Accessories

The QSC SL-DAN-8-P is a Q-SYS Software-based Dante license that adds 8 x 8 (8 in, 8 out) bidirectional Dante network audio channels to a compatible Q-SYS Core without any additional hardware. It is a software/feature license, not a physical device, and is delivered and activated through the Q-SYS licensing system.Key FeaturesAdds 8 x 8 Dante audio channels to a Q-SYS CoreSoftware-based—no I/O cards or extra hardware requiredPerpetual, node-locked license tied to a specific CoreLets...

The QSC SL-QSE-510-P is a Q-SYS Scripting Engine feature license for the Core 510i processor. It is a software license rather than a physical product, unlocking the Q-SYS Scripting Engine so integrators can run Lua-based custom logic, integrations and automation on that Core. It is activated through the Q-SYS licensing system.Key FeaturesEnables the Q-SYS Scripting Engine on a Core 510iSupports Lua-based custom control and automation logicPerpetual license tied to the specified Core...

The QSC SL-QUD-510-P is a Q-SYS UCI Deployment feature license for the Core 510i processor. It is a software license, not a physical product, that unlocks the deployment of User Control Interfaces (UCIs) to compatible Q-SYS control devices from that Core. It is delivered and activated through the Q-SYS licensing system.Key FeaturesEnables UCI (User Control Interface) deployment from a Core 510iPerpetual license tied to the specified Core modelSoftware feature license—no hardware...

The Sonos 10W USB-A Power Adapter is the factory wall plug for charging Sonos Roam and Roam SL at full speed. Pair it with a USB-A to USB-C cable or the Sonos Roam Wireless Charger and the speaker draws the 5V, 2A power Sonos specifies, avoiding the slow charging and low-power warnings that weaker phone chargers can cause. This version comes in Shadow Black.It is a handy spare for travel, a second charging spot in another room, or a replacement for a lost adapter, and a tidy option for hotels,...

The Sonos 10W USB-A Power Adapter is the factory wall plug for charging Sonos Roam and Roam SL at full speed. Pair it with a USB-A to USB-C cable or the Sonos Roam Wireless Charger and the speaker draws the 5V, 2A power Sonos specifies, avoiding the slow charging and low-power warnings that weaker phone chargers can cause. This version comes in White.It is a handy spare for travel, a second charging spot in another room, or a replacement for a lost adapter, and a tidy option for hotels,...

The Sonos Amp Multi Rack Mount converts a 1.5U Amp Multi into a 2U, full-width 19-inch rack component. Amp Multi's flat back slides onto the mount, and the single-piece metal design leaves a quarter rack unit of open space above and below each amplifier for convection cooling, so vent panels between units are not needed.It is designed for custom integrators building equipment racks for whole-home audio and for commercial installs in restaurants, retail, offices and hospitality venues where...

The Sonos Angled Power Cable in black is the official replacement cord for Sonos One, One SL and Play:1, three of the most widely installed compact Sonos speakers. Its angled connector exits the back of the speaker at a right angle, so the speaker can sit closer to a wall, slide into a tight bookshelf or corner, or hang on a wall mount without a stiff cable pushing it forward. This standard 6 ft (2 m) version matches the length Sonos ships in the box, making it the right part for replacing a...

The Sonos Angled Power Cable in white is the official replacement cord for Sonos One, One SL and Play:1, three of the most widely installed compact Sonos speakers. Its angled connector exits the back of the speaker at a right angle, so the speaker can sit closer to a wall, slide into a tight bookshelf or corner, or hang on a wall mount without a stiff cable pushing it forward. This standard 6 ft (2 m) version matches the length Sonos ships in the box, making it the right part for replacing a...

The Sonos Arc and Arc Ultra Wall Mount is the factory-designed bracket for hanging a Sonos Arc Ultra or original Arc soundbar directly beneath or above a wall-mounted TV. It keeps the soundbar tucked as close to the wall as possible, so the bar reads as part of the screen rather than a separate box on a shelf. It suits living rooms, media rooms, conference rooms and hotel suites with wall-hung TVs.Arc Ultra recognizes when it is wall mounted and automatically adjusts its EQ to tame the extra...

The Medium Round Flex Bracket is a pre-drywall mounting frame for round in-ceiling speakers in the Sonos Architectural by Sonance family. Installers fasten it to the framing during rough-in, which marks the speaker location, keeps the cutout clean and gives the speaker's mounting clamps a solid surface to grab once the ceiling is finished. This part number is a five-pack, sized for multi-room projects.It is aimed at AV integrators, electricians and builders wiring new homes, additions and...

The Medium Round Retrofit Enclosure is a back box that fits behind a round in-ceiling speaker from the Sonos Architectural by Sonance line. It slips up through the speaker cutout in a finished ceiling, so it can be added during a retrofit without attic access or opening the drywall. Once installed, it contains the speaker's rear output, keeping music in the room where it belongs.It is a smart addition for homes with bedrooms or offices above a living area, and for hospitality, office and...

These Sonos Banana Plugs (one pair) are the custom connectors Sonos makes for terminating speaker wire and connecting passive, wired speakers to Sonos Amp. They give you a secure, repeatable connection that plugs straight into the Amp's speaker terminals, so installs look neater and speakers can be disconnected and reconnected without re-stripping wire.Integrators use them to finish bookshelf, in-wall, in-ceiling and outdoor speaker runs in homes, restaurants, retail spaces and offices, and to...

