, which on their own provide tilt and height adjustment. With the accessory installed, the screen can be turned toward an audience, a presenter or a different seating area without repositioning the whole cart or stand. It is compatible with Chief MF1 floor stands and MFC mobile carts and combines tilt and swivel for flexible viewing. The accessory has a rated weight capacity of 125 lbs (56.7 kg), is finished...

The Chief MCB1U is a Fusion ceiling mount that hangs two medium displays back to back, so the same or different content can be seen from both directions. It is a natural fit for corridors, concourses and open retail floors. It supports typical 32 to 65 in screens, a 125 lb (56.7 kg) weight capacity and VESA patterns from 200 x 100 mm to 460 x 400 mm. Tilt and +/- 3 degrees of roll let installers set and level each screen after it is hung, and displays can be oriented in landscape or portrait....

The Chief MCM1U is a Fusion ceiling mount for a single medium flat panel display. It suspends the screen from a ceiling column so it can be seen over crowds, counters and shelving, which is ideal for signage, menu boards and information displays. The mount supports typical 32 to 65 in screens with a 125 lb (56.7 kg) weight capacity and VESA patterns from 200 x 100 mm to 460 x 400 mm. Tilt aims the screen down toward viewers, and 3 degrees of roll adjustment lets the installer level the display...

The Chief MCM1X2U is a Fusion ceiling kit that stacks two medium displays one above the other on a single ceiling column. A vertical pair of screens gives menu boards, departure listings and promotional signage more room for content without widening the footprint. The 1x2 array configuration has a rated capacity of 100 lbs (45.4 kg) and supports VESA patterns from 200 x 100 mm to 460 x 400 mm in landscape or portrait. Each position offers tilt plus 3 degrees of roll adjustment so the screens...

The Chief MF2US is a floor stand that holds two medium displays back to back, so a single stand can serve viewers on both sides of a lobby, aisle or exhibit. It suits digital signage and corporate presentations where wall mounting is not an option. It supports typical 32 to 65 in screens with a 125 lb (56.7 kg) rating and offers 34 in (86.4 cm) of telescoping height adjustment without tools. Centris technology provides fingertip tilt that stays where you set it. ClickConnect gives an audible...

The Chief MFCUB is a lightweight mobile cart for medium flat panel displays. Its collapsible design makes it easy to move between rooms or pack up for transport, which is why it is popular in rental and staging as well as corporate settings. The cart supports typical 32 to 65 in screens with a 125 lb (56.7 kg) rating and provides 24 in (609.6 mm) of telescoping height adjustment. Tilt and post-installation roll leveling help set the screen just right, and the display can be mounted in...

The Chief MFCUS is a lightweight mobile cart for medium flat panel displays. Its collapsible design makes it easy to move between rooms or pack up for transport, which is why it is popular in rental and staging as well as corporate settings. The cart supports typical 32 to 65 in screens with a 125 lb (56.7 kg) rating and provides 24 in (609.6 mm) of telescoping height adjustment. Tilt and post-installation roll leveling help set the screen just right, and the display can be mounted in...

The Chief MFMUB is a low-height mobile cart built for confidence monitors, the screens placed in front of a stage or lectern so presenters can see slides, notes or a teleprompter feed. It positions the display in the 3 to 4 ft (91 to 122 cm) height range. The cart supports typical 32 to 65 in displays with a 125 lb (56.7 kg) rating, tilts the screen up to +15 or +45 degrees and offers 12 in (30.5 cm) of manual height adjustment. Centris fingertip tilt stays where you set it, ClickConnect...

The Chief MFQUB is a low-height mobile cart built for confidence monitors, the screens placed in front of a stage or lectern so presenters can see slides, notes or a teleprompter feed. Its compact 2 ft class design keeps the display low to the floor. The cart supports typical 32 to 65 in displays with a 125 lb (56.7 kg) rating, tilts the screen up to +15 or +45 degrees and offers 12 in (30.5 cm) of manual height adjustment. Centris fingertip tilt stays where you set it, ClickConnect confirms...

The Chief MPWUB is a swing arm wall mount for medium flat panel displays. It extends the screen away from the wall and swings it toward viewers, which is useful in corners, along sightlines that change during the day, and in rooms where the display has to face more than one seating area. It supports typical 32 to 65 in screens with a 100 lb (45.4 kg) rating and VESA patterns from 100 x 100 mm to 709 x 431 mm, in landscape or portrait orientation. When folded back it sits 3.4 in (8.6 cm) off...

The Chief MSA1U is a Fusion fixed wall mount for medium flat panel displays. It holds the screen tight to the wall at a depth of just 2 in (5.1 cm), giving a clean, close-to-wall look that suits signage, conference rooms and public spaces. It supports typical 32 to 65 in screens with a 125 lb (56.7 kg) rating and VESA patterns from 100 x 100 mm to 642 x 400 mm in landscape orientation. Generous lateral shift of 12.9 in (32.8 cm) lets the installer center the display even when studs are not...