Mounts & Racks

The Chief OFBUS is Chief's heavy-duty universal slatwall interface. It mounts Kontour or K-series monitor arm wall mounts to the slatwall on most major office furniture brands, so monitors hang from the workstation instead of clamping to the desk. With a 40 lbs (18.1 kg) total rating, it handles single heavy monitors or multi-monitor arm setups that exceed the 25 lb limit of the lightweight OFBLU interface. Because it is universal, one part number covers mixed furniture brands across a...

The Chief OLCB1U is a large outdoor mount head that holds two flat panels back to back, so content can be seen from both directions in a concourse, walkway or open patio. Each side accepts typical 42-65" displays with VESA patterns from 200 x 100mm to 800 x 400mm, and tilt from +7.6° to -20° aims screens down toward viewers. It is built for outdoor environments, UL Listed and TAA compliant, and connects to Chief ODAC outdoor columns and the ODA330B concrete plate to hang from a ceiling or...

The Chief OLCB2X1U puts two side-by-side displays on each face of a back-to-back outdoor mount, for four screens in total. It suits wide-format menus, scoreboards and wayfinding that must be read from both directions. Displays are typically 42-55" with VESA patterns from 200 x 100mm to 800 x 400mm, and tilt runs from +7.6° to -20°. It is built for outdoor environments, UL Listed and TAA compliant, and connects to Chief ODAC outdoor columns and the ODA330B concrete plate to hang from a...

The Chief OLCM1U is the large single-display head of Chief's outdoor ceiling and pedestal family. It carries typical 42-65" screens up to 250 lbs (113.4 kg) with VESA patterns from 200 x 100mm to 800 x 400mm, and its tilt range of +7.6° to -20° points the picture at viewers below or in front. It is the mount included in the OD34 and OD45 outdoor bundles. It is built for outdoor environments, UL Listed and TAA compliant, and connects to Chief ODAC outdoor columns and the ODA330B...

The Chief OLCM2X1U holds two landscape displays next to each other on a single outdoor ceiling or pedestal column, ideal for wide menus, schedules and wayfinding. Each display uses VESA 200 x 100mm to 800 x 400mm, and tilt runs from +7.6° to -20° so the pair can be angled toward viewers. The mount is rated for 250 lbs (113.4 kg). It is built for outdoor environments, UL Listed and TAA compliant, and connects to Chief ODAC outdoor columns and the ODA330B concrete plate to hang from a ceiling or...

The Chief OLF55BP-LG is the LG-specific version of the Impact outdoor portrait kiosk. It creates a freestanding, double-height digital sign around a single LG XE4F-M series outdoor display in portrait orientation, listed for the LG55XE4F-M and LG49XE4F-M. The slim enclosure stands 84.12" tall, 36.3" wide and just 7.5" deep (2137 x 922 x 191 mm), giving a clean totem profile for plazas, campuses and entrances. It is rated for outdoor use, includes thermal management for the...

The Chief OLF55BP-S Impact outdoor kiosk turns a Samsung OH55F or OH55A outdoor display into a slim, freestanding portrait sign. The enclosure is finished in outdoor-rated paint and has been wind tested up to 140 mph. Inside, an IP54-rated storage area protects the media player and other AV gear from harsh conditions, and a Lever Lock panel works with Forward AV mounting clips for fast device installation. A fan and active cooling vents keep electronics at stable temperatures, and the space is...

The Chief OXCB1U is the extra-large back-to-back head in Chief's outdoor ceiling and pedestal family. It hangs two big screens, typically 65-84", facing opposite directions so content can be seen from both sides of a concourse or plaza. Displays use VESA 200 x 100mm to 800 x 400mm, the mount is rated for 250 lbs (113.4 kg), and tilt runs from +7.6° to -20°. It is built for outdoor environments, UL Listed and TAA compliant, and connects to Chief ODAC outdoor columns and the ODA330B...

The Chief OXCM1U is the extra-large single-display head in Chief's outdoor ceiling and pedestal line. It supports typical 65-84" screens up to 250 lbs (113.4 kg) with VESA patterns from 200 x 100mm to 800 x 400mm, and tilts from +7.6° to -20° to aim the image at the audience. Pair it with the ODAC column length that puts the screen at the right height for your space. It is built for outdoor environments, UL Listed and TAA compliant, and connects to Chief ODAC outdoor columns and the...

The Chief PAC102B is a component shelf for ceiling-pole installations. It mounts directly to standard fixed or adjustable 1.5" NPT extension columns as well as Chief CPA columns, giving you a place right on the pole for a media player, wireless receiver, HDBaseT extender or similar device. Keeping the component on the column shortens cable runs to the display or projector and avoids opening the ceiling for equipment. Installation is quick and all required hardware is included. Finished in...

The Chief PAC103 is a safety strap that keeps an AV component from shifting or falling off a Chief accessory shelf. It is a simple, solid-steel add-on for shelves such as the PAC102B component pole shelf, useful wherever equipment is mounted overhead or in public spaces. Installation is quick, and the mounting hardware is included. Black finish. Use it on overhead installations, in schools, airports or venues, or anywhere vibration or tampering is a concern. The strap adds a second layer of...

