Mounts & Racks

The Chief LBM3X3U is a Fusion freestanding video wall that bolts to the floor, letting you build a permanent multi-screen display where no suitable wall exists. It holds 9 displays in a 3-wide by 3-high landscape arrangement, sized for typical 42-46 in screens. Each display can be dialed in with micro-adjustment of up to 0.75 in (19 mm) for height and plumb, plus lateral shift, so seams line up cleanly across the array. Integrated cable management keeps power and signal runs hidden inside the...

The Chief LCB1U is a Fusion ceiling mount that suspends two large flat panels back to back, so a message can be seen from both directions in an aisle, concourse or open floor. Both displays hang in landscape and can be tilted to suit viewing height, with +/-3 degrees of roll adjustment to level the screens after they are installed. The mount accepts VESA patterns from 200 x 100 mm up to 616 x 400 mm and carries a 125 lb (56.7 kg) rating. The assembly measures 16.5 x 26.8 x 10.2 in (H x W x D),...

The Chief LCB1UP is the portrait version of the Fusion back-to-back ceiling mount, holding two large flat panels vertically so tall-format content can be read from either side. Portrait screens are a natural fit for menus, directories, posters and wayfinding, and this mount lets them hang from the ceiling instead of taking floor or wall space. Both displays tilt to suit the viewing angle, and +/-3 degrees of roll adjustment helps level them after installation. It supports VESA patterns from...

The Chief LCB1X2U builds a two-sided, two-high display cluster from the ceiling. Two screens stack vertically on each face of the mount, back to back, for a total of four landscape displays that can be read from both directions. It is a strong choice for concourses and open retail floors where you want more content - such as a schedule above a promotion - without adding another drop point. The kit is sized for typical 32-60 in displays with VESA patterns from 200 x 100 mm to 460 x 400 mm,...

The Chief LCB2X1U is a Fusion ceiling-mounted menu board that runs 2 landscape displays side by side on each face of the mount, back to back, for 4 screens in total. That layout lets a restaurant counter, concession stand or transit concourse show a continuous menu or information band to customers approaching from either direction. The mount is designed for typical 40-55 in screens, with a VESA range of 100-400 mm. Tilt from +5 to -20 degrees and height adjustment help aim the row toward...

The Chief LCB2X1UP is a Fusion ceiling-mounted menu board that runs 2 portrait displays side by side on each face of the mount, back to back, for 4 screens in total. That layout lets a restaurant counter, concession stand or transit concourse show a continuous menu or information band to customers approaching from either direction. The mount is designed for typical 40-55 in screens and can reach 65 in when fitted with Chief FCAX extension brackets, with a VESA range of 100-400 mm. Tilt from +5...

The Chief LCB3X1U is a Fusion ceiling-mounted menu board that runs 3 landscape displays side by side on each face of the mount, back to back, for 6 screens in total. That layout lets a restaurant counter, concession stand or transit concourse show a continuous menu or information band to customers approaching from either direction. The mount is designed for typical 40-55 in screens, with a VESA range of 100-400 mm. Tilt from +5 to -20 degrees and height adjustment help aim the row toward...

The Chief LCB3X1UP is a Fusion ceiling-mounted menu board that runs 3 portrait displays side by side on each face of the mount, back to back, for 6 screens in total. That layout lets a restaurant counter, concession stand or transit concourse show a continuous menu or information band to customers approaching from either direction. The mount is designed for typical 40-55 in screens and can reach 65 in when fitted with Chief FCAX extension brackets, with a VESA range of 100-400 mm. Tilt from +5...

The Chief LCDCP is the ceiling plate used to build a custom projector stacker from Chief components. It anchors the stack to the ceiling structure and accepts extension columns up to 6 ft (1.8 m) long, onto which stacker arms such as the Chief LCDPA are attached to hold multiple projectors in alignment. Stacking projectors is a common way to increase brightness or provide redundancy for large-venue and rental/staging images, and a rigid plate is the foundation of an accurate stack. The LCDCP...

The Chief LCDPA is a stacker arm that lets you hang multiple projectors from one column in a custom stacking system. Each arm clamps to an extension column and provides the attachment point for a Chief Elite or RPA Elite projector mount, so you can add one arm per projector and space them as needed. Stacked projectors are widely used to boost brightness, overlay images or provide a hot backup in large rooms and live events. The LCDPA supports up to 50 lb (22.7 kg), offers independent roll,...

The Chief LCM1U is a Fusion ceiling mount for hanging one large flat panel in landscape where wall space is limited or a display needs to face an open area. It is designed for typical 42-75 in screens. Tilt from +5 to -20 degrees angles the screen down toward viewers, and 3 degrees of roll adjustment levels the image after installation. The mount accepts VESA patterns from 200 x 100mm - 616 x 400mm and carries up to 125 lb (56.7 kg). It is also the building block for several Chief Fusion...

The Chief LCM1U-G is a Fusion ceiling mount for hanging one large flat panel in landscape where wall space is limited or a display needs to face an open area. This is the TAA-compliant version of the LCM1U, intended for government and other projects that require TAA-sourced hardware. Tilt from +5 to -20 degrees angles the screen down toward viewers, and 3 degrees of roll adjustment levels the image after installation. The mount accepts VESA patterns from 200 x 200mm - 616 x 400mm and carries...

