Mounts & Racks

The Chief LCM3X2UP builds a tall, portrait-format video wall from the ceiling: three displays across and two high, each turned on end. It is a strong fit for storefront windows and atriums where vertical content is the goal and walls are glass or absent. Alignment uses independent height and plumb knobs, ControlZone micro leveling at every column intersection, and infinite vertical and lateral positioning, so seams stay tight. Height sets in 1" structural increments with 2" of micro...

The Chief LCM3X3U is the largest single frame in the Fusion ceiling video wall family, hanging a nine-display 3 x 3 landscape wall from overhead structure. It makes large-format signage possible in atriums and open lobbies where there is no wall to build on. Each screen is aligned with independent height and plumb knobs, ControlZone micro leveling at every column intersection, and infinite vertical and lateral positioning. Height is set in 1" increments at the structural intersections...

The Chief LCM4U is a four-way ceiling display cluster that puts a screen on every side of a single column drop. Built on Fusion interface hardware, each of the four arms carries a landscape display with Centris fingertip tilt and four set lock points, so all screens can be matched to the same angle quickly. Displays hook on and off without tools, which keeps installation and later service simple, and the hub rotates to orient the array in the room. The assembly measures 18.7" H x 56"...

The Chief LDB1U is a large-format Fusion table stand designed to be bolted down, giving a display on a desk, credenza, or counter a permanent, tamper-resistant base. It accepts 46"-70" screens weighing up to 125 lbs and swivels so the image can be turned toward the audience. The display height can be set anywhere within a 22"-38" range to suit the furniture and sightlines. Bolting the stand to the surface makes it a strong choice for public and high-traffic locations where...

The Chief LDS1U is a freestanding Fusion table stand that sets a large display on a desk, credenza, or table without drilling. Its weighted base supports 46"-70" screens up to 125 lbs, and the column lets the display sit anywhere in a 22"-38" height range. A swivel adjustment turns the screen toward the audience, making it easy to reposition for different seating layouts. With TAA compliance and UL listing, it is a practical choice for government, education, and corporate...

The Chief LF43UBP is a 43" Impact portrait floor kiosk in black. Impact floor kiosks enclose a portrait display in a clean, fastener-free cabinet for open floor areas. The front opens for full service access while the display stays attached to the frame, and keyed locks protect the screen and media player. Inside, a universal AV storage plate, tool-free removable storage panels, knockouts for an electrical box and 2RU of rack space, and external cable pathway knockouts make it easy to...

The Chief LF50UBP is a 50" Impact portrait floor kiosk in black. Impact floor kiosks enclose a portrait display in a clean, fastener-free cabinet for open floor areas. The front opens for full service access while the display stays attached to the frame, and keyed locks protect the screen and media player. Inside, a universal AV storage plate, tool-free removable storage panels, knockouts for an electrical box and 2RU of rack space, and external cable pathway knockouts make it easy to...

The Chief LF55UBP is a 55" Impact portrait floor kiosk in black. Impact floor kiosks enclose a portrait display in a clean, fastener-free cabinet for open floor areas. The front opens for full service access while the display stays attached to the frame, and keyed locks protect the screen and media player. Inside, a universal AV storage plate, tool-free removable storage panels, knockouts for an electrical box and 2RU of rack space, and external cable pathway knockouts make it easy to...

The Chief LF55UBP-B2B is a 55" Impact back-to-back portrait floor kiosk in black. Impact floor kiosks enclose a portrait display in a clean, fastener-free cabinet for open floor areas. The front opens for full service access while the display stays attached to the frame, and keyed locks protect the screen and media player. Inside, a universal AV storage plate, tool-free removable storage panels, knockouts for an electrical box and 2RU of rack space, and external cable pathway knockouts...

The Chief LF55UWP is a 55" Impact portrait floor kiosk in white. Impact floor kiosks enclose a portrait display in a clean, fastener-free cabinet for open floor areas. The front opens for full service access while the display stays attached to the frame, and keyed locks protect the screen and media player. Inside, a universal AV storage plate, tool-free removable storage panels, knockouts for an electrical box and 2RU of rack space, and external cable pathway knockouts make it easy to...

The Chief LF55UWP-B2B is a 55" Impact back-to-back portrait floor kiosk in white. Impact floor kiosks enclose a portrait display in a clean, fastener-free cabinet for open floor areas. The front opens for full service access while the display stays attached to the frame, and keyed locks protect the screen and media player. Inside, a universal AV storage plate, tool-free removable storage panels, knockouts for an electrical box and 2RU of rack space, and external cable pathway knockouts...

The Chief LFAUB is a large Fusion floor stand in black that supports a single 42"-86" display weighing up to 200 lbs. It is the stationary counterpart to the LPAU mobile cart, giving rooms a freestanding display without wall work. Height is set manually, while the Fusion interface adds +/-5° of tilt and roll leveling after the display is hung so the image sits perfectly level. Shelves, CPU holders, and Fusion Universal Back Covers are available separately to build out the stand. At a...

