Mounts & Racks

The Chief MWRUB-G is the TAA-compliant listing of the MWR medium swing arm, intended for government, military and other projects that require Trade Agreements Act sourcing. Functionally it matches the MWRUB: an articulating arm with roughly 25 inches of reach that folds back to 3.4 in (8.6 cm) deep when the screen is pushed against the wall. It supports typical 30-55" displays up to 125 lbs (56.7 kg) and VESA patterns from 100 x 100mm to 709 x 431mm via the included interface. Extension,...

The Chief OB1U is built for classrooms that are adding an interactive flat panel without removing the old whiteboard or chalkboard. Telescoping legs stand the mount off the wall and around the board, rail, or trim, and a minimum 4" (102mm) wall clearance keeps the assembly clear of the surface below. The display can be raised or lowered across a 26" (660 mm) range so younger students or seated users can reach the touch surface. Interface brackets attach to the screen first and then...

The Chief OD34 packages a large outdoor flat panel mount with a 3' to 4' column so you can order a complete outdoor ceiling or pedestal installation under one part number. It is the shorter-drop companion to the OD45 system. The display head accepts VESA patterns from 200 x 100mm to 800 x 400mm and typical 42-65" displays up to 250 lbs (113.4 kg), with tilt from +7.6° down to -20° to aim the image at viewers below or in front. Every component is rated for outdoor use, making the...

The Chief OD45 gathers everything needed for a single outdoor display hung from a concrete ceiling or raised on a floor pedestal. The kit includes the OLCM1U large outdoor ceiling and pedestal mount, an ODAC0405B 4' to 5' outdoor column, an ODA330B concrete ceiling and pedestal plate, and an ODAPCVRB plate cover. All parts are designed to handle rain, humidity, salt air, direct sun and strong wind, and the system is rated to 2000 ft-lbs of maximum moment force so engineers can check...

The Chief ODA330B is the structural base plate for Chief outdoor ceiling and pedestal systems. Because the plate is separate from the column, installers can anchor it first and then lift the lighter column and display mount into place. Two oversized holes hold the plate while you use the remaining holes as a drilling template. It anchors into poured concrete with a 4" minimum embedment (5000 psi minimum compressive strength) or pre-cast concrete with a 2" minimum embedment (6000 psi...

The Chief ODAC0203B is an outdoor-rated extension column that sets the drop or rise of a Chief outdoor display mount. It adjusts in 1" increments across 23" - 36" (584mm-914 mm), so you can dial in the exact display height on site. Use it to hang a display from a concrete ceiling or to raise it on a floor pedestal. The column is engineered for rain, humidity, salt air, sun exposure and high winds, and Chief rates it to 2000 ft-lbs of maximum moment force for use in wind-load...

The Chief ODAC0304B is an outdoor-rated extension column that sets the drop or rise of a Chief outdoor display mount. It adjusts in 1" increments across 33" - 48" (838mm-1219 mm), so you can dial in the exact display height on site. Use it to hang a display from a concrete ceiling or to raise it on a floor pedestal. The column is engineered for rain, humidity, salt air, sun exposure and high winds, and Chief rates it to 2000 ft-lbs of maximum moment force for use in wind-load...

The Chief ODAC0405B is an outdoor-rated extension column that sets the drop or rise of a Chief outdoor display mount. It adjusts in 1" increments across 45" - 60" (1143mm - 1524 mm), so you can dial in the exact display height on site. Use it to hang a display from a concrete ceiling or to raise it on a floor pedestal. The column is engineered for rain, humidity, salt air, sun exposure and high winds, and Chief rates it to 2000 ft-lbs of maximum moment force for use in wind-load...

The Chief ODAC0506B is an outdoor-rated extension column that sets the drop or rise of a Chief outdoor display mount. It adjusts in 1" increments across 57" - 72" (1448mm - 1828 mm), so you can dial in the exact display height on site. Use it to hang a display from a concrete ceiling or to raise it on a floor pedestal. The column is engineered for rain, humidity, salt air, sun exposure and high winds, and Chief rates it to 2000 ft-lbs of maximum moment force for use in wind-load...

The Chief ODAC0708B is an outdoor-rated extension column that sets the drop or rise of a Chief outdoor display mount. It adjusts in 1" increments across 81" - 96" (2057mm - 2438 mm), so you can dial in the exact display height on site. This tall column is intended for floor-standing pedestal installations only and is not designed to hang from a ceiling. The column is engineered for rain, humidity, salt air, sun exposure and high winds, and Chief rates it to 2000 ft-lbs of...

The Chief ODAPCVRB is a decorative cover for the ODA-series outdoor ceiling and pedestal plates. Once the ODA330B plate is anchored and the column is attached, the cover slips over the base to hide anchors, plate edges and hardware, giving the installation a clean finished appearance whether the display hangs from a ceiling or stands on a pedestal. Like the rest of the Chief outdoor family, it is built to stand up to rain, humidity, ocean air, sun exposure and high winds. Weatherproof...

The Chief ODMB1X1 is the single configuration of Chief Velocity, a modular outdoor pedestal system for 55" outdoor displays from Samsung and LG. It is aimed at quick-service restaurant drive-thru menu boards and outdoor wayfinding signage. This version holds 1 display side by side in portrait orientation, with overall dimensions of 15.336" x 28.25" x 67.375" (390 x 718 x 1711 mm). Because the system is modular, a single can later grow to a double or triple without replacing...

