Accessories

The Russound ADP-1.2 is a passive interface that turns a speaker-level signal into a line-level signal, letting you take the speaker output of an amplifier or receiver and feed it into the RCA inputs of a separate, more powerful amplifier. Russound designed it for the CAA66 and MCA-66 controller amplifiers, where some zones have no preamp outputs; the ADP-1.2 provides the line-level feed those zones are missing, so a zone can drive a high-power amp for larger rooms, more speakers or a...

The Russound Advanced Programming Cable links a computer to Russound devices that are configured or updated through a direct connection. Russound lists it for the KP6 and KPL system keypads used with CAA66 multiroom systems, for ComPoint intercom components, for the iBridge Dock and for the BTC-1X. The computer end is a female DB-9 serial connector and the device end is a flat pin connector that attaches to the device. It is a tool for the installer rather than an everyday user item: one cable...

The Russound ALT-126R is a stereo in-wall volume control for distributed audio systems where more speakers are connected to an amplifier than it could otherwise drive. Its autoformer steps up the impedance seen by the amplifier, so multiple rooms can be wired to one amplifier channel pair while each room keeps independent level control.The impedance setting is selected with a switch located behind the faceplate, which keeps adjustments quick during commissioning. Twelve steps (including off)...

The Russound ALT-70V-50 gives a room or zone its own volume adjustment on a commercial or residential 70-volt speaker system. It installs in a standard wall box and sits between the 70V amplifier line and the local speakers, letting occupants turn a space down without affecting the rest of the building.Eleven attenuation steps use make-before-break switching, so the signal is never momentarily interrupted as the knob turns. Wiring is handled by a removable four-pole screw-down connector that...

The Russound BSK-2 Bluetooth Source Kit packages two parts. The BTC-2X remote transceiver receives Bluetooth 5.1 audio. The BTC-2 audio hub sits with the electronics and handles power and audio connections. A single CAT5/6 cable (not included) of up to 500 feet links the two, so the receiver can go in the room where people actually use their phones while the hub stays in the rack.The hub offers stereo RCA input and output plus an optical digital output, so the kit works with Russound...

The Russound BTC-2X is a compact Bluetooth 5.1 transceiver that lets guests and family stream from phones and tablets into a Russound multiroom system. It connects to the equipment over a single CAT5/6 run, so the receiver can go where Bluetooth reception is strongest, such as a living area or patio, rather than inside a metal rack.Connected to a compatible SMZ-Series or MCA-Series controller (or to the BTC-2 audio hub), the BTC-2X draws power over the CAT5/6 cable, which can be up to 500 feet...

The Russound EZB-8 E-Z Connector is a speaker terminal block that brings order to multi-room volume-control wiring. When one amplifier feeds several rooms through impedance-matching volume controls, every home run has to land somewhere; the EZB-8 gives those runs a single, labeled termination point instead of a bundle of twisted splices behind the amplifier. It connects up to eight pairs of speakers, and its removable screw-down connectors accept wire up to 12 AWG, so each run can be...

The Russound HTP-7.2 is a double-gang, Decora-style wallplate that gathers every speaker connection for a home theater into one tidy point on the wall. It handles anything from a 5.1 layout up to a full 7.2 system, with binding posts for seven speakers and RCA jacks for two powered subwoofers, so the receiver or amplifier can connect to in-wall speaker runs without loose wire coming out of the drywall. The plate is built in two halves. One half carries four pairs of stereo binding posts; the...

The Russound ICG-6R is a 6.5-inch round NanoPerf grille for Russound IC-Series in-ceiling loudspeakers. It is the same round, bezel-less magnetic style that ships in the box with the IC-Series speakers, so it is the direct replacement when a grille is damaged, lost or covered in construction overspray. The grille sits close to the ceiling surface so the speaker reads as a subtle architectural detail.Magnets hold the grille to the speaker, so it can be pressed into place or pulled off for...

The Russound ICG-6S converts a 6.5-inch Russound IC-Series in-ceiling speaker to a square look. It uses the same bezel-less NanoPerf magnetic design as the round grille that ships with the speakers, and sits close to the ceiling surface so the speaker reads as a subtle architectural detail.Because a square grille has to stay lined up with walls, tile and lighting, Russound includes grille brackets that keep it from rotating and prevent shadowing around the edges. Magnets hold the grille in...

The Russound ICG-8R is an 8-inch round NanoPerf grille for Russound IC-Series in-ceiling loudspeakers. It is the same round, bezel-less magnetic style that ships in the box with the 8-inch IC-Series speakers, so it is the direct replacement when a grille is damaged, lost or covered in construction overspray.The grille has no surrounding bezel and holds in place magnetically, so it can be removed and reseated without tools when the speaker needs to be adjusted or serviced. Choose the ICG-8R for...

The Russound ICG-8S converts an 8-inch Russound IC-Series in-ceiling speaker to a square look. It uses Russound's bezel-less NanoPerf magnetic design and is a grille accessory only; the speaker is purchased separately.Because a square grille must stay lined up with walls, tile or lighting, Russound includes grille brackets that keep it from rotating and prevent shadowing, so the edges stay parallel to the room. Square grilles suit modern interiors, coffered or grid ceilings and rooms with...

