Mounts & Racks

The Chief KWGSK110B is a height-adjustable wall arm from Chief's Kontour wall lift range, built for metal (steel) stud walls. A height-assist mechanism lets the user move the monitor up or down through 13.25 inches (336.55 mm) of travel and have it stay put, so seated and standing users can share the same station. Along with height, the arm offers extension, swivel and tilt, and it folds back to a minimum depth of 2.85 in (7.2 cm). Chief rates it for displays from 5 - 25 lbs (2.3 - 11.3 kg);...

The Chief KWGSK110S is a height-adjustable wall arm from Chief's Kontour wall lift range, built for metal (steel) stud walls. A height-assist mechanism lets the user move the monitor up or down through 13.25 inches (336.55 mm) of travel and have it stay put, so seated and standing users can share the same station. Along with height, the arm offers extension, swivel and tilt, and it folds back to a minimum depth of 2.85 in (7.2 cm). Chief rates it for displays from 5 - 25 lbs (2.3 - 11.3 kg);...

The Chief KWK110B is a height-adjustable keyboard and mouse tray for wall-mounted workstations. It lets the user raise or lower the keyboard through 13.25 inches (336.55 mm) of travel to find a comfortable typing height, whether sitting or standing. Swing-out mouse pad trays on both sides suit right- and left-handed users, and the tray tilts from +90 degrees to -5 degrees, so it can be angled for typing or folded up out of the way. It carries up to 10 lbs (4.5 kg) and has a minimum depth of...

The Chief KWP110B is a compact pivot/tilt wall mount from the Kontour family, built to hold a single flat panel monitor close to the wall while still letting the user angle it where they need it. Swivel and tilt motion makes it easy to cut glare or share the screen with someone beside you, and the display can be set in either landscape or portrait. Once the monitor is hung, a post-installation leveling adjustment lets you square up the screen without taking it back down. The mount sits as...

The Chief KWP110S is a compact pivot/tilt wall mount from the Kontour family, built to hold a single flat panel monitor close to the wall while still letting the user angle it where they need it. Swivel and tilt motion makes it easy to cut glare or share the screen with someone beside you, and the display can be set in either landscape or portrait. Once the monitor is hung, a post-installation leveling adjustment lets you square up the screen without taking it back down. The mount sits as...

The Chief KWP130B adds height adjustment to the Kontour pivot/tilt wall mount concept, so a single monitor can be set at the right eye level for whoever is using it. It provides 4.8 in (121.9 mm) of manual height travel along with extension, swivel and tilt, and the screen can run in landscape or portrait. A post-installation leveling adjustment helps square the image after the display is hung. The mount itself is compact at 8.5 x 4.6 x 5.6 in (215 x 116 x 142 mm) with a 5.6 in (14.2 cm)...

The Chief KWS220B puts a dual-monitor array on a single articulating wall arm, freeing up the desk while keeping both screens movable as one unit. The two displays sit side by side in a 2x1 arrangement, and the arm provides extension, swivel and tilt so the pair can be pulled forward, angled toward a colleague or pushed back toward the wall. Displays can run landscape or portrait, and post-installation leveling makes it easier to line up the array once both monitors are hung. Folded in, the...

The Chief KWT110B turns a bare section of wall into a complete sit-or-stand computer station. The kit combines a height-adjustable monitor mount, a height-adjustable flip-up keyboard tray, a CPU mount and an adjustable wall extrusion that ties everything together, so multiple users can reset the setup to their own height in seconds. The monitor travels through 13.25 in (336.55 mm) of dynamic height adjustment with a height-assist mechanism, and it also extends, swivels and tilts in landscape...

The Chief KXC220B is a Kontour KX column desk mount that holds 2 monitors on a single post, keeping the work surface clear while each screen stays fully adjustable. Every display rides on its own 2-link articulating arm in a 2x1 array, with dynamic height adjustment over 13 in (330.2 mm), up to 22.5 in (57.2 cm) of reach and swivel motion for pulling a screen in or turning it to share. Tilt ranges from +75 to -10 degrees, so a monitor can be angled steeply for standing work or reading...

The Chief KXC220S is a Kontour KX column desk mount that holds 2 monitors on a single post, keeping the work surface clear while each screen stays fully adjustable. Every display rides on its own 2-link articulating arm in a 2x1 array, with dynamic height adjustment over 13 in (330.2 mm), up to 22.5 in (57.2 cm) of reach and swivel motion for pulling a screen in or turning it to share. Tilt ranges from +75 to -10 degrees, so a monitor can be angled steeply for standing work or reading...

The Chief KXC330B is a Kontour KX column desk mount that holds 3 monitors on a single post, keeping the work surface clear while each screen stays fully adjustable. Every display rides on its own 3-link articulating arm, with dynamic height adjustment over 13 in (330.2 mm), up to 22.5 in (57.2 cm) of reach and swivel motion for pulling a screen in or turning it to share. Tilt ranges from +75 to -10 degrees, so a monitor can be angled steeply for standing work or reading positions, and each...

The Chief KXC330S is a Kontour KX column desk mount that holds 3 monitors on a single post, keeping the work surface clear while each screen stays fully adjustable. Every display rides on its own 3-link articulating arm, with dynamic height adjustment over 13 in (330.2 mm), up to 22.5 in (57.2 cm) of reach and swivel motion for pulling a screen in or turning it to share. Tilt ranges from +75 to -10 degrees, so a monitor can be angled steeply for standing work or reading positions, and each...

