Mounts & Racks

The Chief LSM1U adds fine height and leveling adjustment to a low-profile Fusion fixed wall mount. After the display is hung, installers can micro-adjust its height and level it precisely, then slide it laterally to center it on the wall, all while keeping the screen just 2" from the surface. It supports 42"-86" displays up to 200 lbs, making it a go-to for aligning multiple screens side by side or matching a display to millwork. OSHPD approval suits healthcare work. At a...

The Chief LSM1U-G is the TAA-compliant edition of the large Fusion micro-adjustable fixed mount, built for government, military, and other procurement that requires TAA sourcing. It keeps a 42"-86" display 2" from the wall while providing 1" of micro height adjustment for leveling and aligning after installation. Lateral shift centers the screen regardless of stud location, and the mount handles up to 200 lbs. Overall dimensions are 18.25" x 34.75" x 2". At a...

The Chief LSTU Thinstall fixed mount is engineered for the slimmest possible installation, holding a large display only 0.39" from the wall. It supports 42"-86" screens up to 125 lbs that are less than 5" deep. GlideLock latching secures the display without tools, and lateral shift helps center the screen. A cable stand and bottom pull-out make it easier to reach connections, and open wall plates leave room for electrical boxes. Because the profile is so thin, an in-wall...

The Chief LTA1U is a large Fusion tilt mount shaped by installer feedback. Centris tilt provides smooth, fingertip angle adjustment from +2° to -12°, and ClickConnect latching confirms the display is secured. Centerless lateral shift lets the screen slide side to side after hanging, so it can be centered regardless of stud placement. The mount keeps a 2" profile, carries up to 200 lbs, and is OSHPD approved for healthcare projects. It accommodates displays up to 6" thick. At a...

The Chief LTM1U combines tilt with post-installation height fine-tuning in a large Fusion wall mount for 42"-86" displays up to 200 lbs. Centris tilt delivers fingertip angle adjustment from +2° to -12°, while ControlZone provides 1" of micro height and leveling adjustment after the display is hung. Centerless lateral shift slides the screen side to side for centering, and ClickConnect latching confirms a secure hang. The mount stays a slim 2" from the wall, supports...

The Chief LTM1U-G is the TAA-compliant edition of the large Fusion micro-adjustable tilt mount, built for government, military, and public-sector purchasing. Centris tilt delivers fingertip angle adjustment from +2° to -12°, while ControlZone provides 1" of micro height and leveling adjustment after the display is hung. Centerless lateral shift slides the screen side to side for centering, and ClickConnect latching confirms a secure hang. The mount stays a slim 2" from the wall,...

The Chief LTTU Thinstall tilt mount pairs with today's ultra-thin flat panels to keep a tilting installation almost flush, with a minimum depth of just 0.75". A one-piece steel bracket carries two tilting interfaces that provide 12° of smooth fingertip tilt, and GlideLock latching locks the display in place without tools. Each interface has a sliding flag for added security. Lateral shift helps center the screen, and a cable stand plus bottom pull-out simplify connections. Landscape...

The Chief LVM2X2U builds a four-screen video wall without needing a wall. Its freestanding Fusion frame holds a 2-wide by 2-high landscape array and aligns each display with independent height, plumb, and lateral shift adjustment, with up to 0.75" (19 mm) of micro height and plumb correction per screen, so seams stay tight on narrow-bezel panels. Integrated cable management keeps wiring organized behind the screens, and optional Fusion Universal Back Covers dress the rear for open-floor...

The Chief LVM2X2UP is a mobile video wall cart that arranges four displays in portrait, two wide and two high, for a tall, striking presentation. Each screen is aligned with independent height, plumb, and lateral shift adjustment, with up to 0.75" (19 mm) of micro height and plumb correction per screen. Smooth-rolling casters, with one locking caster per leg, let the wall move between event spaces, and Chief FCA776 leveling feet can be added for longer-term installs. Integrated cable...

The Chief LVM3X1UP sets three portrait displays side by side on a mobile Fusion frame, creating a wide, poster-style video wall that can roll where it is needed. Each screen is aligned with independent height, plumb, and lateral shift adjustment, with up to 0.75" (19 mm) of micro height and plumb correction per screen for clean seams. One locking caster per leg holds the cart in place, and optional FCA776 leveling feet convert it for longer-term use. Integrated cable management keeps the...

The Chief LVM3X2U is a six-screen mobile video wall: three landscape displays across and two high on a freestanding Fusion cart. Each display is aligned with independent height, plumb, and lateral shift adjustment, with up to 0.75" (19 mm) of micro height and plumb correction per screen, giving tight seams on narrow-bezel panels. Locking casters on every leg let the wall move between spaces, and optional FCA776 leveling feet suit longer installations. Integrated cable management and...

The Chief LVM3X2UP is a Fusion freestanding video wall cart that lets you build a 6-screen, 3x2 portrait video wall without touching a wall or ceiling. It is sized for 42-46" flat panels, and Chief notes larger displays can be fitted with FCAX brackets once compatibility is confirmed in MountFinder. Each screen gets independent micro-adjustment for height, plumb and lateral shift, so bezels can be lined up tightly after the displays are hung. Casters let the whole wall roll into position, with...