These Sonos Banana Plugs (a 10-pack, 5 pairs) are the custom connectors Sonos makes for terminating speaker wire and connecting passive, wired speakers to Sonos Amp. They give you a secure, repeatable connection that plugs straight into the Amp's speaker terminals, so installs look neater and speakers can be disconnected and reconnected without re-stripping wire.Integrators use them to finish bookshelf, in-wall, in-ceiling and outdoor speaker runs in homes, restaurants, retail spaces and...

The Sonos Beam Ultra Wall Mount is a purpose-built bracket that holds Beam Ultra close to the wall directly under a mounted TV. Engineered specifically for Beam Ultra, it keeps the soundbar steady without rattling or shifting at high volume, and its slim profile disappears behind the bar so the installation looks clean from every angle.It is the right choice for homeowners mounting a TV in a living room or bedroom, and for integrators finishing hotel rooms, conference rooms, offices and...

The Sonos Beam Wall Mount is the custom-made bracket Sonos designed to hang a Beam (Gen 2) or original Beam soundbar on the wall above or below a TV. Finished in black to match the soundbar, it virtually disappears behind the bar once installed, leaving a tidy, furniture-free home theater. It is a practical upgrade for apartments, bedrooms, offices, small conference rooms and hospitality rooms where the TV is wall mounted and there is no console to set the soundbar on.Because the bracket is...

The Sonos Beam Wall Mount is the custom-made bracket Sonos designed to hang a Beam (Gen 2) or original Beam soundbar on the wall above or below a TV. Finished in white to match the soundbar, it virtually disappears behind the bar once installed, leaving a tidy, furniture-free home theater. It is a practical upgrade for apartments, bedrooms, offices, small conference rooms and hospitality rooms where the TV is wall mounted and there is no console to set the soundbar on.Because the bracket is...

The Sonos Combo Adapter is a short split cable that gives compatible Sonos speakers two connections they lack on their own: a wired Ethernet port and a 3.5 mm analog line-in. Plug it into the speaker's USB-C port and you can hardwire the speaker to your router for the most stable network connection, play a turntable, CD player or other analog source through Sonos, or do both at once. The black finish matches black Sonos speakers.It is a small accessory that solves big problems for integrators,...

The Sonos Combo Adapter is a short split cable that gives compatible Sonos speakers two connections they lack on their own: a wired Ethernet port and a 3.5 mm analog line-in. Plug it into the speaker's USB-C port and you can hardwire the speaker to your router for the most stable network connection, play a turntable, CD player or other analog source through Sonos, or do both at once. The white finish matches white Sonos speakers.It is a small accessory that solves big problems for integrators,...

The Sonos Era 100 Pro Surface Mount (Pair) is the professional-grade mounting system for the PoE-powered Era 100 Pro speaker. It lets certified installers place Era 100 Pro on walls or ceilings in nearly any orientation and on almost any building material, including concrete, brick, masonry and wood. The white finish suits bright interiors and pairs with white Era 100 Pro speakers.Built for commercial and high-end residential projects, the mount combines precise aiming, flexible cable routing...

The Sonos Era 100 Pro Surface Mount is the dedicated mounting hardware for the Era 100 Pro, the Sonos speaker built for professional, PoE-powered installations. Sold as a pair, it lets an integrator hang two Era 100 Pro speakers on a wall or ceiling with a clean, repeatable aim. It is a natural fit for restaurants, retail floors, offices, hospitality lobbies and residential rooms where speakers need to be mounted securely and still look tidy.Key FeaturesTwo surface mounts and two surface...

The Sonos Era 100 Stand raises an Era 100 or Era 100 SL to ear height, freeing up shelf and furniture space and putting the speaker where it sounds its best. A weighted base keeps it steady, a screw secures the speaker to the top plate, and the power cable runs out of sight inside a channel in the pole. The black finish is matched to the speaker. This listing is for one stand.It suits living rooms and bedrooms using Era 100 as rear surrounds behind a Sonos soundbar, and commercial spaces such...

The Sonos Era 100 Stand raises an Era 100 or Era 100 SL to ear height, freeing up shelf and furniture space and putting the speaker where it sounds its best. A weighted base keeps it steady, a screw secures the speaker to the top plate, and the power cable runs out of sight inside a channel in the pole. The white finish is matched to the speaker. This listing is for one stand.It suits living rooms and bedrooms using Era 100 as rear surrounds behind a Sonos soundbar, and commercial spaces such...

The Sonos Era 100 Wall Mount (Pair) lifts Era 100 or Era 100 SL speakers off the furniture and onto the wall, freeing up surfaces and putting sound right where you want it. This package includes two mounts, perfect for a stereo pair or for surround speakers behind a Sonos soundbar. The black finish is matched to black Era 100 speakers so the mount looks like part of the product.A ball-and-socket joint lets you aim the speaker toward the listening area, while the low-profile design keeps every...

The Sonos Era 100 Wall Mount (Pair) lifts Era 100 or Era 100 SL speakers off the furniture and onto the wall, freeing up surfaces and putting sound right where you want it. This package includes two mounts, perfect for a stereo pair or for surround speakers behind a Sonos soundbar. The white finish is matched to white Era 100 speakers so the mount looks like part of the product.A ball-and-socket joint lets you aim the speaker toward the listening area, while the low-profile design keeps every...