Mounts & Racks

The Chief KRA245S is a desk clamp base for Kontour column-style monitor arms, the K1C and K2C models in the KXC family. The base clamps the column upright to the edge of the work surface, so the arms can be mounted without a grommet hole or drilling. It works for new installs and is also a straightforward way to change how an existing column arm attaches when furniture changes. Chief lists the part as an installation and mounting-bracket accessory for desk and tabletop use, and it is TAA...

The Chief KRA300B is a laptop and tablet tray in the Kontour accessory line. It turns a monitor arm position into a platform for a notebook or tablet, so a portable device can sit next to your external displays instead of lying flat on the desk. Raising the laptop puts its screen closer to the height of the other monitors and leaves the desk clear for a keyboard, documents, or a docking station. This setup works well for hybrid workers who dock a laptop each day and still use its built-in...

The Chief KRA300S is a laptop and tablet tray in the Kontour accessory line. It turns a monitor arm position into a platform for a notebook or tablet, so a portable device can sit next to your external displays instead of lying flat on the desk. Raising the laptop puts its screen closer to the height of the other monitors and leaves the desk clear for a keyboard, documents, or a docking station. This setup works well for hybrid workers who dock a laptop each day and still use its built-in...

The Chief KRA400B is a weighted adapter plate in the Kontour accessory range. It works as the interface between an arm and a base, and its extra mass keeps the assembly stable on the desk. Chief's data lists VESA 75 x 75 mm and 100 x 100 mm mounting patterns, and distributor data describes it as an arm adapter plate for the FSBIB and FSBI2B bases. Integrators use adapter plates like this to combine Chief components into one finished workstation, for example a monitor or tablet arm on a...

The Chief KRA401B is a weighted adapter plate that connects a Kontour K1 arm to a compatible Chief base. Its added mass helps keep the setup steady, which matters when an articulating arm reaches out over the edge of a counter or desk. Chief's data lists a VESA 100 x 100 mm mounting pattern, and distributor data describes the part as a K1 arm adapter plate for the FSBI2TB and FSRI2T products. Integrators use it to build a complete, adjustable display position from Chief components instead of...

The Chief KRA500B is a desk clamp accessory for the Kontour K3 series, Chief's family of multi-display array mounts. The clamp attaches the array to the edge of a work surface, so a two-, three-, or four-screen setup can go in without a grommet hole. That suits trading floors, operations centers, and engineering desks where furniture changes often or drilling is not allowed. Distributor data calls it a non-focal adjustable clamp for Kontour arrays. Chief lists it as a multi-display accessory...

The Chief KRA500S is a desk clamp accessory for the Kontour K3 series, Chief's family of multi-display array mounts. The clamp attaches the array to the edge of a work surface, so a two-, three-, or four-screen setup can go in without a grommet hole. That suits trading floors, operations centers, and engineering desks where furniture changes often or drilling is not allowed. Distributor data calls it a non-focal adjustable clamp for Kontour arrays. Chief lists it as a multi-display accessory...

The Chief KRAMSB solves a common problem in commercial buildings: hanging a wall-mounted monitor arm on a metal stud wall. Light-gauge steel studs do not hold lag bolts the way wood does, and this accessory gives Kontour K1W and K2W wall arms a secure way to attach to a single steel stud. The steel stud anchors come in the box, so installers do not need to source separate hardware. Capacity is up to 30 lb (13.6 kg), but the real limit depends on which arm is installed, so check Chief's...

The Chief KRAMSW solves a common problem in commercial buildings: hanging a wall-mounted monitor arm on a metal stud wall. Light-gauge steel studs do not hold lag bolts the way wood does, and this accessory gives Kontour K1W and K2W wall arms a secure way to attach to a single steel stud. The steel stud anchors come in the box, so installers do not need to source separate hardware. Capacity is up to 30 lb (13.6 kg), but the real limit depends on which arm is installed, so check Chief's...

The Chief KSA1001B is a wall plate accessory that lets a small flat panel desk mount be used as a wall mount. Instead of buying a separate wall arm, you attach the existing mount hardware to this plate and fix the plate to the wall. That helps when a workstation moves from a desk to a wall, as at a nurses' station or a standing-height counter, or when you want to keep the same hardware across desk and wall positions. Chief lists compatibility with screens that use VESA 75 x 75 mm or 100 x 100...

The Chief KSA1003B is an extension arm in Chief's small flat panel (SFP) accessory line. It adds another link to a compatible mount so the screen can reach farther from its attachment point, which helps when a display has to reach over a deep desk, around a corner, or out from a wall to the user's viewing position. The arm is rated to 40 lb (18.1 kg). Check the capacity of the full assembly too, since the lowest-rated part sets the limit for the whole mount. The black finish suits office and...

The Chief KSA1003S is an extension arm in Chief's small flat panel (SFP) accessory line. It adds another link to a compatible mount so the screen can reach farther from its attachment point, which helps when a display has to reach over a deep desk, around a corner, or out from a wall to the user's viewing position. The arm is rated to 40 lb (18.1 kg). Check the capacity of the full assembly too, since the lowest-rated part sets the limit for the whole mount. The silver finish suits office and...