The Chief LCM1UP is the portrait version of the Fusion large ceiling mount, holding one flat panel vertically for tall-format content like menus, directories, posters and wayfinding. Suspending a portrait screen from the ceiling keeps it visible above crowds and frees floor and wall space. The display tilts from +5 to -20 degrees to aim content toward viewers, and 3 degrees of roll adjustment squares up the screen after installation. The mount accepts VESA patterns from 200 x 100 mm up to 460...

The Chief LCM1X2U is a Fusion ceiling-mounted stacker that hangs two landscape displays one above the other from a single ceiling point. A vertical pair is a simple way to double the information on show - for example flight times above gate notices, or a scoreboard above a promotion - without adding another drop. The kit is sized for typical 40-55 in screens with VESA patterns from 200 x 100 mm to 616 x 400 mm, provides tilt adjustment to aim the pair toward viewers and carries a 125 lb (56.7...

The Chief LCM2X1U is a Fusion ceiling-mounted menu board that hangs two displays side by side in landscape, creating a continuous band of content above a counter or service area. The landscape layout gives a wide canvas for menus, pricing and promotions. The display interfaces accept VESA Any width x 100 - 400mm. It is sized for typical 40-55 in screens and carries a 125 lb (56.7 kg) rating. Tilt from +5 to -20 degrees and height adjustment let you aim the row down toward customers, while +/-3...

The Chief LCM2X1UP is a Fusion ceiling-mounted menu board that hangs two displays side by side in portrait, creating a continuous band of content above a counter or service area. The portrait layout is ideal for tall menu panels, product posters and directory listings. The display interfaces accept VESA 100 - 800mm x Any Height. It is sized for typical 40-55 in screens and carries a 125 lb (56.7 kg) rating. Tilt from +5 to -20 degrees and height adjustment let you aim the row down toward...

The Chief LCM2X1UP400 is a Fusion ceiling-mounted menu board that hangs two displays side by side in portrait, creating a continuous band of content above a counter or service area. The portrait layout is ideal for tall menu panels, product posters and directory listings. This version is built with 400 mm interfaces, accepting VESA 100 - 400mm. It is sized for typical 40-55 in screens and carries a 125 lb (56.7 kg) rating. Tilt from +5 to -20 degrees and height adjustment let you aim the row...

The Chief LCM2X2U lets you build a 2x2 landscape video wall where there is no wall to hang it on, suspending four displays from the ceiling in a tight, aligned grid. It is well suited to lobbies, atriums and open retail spaces that call for a large digital signage canvas. Each screen can be fine-tuned with independent knobs for height and plumb - no tools needed - with plumb micro-adjustment up to 0.75 in (19 mm), and Chief's ControlZone leveling adds height and level adjustment at every...

The Chief LCM2X2UP lets you build a 2x2 portrait video wall where there is no wall to hang it on, suspending four displays from the ceiling in a tight, aligned grid. It is well suited to lobbies, atriums and open retail spaces that call for a large digital signage canvas. Each screen can be fine-tuned with independent knobs for height and plumb - no tools needed - with plumb micro-adjustment up to 0.75 in (19 mm), and Chief's ControlZone leveling adds height and level adjustment at every...

The Chief LCM3U turns a single ceiling drop into a three-sided display hub. Three Fusion display interfaces are arranged around a central hub so screens face outward in different directions, letting viewers anywhere in a concourse, bar, or lobby see content without a second column. Each interface uses Centris fingertip tilt with four set locking points, so every screen in the cluster can be dialed to the identical angle. Displays hang on and lift off without tools for straightforward...

The Chief LCM3X1U creates a three-wide digital menu board suspended from the ceiling, ideal where there is no usable wall behind the counter. A horizontal Fusion frame carries three landscape displays in a single row, and each screen can be tilted from +5° to -20° so the menu faces down toward the queue. Height can be fine-tuned up to 2" at the structural intersection points, helping installers line up bezels into a clean, continuous row. The universal interface accepts a wide range of...

The Chief LCM3X1UM is a modular take on the Fusion ceiling menu board, built for restaurants, delis, and campus dining that need clean, aligned digital menus overhead. A horizontal extrusion with depth adjustment keeps all three screens in one plane even when the structure above is uneven, and there is room to reach behind the displays for service. Each display interface tilts for viewing angle and offers +/-3° micro roll for leveling, and screens engage without tools. Modular components ship...

The Chief LCM3X1UP is the portrait version of Chief's ceiling menu board frame, supporting three displays turned on end in a single row. Portrait screens are well suited to tall menu layouts and promotional content, and suspending them from the ceiling frees the wall behind a counter. Each display tilts from +5° to -20° toward the line, and up to 2" of micro height adjustment at the structural intersections helps keep bezels in a tight, even row. The universal interface handles...

The Chief LCM3X2U lets you build a six-screen video wall where no wall exists, hanging a 3-wide by 2-high landscape array from the ceiling structure. Displays are aligned with independent height and plumb knobs, ControlZone micro leveling at every column intersection, and infinite vertical and lateral positioning, giving installers the control needed for narrow-bezel seams. Height is set in 1" increments at the structural intersections with an additional 2" of micro-adjustment, and...