The Chief LFD1U carries a large display on a floor-supported column with a counterbalanced lift, so the screen can be raised or lowered 15.75" with light effort. Because the load is carried to the floor, it works where walls cannot take a heavy display, while keeping a slim 6.3" profile. The height-assist mechanism is tuned for displays in the 122-180 lb range, making it well suited to interactive flat panels that need to move between standing and seated or child and adult heights....

The Chief LFE1U is a motorized floor support for large flat panels and interactive displays. A built-in electric lift moves the screen through 26" of vertical travel at the push of a button, letting one display serve standing presenters, seated users, and wheelchair users alike. It carries up to 200 lbs and accepts mounting patterns up to 860 x 510 mm, covering many of today's largest interactive panels. A tilt adjustment fine-tunes the viewing angle, and the floor-based design...

The Chief LPAUB is a large Fusion mobile AV cart in black that supports a single 42"-86" display weighing up to 200 lbs. Rounded edges and a clean profile suit corporate and classroom settings, and the cart rolls easily between rooms. Height is set manually by one person, either by hand or with a 1/2" hex bit on a power drill, while the Fusion interface adds +/-5° of tilt and roll leveling after the display is hung so the image sits perfectly level. Shelves, CPU holders, and...

The Chief LPAUS is a large Fusion mobile AV cart in silver that supports a single 42"-86" display weighing up to 200 lbs. Rounded edges and a clean profile suit corporate and classroom settings, and the cart rolls easily between rooms. Height is set manually by one person, either by hand or with a 1/2" hex bit on a power drill, while the Fusion interface adds +/-5° of tilt and roll leveling after the display is hung so the image sits perfectly level. Shelves, CPU holders, and...

The Chief LPE1U combines a motorized lift with a mobile base, so a large interactive or flat panel display can move between rooms and adjust its height at the push of a button. The electric column provides 26" of vertical travel, accommodating standing presenters, seated participants, and wheelchair users with the same screen. It carries displays up to 200 lbs with mounting patterns up to 860 x 510 mm, and a tilt adjustment sets the viewing angle. It is the mobile counterpart to the LFE1U...

The Chief LPK1 is a mounting accessory, not a complete mount: it lets a Chief VCM-series projector mount attach directly to the ceiling surface instead of hanging from a column or pipe. Fastened to the top of the VCM, the kit keeps the projector as close to the ceiling as possible while preserving the mount's X-Y movement for lining up the image. The plate measures 15.5" x 9.4" and only 0.7" deep, making it a tidy solution for low ceilings and rooms where minimal projector...

The Chief LSA1U is a large Fusion fixed wall mount that keeps big displays close to the wall with a 2" profile. It carries 42"-86" screens up to 200 lbs and supports mounting patterns up to 870 x 500 mm. Lateral shift lets installers slide the display left or right after hanging to center it on the wall regardless of stud placement, and the wall plate spans studs from 16" to 32" on center. OSHPD approval makes it suitable for healthcare projects in seismic...

The Chief LSB100 is a lateral shift bracket that sits between a Chief RPA-series projector mount and the projector, letting the installer slide the projector left or right to put the lens on the screen's centerline without moving the ceiling hardware. It offers two shift ranges, 0-3" or 3-5.25", and preserves the mount's quick-disconnect feature and All-Points Security. At only 0.8" thick, it adds minimal drop. For RPM Elite mounts with Q-Lock, choose the LSB101. At a...

The Chief LSB101 lets you fine-position a projector after the mount is installed. It fits between a Chief RPMA or RPM Elite projector mount and the projector, adding up to 3" of side-to-side or front-to-back travel so the lens can be centered or the throw distance trimmed. The bracket maintains the mount's quick-disconnect feature and All-Points Security, and is compatible with the RPM Elite Q-Lock integrated security system. It measures just 0.9" thick. At a glance: weight...

The Chief LSCUB Voyager is a large mobile AV cart in black built for interactive displays and big-screen collaboration. It supports 50"-85" displays weighing up to 175 lbs and lets the center of the screen be set manually anywhere from 50.72" to 60.96" above the floor. A Wilsonart Veranda Teak finish adds a warm, furniture-grade accent that fits modern offices and learning spaces. With a 34.8" wide by 33" deep footprint, it rolls a large touch display from room to...

The Chief LSCUW Voyager is a large mobile AV cart in white built for interactive displays and big-screen collaboration. It supports 50"-85" displays weighing up to 175 lbs and lets the center of the screen be set manually anywhere from 50.72" to 60.96" above the floor. A Wilsonart Veranda Teak finish adds a warm, furniture-grade accent that fits modern offices and learning spaces. With a 34.8" wide by 33" deep footprint, it rolls a large touch display from room to...

The Chief LSD1U mounts a large display on the wall with a counterbalanced lift, so users can glide the screen up or down 15.75" by hand. It is tuned for displays weighing 122-175 lbs, a range that covers many interactive flat panels used in classrooms and collaboration rooms. Moving the display lets teachers, students, and wheelchair users all reach the touch surface. Micro-adjustment provides precise leveling, and the mount stays a slim 5.1" from the wall. At a glance: weight...