The Chief KSA1004B upgrades a fixed single or dual arm mount with both extra reach and height adjustment. It attaches to the arm and gives 13.25 in (33.7 cm) of manual height adjustment, so users can raise or lower the screen to suit their posture, a standing desk, or a shared workstation. It supports displays from 2 to 25 lb (0.9-11.3 kg). Chief notes that it is not compatible with arms that are already height-adjustable, so it is meant for fixed-height arms. Distributor data calls it a...

The Chief KSA1014B is a Centris head accessory, the display interface that sits at the end of a Chief small flat panel arm and holds the monitor. Centris is Chief's head design that lets the screen be positioned around its own center, so adjustments feel balanced. This part comes as a separate accessory, useful when you need a spare, want to replace a worn head, or are building a custom setup from Chief SFP components. It is a universal design that supports displays with VESA 75 x 75 mm and...

The Chief KSA1017B is a pole clamp accessory that lets a Chief small flat panel wall or desk mount be used on a pole. Instead of buying a pole-specific mount, you fit the existing mount to this clamp and attach it to the pole. That adds flexibility in places where poles are already part of the setup, such as equipment carts, floor-to-ceiling poles, structural columns with pole adapters, or medical and lab stands. It also lets integrators keep one standard arm across wall, desk, and pole...

The Chief KSA1018B is a metal stud accessory for Chief's small flat panel wall mounts. Commercial interiors are often framed with light-gauge steel studs, which need different hardware than wood framing, and this accessory gives SFP mounts a proper way to attach to that construction. Distributor data describes it as a K Series steel stud accessory. Using a purpose-built Chief part means installers do not have to improvise with general toggles or anchors that are not rated for a monitor arm's...

The Chief KSA1018S is a metal stud accessory for Chief's small flat panel wall mounts. Commercial interiors are often framed with light-gauge steel studs, which need different hardware than wood framing, and this accessory gives SFP mounts a proper way to attach to that construction. Distributor data describes it as a K Series steel stud accessory. Using a purpose-built Chief part means installers do not have to improvise with general toggles or anchors that are not rated for a monitor arm's...

The Chief KSA1019B is a Centris head with Turntite adjustment. Turntite puts the tilt and roll friction controls on the outside of the head, so installers can set the tension to suit the display without taking anything apart. That makes it easy to fine-tune how the screen holds its position, whether it is a light monitor or a heavier panel that needs firmer tension. Chief specifies 15 degrees of rotation. As a universal design it works across Chief small flat panel mounts, and it fits well...

The Chief KSA1020B gets the computer off the floor and puts it where it belongs: on the wall or secured to the desk. It adjusts to fit everything from ultra-small form factor PCs to full tower desktops, holding units 9.75-18 in (24.8-45.7 cm) tall and up to 8.5 in (215 mm) wide. Chief's Q-Latch system adds a latching flag for security, and the CPU connects and disconnects without tools, which speeds up IT swaps. Install options include vertical wall mounting and both vertical and horizontal...

The Chief KSA1021B is a keyboard tray accessory from Chief's small flat panel accessory range. It gives the keyboard a dedicated surface that works with a Chief monitor mount setup, freeing the desk for documents and other work. It has 2 in (50.8 mm) of manual height adjustment, so the keyboard can be set a little higher or lower to suit the user, which is useful on shared workstations. A tray like this matters most in settings where the input station sits apart from a regular desk, such as...

The Chief KSA1022B Wall Track turns a section of wall into an adjustable mounting surface for Chief monitor mounts and accessories. Install the track vertically or horizontally, then place monitors, CPU holders, or other components anywhere along its length and move them later without new holes. Built-in cable channels keep cords out of sight for a clean result. Capacity depends on the install: across two studs horizontally, two mounts at up to 25 lb (11.3 kg) each; across three studs, three...

The Chief KSA1023B is a low-profile, U-style mount that holds a computer flat against the wall. It adds less than 1 in (25 mm) of depth beyond the CPU, so the PC can sit behind a swing-arm monitor mount and stay out of sight. You can also use it on its own anywhere on a wall. The universal cradle fits CPUs from 1.75 to 3.75 in (44-95 mm) deep, covering most small form factor and mini PCs used in commercial workstations. Install options include steel studs, wood studs, drywall, or Chief's wall...

The Chief KSA1024B is a Centris quick connect bracket, a quick-release interface that makes it easy to put a small flat panel on a Chief monitor mount and take it off again. Once the bracket is on the display, the screen can be lifted off the mount for service, swaps, or cleaning and put back without fumbling with screws while holding the monitor. That saves real time in IT departments that swap many displays and in clinical spaces where screens are moved or replaced often. Chief notes that it...

The Chief KSA1026B lets you keep a Dell AC511 USB soundbar with your monitor when the display is on a Chief mount. Normally the soundbar clips to the monitor's stand, and once the stand is removed for VESA mounting it has nowhere to go. This accessory fits at the 100 x 100 mm VESA interface and gives the soundbar a dedicated place under the screen, so the audio follows the display as it is adjusted. The soundbar secures without tools, and the typical monitor range is 22-32 in diagonal (559-813...