The Chief KXC420B is a Kontour KX column desk mount that holds 4 monitors on a single post, keeping the work surface clear while each screen stays fully adjustable. Every display rides on its own 2-link articulating arm, with dynamic height adjustment over 13 in (330.2 mm), up to 22.5 in (57.2 cm) of reach and swivel motion for pulling a screen in or turning it to share. Tilt ranges from +75 to -10 degrees, so a monitor can be angled steeply for standing work or reading positions, and each...

The Chief KXC420S is a Kontour KX column desk mount that holds 4 monitors on a single post, keeping the work surface clear while each screen stays fully adjustable. Every display rides on its own 2-link articulating arm, with dynamic height adjustment over 13 in (330.2 mm), up to 22.5 in (57.2 cm) of reach and swivel motion for pulling a screen in or turning it to share. Tilt ranges from +75 to -10 degrees, so a monitor can be angled steeply for standing work or reading positions, and each...

The Chief KXD220B is a dual-monitor desk mount from the premium Kontour KX line, designed to give two screens a wide range of motion while keeping the install shallow on narrow desks. Each arm carries a 10-32 in monitor weighing 5-25 lb (2.3-11.3 kg) and offers 13 in (330.2 mm) of dynamic height adjustment, up to 20.6 in (52.3 cm) of extension and swivel motion for turning a display toward a colleague. Chief's extreme tilt technology allows the screen to be angled from +75 to -10 degrees with...

The Chief KXD220S is a dual-monitor desk mount from the premium Kontour KX line, designed to give two screens a wide range of motion while keeping the install shallow on narrow desks. Each arm carries a 10-32 in monitor weighing 5-25 lb (2.3-11.3 kg) and offers 13 in (330.2 mm) of dynamic height adjustment, up to 20.6 in (52.3 cm) of extension and swivel motion for turning a display toward a colleague. Chief's extreme tilt technology allows the screen to be angled from +75 to -10 degrees with...

The Chief LBM1X2U is a Fusion freestanding video wall that bolts to the floor, letting you build a permanent multi-screen display where no suitable wall exists. It holds 2 displays in a 1-wide by 2-high landscape arrangement, sized for typical 42-80 in screens. Each display can be dialed in with micro-adjustment of up to 0.75 in (19 mm) for height and plumb, plus lateral shift, so seams line up cleanly across the array. Integrated cable management keeps power and signal runs hidden inside the...

The Chief LBM1X2UP is a Fusion freestanding video wall that bolts to the floor, letting you build a permanent multi-screen display where no suitable wall exists. It holds 2 displays in a 1-wide by 2-high portrait arrangement, sized for typical 42-80 in screens. Each display can be dialed in with micro-adjustment of up to 0.75 in (19 mm) for height and plumb, plus lateral shift, so seams line up cleanly across the array. Integrated cable management keeps power and signal runs hidden inside the...

The Chief LBM1X3U is a Fusion freestanding video wall that bolts to the floor, letting you build a permanent multi-screen display where no suitable wall exists. It holds 3 displays in a 1-wide by 3-high landscape arrangement, sized for typical 42-65 in screens. Each display can be dialed in with micro-adjustment of up to 0.75 in (19 mm) for height and plumb, plus lateral shift, so seams line up cleanly across the array. Integrated cable management keeps power and signal runs hidden inside the...

The Chief LBM2X2U is a Fusion freestanding video wall that bolts to the floor, letting you build a permanent multi-screen display where no suitable wall exists. It holds 4 displays in a 2-wide by 2-high landscape arrangement, sized for typical 42-50 in screens. Each display can be dialed in with micro-adjustment of up to 0.75 in (19 mm) for height and plumb, plus lateral shift, so seams line up cleanly across the array. Integrated cable management keeps power and signal runs hidden inside the...

The Chief LBM2X2UP is a Fusion freestanding video wall that bolts to the floor, letting you build a permanent multi-screen display where no suitable wall exists. It holds 4 displays in a 2-wide by 2-high portrait arrangement, sized for typical 42-50 in screens. Each display can be dialed in with micro-adjustment of up to 0.75 in (19 mm) for height and plumb, plus lateral shift, so seams line up cleanly across the array. Integrated cable management keeps power and signal runs hidden inside the...

The Chief LBM3X1UP is a Fusion freestanding video wall that bolts to the floor, letting you build a permanent multi-screen display where no suitable wall exists. It holds 3 displays in a 3-wide by 1-high portrait arrangement, sized for typical 42-46 in screens. Each display can be dialed in with micro-adjustment of up to 0.75 in (19 mm) for height and plumb, plus lateral shift, so seams line up cleanly across the array. Integrated cable management keeps power and signal runs hidden inside the...

The Chief LBM3X2U is a Fusion freestanding video wall that bolts to the floor, letting you build a permanent multi-screen display where no suitable wall exists. It holds 6 displays in a 3-wide by 2-high landscape arrangement, sized for typical 42-46 in screens. Each display can be dialed in with micro-adjustment of up to 0.75 in (19 mm) for height and plumb, plus lateral shift, so seams line up cleanly across the array. Integrated cable management keeps power and signal runs hidden inside the...

The Chief LBM3X2UP is a Fusion freestanding video wall that bolts to the floor, letting you build a permanent multi-screen display where no suitable wall exists. It holds 6 displays in a 3-wide by 2-high portrait arrangement, sized for typical 42-46 in screens. Each display can be dialed in with micro-adjustment of up to 0.75 in (19 mm) for height and plumb, plus lateral shift, so seams line up cleanly across the array. Integrated cable management keeps power and signal runs hidden inside the...