The Chief LVM3X3U is a Fusion freestanding video wall cart that lets you build a 9-screen, 3x3 landscape video wall without touching a wall or ceiling. It is sized for 42-46" flat panels, and Chief notes larger displays can be fitted with FCAX brackets once compatibility is confirmed in MountFinder. Each screen gets independent micro-adjustment for height, plumb and lateral shift, so bezels can be lined up tightly after the displays are hung. Casters let the whole wall roll into position, with...

The Chief LVS1U is a ConnexSys video wall mount that holds a single display in landscape orientation and is designed to be repeated across a wall to build a multi-screen array. It accepts 42" - 80" displays with VESA patterns from 200 x 100mm - 700 x 400mm and supports up to 150 lbs (68 kg). Fine adjustment for height, lateral shift and extension lets installers line up seams and bring each screen flush with its neighbors, while +4° / -2.5° of tilt helps correct for wall irregularities. With a...

The Chief LVS1U-G is a ConnexSys video wall mount that holds a single display in landscape orientation and is designed to be repeated across a wall to build a multi-screen array. It accepts 42" - 80" displays with VESA patterns from 200 x 100mm - 700 x 400mm and supports up to 150 lbs (68 kg). Fine adjustment for height, lateral shift and extension lets installers line up seams and bring each screen flush with its neighbors, while +4° / -2.5° of tilt helps correct for wall irregularities. With...

The Chief LVS1UP is a ConnexSys video wall mount that holds a single display in portrait orientation and is designed to be repeated across a wall to build a multi-screen array. It accepts 40" - 80" displays with VESA patterns from 200 x 100mm - 800 x 400mm and supports up to 150 lbs (68 kg). Fine adjustment for height, lateral shift and extension lets installers line up seams and bring each screen flush with its neighbors, while +4° / -2.5° of tilt helps correct for wall irregularities. With a...

The Chief LVSXU is a ConnexSys video wall mount that holds a single display in landscape orientation and is designed to be repeated across a wall to build a multi-screen array. It accepts 42" - 80" displays with VESA patterns from 200 x 100mm - 700 x 400mm and supports up to 150 lbs (68 kg). Fine adjustment for height, lateral shift and extension lets installers line up seams and bring each screen flush with its neighbors, while +4° / -2.5° of tilt helps correct for wall irregularities. With a...

The Chief LVSXUP is a ConnexSys video wall mount that holds a single display in portrait orientation and is designed to be repeated across a wall to build a multi-screen array. It accepts 40" - 80" displays with VESA patterns from 200 x 100mm - 800 x 400mm and supports up to 150 lbs (68 kg). Fine adjustment for height, lateral shift and extension lets installers line up seams and bring each screen flush with its neighbors, while +4° / -2.5° of tilt helps correct for wall irregularities. With a...

The Chief LW43UB is an Impact on-wall kiosk that turns a standard 43" commercial display into a finished, enclosed digital sign in landscape orientation. Its exterior frame adjusts in depth from 3 to 5 inches (76-127 mm), so it can be matched to a variety of display models up to 3.4 in (86.4 mm) thick. When the enclosure is opened the display stays mounted to the frame, and reversible hinges let you swing it whichever way avoids nearby obstructions during install and service. The closed,...

The Chief LW43UBP is an Impact on-wall kiosk that turns a standard 43" commercial display into a finished, enclosed digital sign in portrait orientation. Its exterior frame adjusts in depth from 3 to 5 inches (76-127 mm), so it can be matched to a variety of display models up to 3.75 in (95.3 mm) thick. When the enclosure is opened the display stays mounted to the frame, and reversible hinges let you swing it whichever way avoids nearby obstructions during install and service. The closed,...

The Chief LW43UBPG is an Impact on-wall kiosk that turns a standard 43" commercial display into a finished, enclosed digital sign in portrait orientation. Its exterior frame adjusts in depth from 3 to 5 inches (76-127 mm), so it can be matched to a variety of display models up to 3.75 in (95.3 mm) thick. When the enclosure is opened the display stays mounted to the frame, and reversible hinges let you swing it whichever way avoids nearby obstructions during install and service. A 5/32" sheet...

The Chief LW43UW is an Impact on-wall kiosk that turns a standard 43" commercial display into a finished, enclosed digital sign in landscape orientation. Its exterior frame adjusts in depth from 3 to 5 inches (76-127 mm), so it can be matched to a variety of display models up to 3.4 in (86.4 mm) thick. When the enclosure is opened the display stays mounted to the frame, and reversible hinges let you swing it whichever way avoids nearby obstructions during install and service. The closed,...

The Chief LW43UWP is an Impact on-wall kiosk that turns a standard 43" commercial display into a finished, enclosed digital sign in portrait orientation. Its exterior frame adjusts in depth from 3 to 5 inches (76-127 mm), so it can be matched to a variety of display models up to 3.75 in (95.3 mm) thick. When the enclosure is opened the display stays mounted to the frame, and reversible hinges let you swing it whichever way avoids nearby obstructions during install and service. The closed,...

The Chief LW49UB is an Impact on-wall kiosk that turns a standard 49" commercial display into a finished, enclosed digital sign in landscape orientation. Its exterior frame adjusts in depth from 3 to 5 inches (76-127 mm), so it can be matched to a variety of display models. A scissor-arm design pulls the display 8" (203 mm) away from the wall so technicians can reach connections and media players without removing the screen. An integrated wall reveal helps keep the frame plumb on uneven walls...