The Chief ODMB2X1 is the dual configuration of Chief Velocity, a modular outdoor pedestal system for 55" outdoor displays from Samsung and LG. It is aimed at quick-service restaurant drive-thru menu boards and outdoor wayfinding signage. This version holds 2 displays side by side in portrait orientation, with overall dimensions of 15.336" x 56.5" x 67.375" (390 x 1435 x 1711 mm). Because the system is modular, a single can later grow to a double or triple without replacing...

The Chief ODMB3X1 is the triple configuration of Chief Velocity, a modular outdoor pedestal system for 55" outdoor displays from Samsung and LG. It is aimed at quick-service restaurant drive-thru menu boards and outdoor wayfinding signage. This version holds 3 displays side by side in portrait orientation, with overall dimensions of 15.336" x 84.75" x 67.375" (390 x 2153 x 1711 mm). Because the system is modular, a single can later grow to a double or triple without...

The Chief ODMLA25 is an articulating wall arm built for outdoor installations and damp indoor spaces such as pool houses and locker rooms. Extension, swivel and tilt let viewers angle the screen toward different seating areas, and the arm folds back to a minimum depth of 4.88 in (12.4 cm). It supports typical 32-80" displays up to 150 lbs (68 kg) with VESA patterns from 75 x 75mm to 709 x 444mm, and tilts 15° up or down. An outdoor-rated protective finish and stainless-steel hardware...

The Chief ODMLT is a low-profile tilting wall mount designed for outdoor installations and humid indoor environments. It holds the display just 3.27 in (8.3 cm) from the wall and tilts 15° up or down to reduce glare from sun and overhead lighting, while lateral shift helps center the screen after installation. Rated for 175 lbs (79.4 kg) with VESA patterns from 127 x 100mm to 643 x 430mm, it works with most indoor or outdoor displays. The wall plate suits 16" or 24" on-center studs....

The Chief ODMPB1 is the modular base that the Velocity outdoor pedestal system is built on. It can be ordered by itself, so an electrician or general contractor can anchor it to a concrete pad and bring power in long before the displays and AV crew arrive. That split approach avoids scheduling conflicts between trades. The base is easy to transport and includes three storage panels for media players and other components, a mounting template, and an adapter plate for installing an outlet. The...

The Chief ODMPF1 is the display frame component of the Velocity outdoor pedestal system. Sold individually, it comes with the hardware needed to attach a 55" outdoor display in portrait orientation and bolts to the top of an ODMPB1 modular base. A single base takes up to three frames, so you can start with one menu board and add more as the location grows, or ship frames separately from bases to simplify logistics on large rollouts. Chief rates each frame for 200 lbs (90.72 kg), with 343...

The Chief OFB140 is an office furniture bracket that adapts Chief Kontour and K-series monitor arm wall mounts to the Steelcase Series 9000 panel system. Instead of clamping arms to the desk, the bracket lets you hang them from the workstation panel, freeing desk space and keeping monitors at a consistent height across a row of cubicles. It is a custom-fit bracket made specifically for the Series 9000 system, so check your furniture line before ordering. The bracket ships in black and is TAA...

The Chief OFB207 adapts Chief Kontour and K-series monitor arm wall mounts to an Ergotron wall track. It is a practical option when a facility already has Ergotron track installed in clinical, office or lab spaces but wants to standardize on Chief monitor arms. The bracket mounts to the track and provides the attachment point for the Chief arm, giving you flexible monitor positioning without new wall penetrations. It is a custom bracket made for this specific track system, finished in black...

The Chief OFB215S is a mounting interface designed to connect Chief Kontour K1C and K2C monitor arms to the Steelcase FrameOne furniture system. Rather than clamping to the desk edge or using a grommet hole, the arms attach through this interface for a tidy, furniture-integrated look that suits benching and open-plan layouts. The interface is finished in silver and is TAA compliant. The arm itself is sold separately; the K1C and K2C arms determine monitor size, weight range and adjustment....

The Chief OFBLUB is the lightweight version of Chief's universal office furniture slatwall interface. It lets you hang Kontour or K-series monitor arm wall mounts on the slatwall found on most major office furniture brands, keeping the desktop clear and the monitor at a fixed working height. It is rated for up to 25 lbs (11.3 kg) of total monitor weight, which suits typical single monitors and light dual setups. For heavier or multi-monitor loads up to 40 lbs, choose the heavy-duty OFBU...

The Chief OFBLUS is the lightweight version of Chief's universal office furniture slatwall interface. It lets you hang Kontour or K-series monitor arm wall mounts on the slatwall found on most major office furniture brands, keeping the desktop clear and the monitor at a fixed working height. It is rated for up to 25 lbs (11.3 kg) of total monitor weight, which suits typical single monitors and light dual setups. For heavier or multi-monitor loads up to 40 lbs, choose the heavy-duty OFBU...

The Chief OFBUB is Chief's heavy-duty universal slatwall interface. It mounts Kontour or K-series monitor arm wall mounts to the slatwall on most major office furniture brands, so monitors hang from the workstation instead of clamping to the desk. With a 40 lbs (18.1 kg) total rating, it handles single heavy monitors or multi-monitor arm setups that exceed the 25 lb limit of the lightweight OFBLU interface. Because it is universal, one part number covers mixed furniture brands across a...