The Russound PRO-12 HP is a central speaker selector for systems that need to run 12 rooms of speakers from one location. A front-panel A/B switch chooses which of two source amplifiers feeds all connected speakers, while individual room switches turn each zone on or off.Audiophile-grade autoformers handle impedance matching, and a rotary switch on the rear panel is set according to the number of speaker pairs in use, so the amplifier sees a safe load no matter how many rooms are active. The...

The Russound PRO-8 HP is a central speaker selector for systems that need to run 8 rooms of speakers from one location. A front-panel A/B switch chooses which of two source amplifiers feeds all connected speakers, while individual room switches turn each zone on or off.Audiophile-grade autoformers handle impedance matching, and a rotary switch on the rear panel is set according to the number of speaker pairs in use, so the amplifier sees a safe load no matter how many rooms are active. The HP...

The Russound SDB-4.1 puts room-by-room control of a 4-zone speaker system on one front panel. Two amplifier inputs are provided, and each speaker pair has its own A/B switch, so one room can listen to source A while another plays source B.Every zone also has a dedicated volume knob and an on/off switch. Because the on/off switch is separate from the volume control, a room can be shut off and turned back on at the same listening level. Autoformers provide the impedance matching that keeps the...

The Russound SDB-6.1 puts room-by-room control of a 6-zone speaker system on one front panel. Two amplifier inputs are provided, and each speaker pair has its own A/B switch, so one room can listen to source A while another plays source B.Every zone also has a dedicated volume knob and an on/off switch. Because the on/off switch is separate from the volume control, a room can be shut off and turned back on at the same listening level. Autoformers provide the impedance matching that keeps the...

The Russound SS-4.2 is a single-source speaker selector for distributing one stereo amplifier to up to four rooms or speaker zones. Each pair gets its own front-panel switch, so listeners can turn areas on and off without touching the amplifier. A rear-panel switch chooses how the unit handles amplifier loading. With internal impedance matching engaged, the selector keeps the combined load within a safe range and adds automatic overload protection, which makes it a good partner for...

The Russound SS-6.2 lets a single stereo amplifier or receiver drive up to six pairs of speakers, with an individual on/off switch for each zone on the front panel. It is the larger sibling of the SS-4.2 and suits homes or small businesses where background music needs to reach more areas than a basic A/B switch can handle. A rear-panel mode switch sets how the amplifier load is managed. In impedance-matching mode the selector's internal circuitry keeps the combined speaker load safe for the...

The Russound V-PS-2 is the companion power supply for the VoicePlay V-KP-1 amplified keypad with Alexa Built-in. Each V-KP-1 contains its own stereo amplifier and streaming electronics, and the V-PS-2 provides the clean 24-volt DC power those components need. A single supply delivers up to 60 watts across two zone outputs and can run two keypads, which keeps the parts count low in a typical two-room installation. The enclosure can rest on a shelf or be screwed to a wall or panel using its...

The Shure A-IMXBP-CM is the credenza mount Shure offers as an optional accessory for the IntelliMix Bar Pro Kit. It lets you set the all-in-one video bar on a credenza or similar low furniture below the room display instead of fixing it to the wall or to the screen itself. That makes it a practical choice for rooms with a media cabinet under the display, for spaces where wall work is not permitted, and for rooms that may be rearranged later. Because it is a Shure part designed around the Bar...

The Shure A-IMXBP-DM is a display bracket mount listed by Shure as an optional accessory for the IntelliMix Bar Pro Kit. Rather than resting the video bar on furniture or fixing it to the wall, this bracket attaches the bar to the room display so the cameras sit close to the screen that remote participants appear on. Keeping the camera line near the display helps local attendees look toward the lens naturally while watching the far end, and it keeps the installation tidy because the bar moves...

The Shure A-IMXBP-PWM is the pivoting wall mount Shure offers as an optional accessory for the IntelliMix Bar Pro Kit. It fixes the all-in-one video bar to the wall, typically near the room display, and its pivoting design lets the installer angle the bar so the cameras and array microphones point toward the seating area. Wall mounting frees the credenza, keeps the bar out of reach in busy spaces, and gives a clean, permanent installation for medium and large meeting rooms. Being able to...

The QSC SL-DAN-16-P is a Q-SYS Software-based Dante license that adds 16 x 16 (16 in, 16 out) bidirectional Dante network audio channels to a compatible Q-SYS Core. It is a software/feature license rather than a physical device, activated through the Q-SYS licensing system, and requires no additional I/O hardware.Key FeaturesAdds 16 x 16 Dante audio channels to a Q-SYS CoreSoftware-based—no extra cards or hardware requiredPerpetual, node-locked license tied to a specific CoreLets...

The QSC SL-DAN-32-P is a Q-SYS Software-based Dante license that adds 32 x 32 (32 in, 32 out) bidirectional Dante network audio channels to a compatible Q-SYS Core. It is a software/feature license, not a physical device, and is activated through the Q-SYS licensing system with no additional I/O hardware.Key FeaturesAdds 32 x 32 Dante audio channels to a Q-SYS CoreSoftware-based—no extra cards or hardware requiredPerpetual, node-locked license tied to a specific CoreIdeal for larger...