The Chief PAC115 is a metal stud anchor kit containing 4 anchors, intended for installers who need to fasten a display mount to a wall framed with steel studs rather than wood. Commercial buildings, tenant build-outs and modern office interiors commonly use light-gauge metal framing, and standard lag bolts are not suitable there. This kit supplies dedicated anchors so the mount can be secured properly to the stud and drywall assembly. Chief does not assign the kit a single load rating: the...

The Chief PAC116 is a metal stud anchor kit containing 8 anchors, intended for installers who need to fasten a display mount to a wall framed with steel studs rather than wood. Commercial buildings, tenant build-outs and modern office interiors commonly use light-gauge metal framing, and standard lag bolts are not suitable there. This kit supplies dedicated anchors so the mount can be secured properly to the stud and drywall assembly. Chief does not assign the kit a single load rating: the...

The Chief PAC117 is a metal stud anchor kit containing 28 anchors, intended for installers who need to fasten a display mount to a wall framed with steel studs rather than wood. Commercial buildings, tenant build-outs and modern office interiors commonly use light-gauge metal framing, and standard lag bolts are not suitable there. This kit supplies dedicated anchors so the mount can be secured properly to the stud and drywall assembly. Chief does not assign the kit a single load rating: the...

The Chief PAC124B is a 24-inch stud adapter made for Chief swing arm display mounts. It is a mounting hardware accessory that sits between the wall structure and the swing arm, giving installers a wider attachment interface when the arm's own wall plate does not line up with the framing at the install location. Because articulating arms place significant leverage on the wall, a solid connection to structure is critical, and an adapter like this helps achieve it without improvising custom...

The Chief PAC136B ClickConnect Locking Flag Kit is a small security accessory that adds extra safety to flat panel installations built on Chief's ClickConnect interface. Once the display is hung, the flag provides an additional point of retention so the screen is less likely to be disturbed or lifted off unintentionally. In public or high-traffic spaces this kind of secondary retention is a sensible addition to any wall-mounted display. The kit is finished in black to match Chief mounting...

The Chief PAC138 ClickConnect Padlock is a keyed security accessory that provides an additional safety bolt for lock-down of flat panel installations. Wall-mounted displays in public spaces are attractive targets for tampering and theft, and a simple keyed lock is one of the most effective deterrents. The PAC138 secures the ClickConnect connection so the display cannot easily be released from its mount without the key. It ships with two keys, giving facilities staff a spare for service access....

The Chief PAC200 is a conversion kit that turns a Chief PPC mobile cart, built for a single display, into a dual-display cart with the same features as Chief's PPD model. Rather than replacing an existing cart when a room's needs change, this kit lets you reuse the base and column you already own and add a second screen. That is useful for video conferencing, where one screen shows participants and another shows content, or for training and presentation spaces where side-by-side displays are...

The Chief PAC230B is a large aesthetic cover that finishes the back of a ceiling-mounted flat panel installation. When displays hang from the ceiling, the rear is often visible from across the room, exposing cables, power supplies and media players. This cover hides those components behind a clean black panel, giving the install a tidy, professional appearance. It is made for Chief's PCSU universal ceiling mount and attaches directly to the PSBUB universal interface bracket, and it ships with...

The Chief PAC251 is a P-Series component adapter that lets you mount a small computer, digital media player or DVD player directly behind a flat panel display. Keeping the source device on the mount eliminates a separate shelf or credenza, shortens cable runs and keeps hardware out of sight and out of reach. Among Chief's P-Series CPU adapters, the PAC251 suits mid-depth devices up to 3.5 inches deep. Its universal design accepts a range of device sizes within the listed width and height...

The Chief PAC252 is a P-Series component adapter that lets you mount a small computer, digital media player or DVD player directly behind a flat panel display. Keeping the source device on the mount eliminates a separate shelf or credenza, shortens cable runs and keeps hardware out of sight and out of reach. Among Chief's P-Series CPU adapters, the PAC252 is the deepest of the three, accepting devices up to 4.5 inches deep. Its universal design accepts a range of device sizes within the listed...

The Chief PAC253 is a P-Series component adapter that lets you mount a small computer, digital media player or DVD player directly behind a flat panel display. Keeping the source device on the mount eliminates a separate shelf or credenza, shortens cable runs and keeps hardware out of sight and out of reach. Among Chief's P-Series CPU adapters, the PAC253 is a slim option for thin devices up to 1.81 inches deep but up to 20 inches tall. Its universal design accepts a range of device sizes...

The Chief PAC260D is a digital media player mount that attaches to the VESA 100 pattern on the back of a display, giving a small CPU, signage player or video conferencing codec a secure, dedicated home. It accepts devices up to 10 x 10 x 4 inches (254 x 254 x 102 mm), which covers most compact PCs and streaming or signage players. This version does not include a power brick mount; choose the PAC261D if you also need to secure an external power supply. Mounting the device close to the display...

The Chief PAC260P is a digital media player mount that clamps to a pole or column 1.5" to 1.95" (38 - 49 mm) in diameter, giving a small CPU, signage player or video conferencing codec a secure, dedicated home. It accepts devices up to 10 x 10 x 4 inches (254 x 254 x 102 mm), which covers most compact PCs and streaming or signage players. This version does not include a power brick mount; choose the PAC261P if you also need to secure an external power supply. Mounting the device close to the...