Mounts & Racks

The Chief FHB5038 Fusion VESA adapter extends the vertical reach of the interface on Chief's extra-large Fusion wall mounts, the XSM1U fixed and XTM1U tilt models. It adds up to 400 mm of vertical extension, allowing these mounts to accept very large displays whose mounting holes are spaced farther apart vertically than the standard interface brackets reach. The ITS description calls it a 1000 mm adapter, consistent with extending a tall interface toward a 1000 mm pattern, but Chief's...

The Chief FHB5050 interface extender widens what the ConnexSys video wall mounting system can hold. Fitted to the ConnexSys interface, the two-piece bracket set lets the system accept displays with mounting patterns up to 800 x 400 mm, which brings larger-format panels within reach of a ConnexSys rail installation. Chief describes a simple three-step installation. Each side of the bracket measures 17 x 4.71 x 0.63 inches (432 x 120 x 16 mm), so the extender adds little depth to the wall. The...

The Chief FHB5062 is a hardware-only kit containing M6 x 45 mm screws and 1.25 inch spacers. It is used when a display needs to sit a set distance off the interface brackets of a Chief Fusion or Thinstall mount, for example to clear a curved or recessed rear panel, protruding connectors or a ridge around the mounting holes. Supplying the screw and spacer together ensures the screw is long enough to pass through the spacer and still achieve proper thread engagement in an M6 display insert. No...

The Chief FHB5077 is a 500 mm interface adapter for Chief Fusion large wall mounts of the version 2, pole-type design. It allows the mount to accept a display whose mounting pattern calls for 500 mm spacing, which is common on large commercial and consumer panels. The kit includes the adapter brackets and the flange hex nuts needed to secure them to the mount. Chief is explicit that the FHB5077 is for version 2 pole-type Fusion mounts only, so it should not be ordered for older or rail-type...

The Chief FHB5078 hardware kit extends version 2 Fusion interface brackets by up to 400 mm vertically. Chief restricts it to rail-type Fusion mounts. Extra vertical reach is needed whenever a display's tall dimension must be captured by the interface, most commonly when a landscape-oriented panel is turned to portrait and its longer hole spacing now runs vertically. The ITS description identifies it as a menu-board portrait adapter kit, matching that use in quick-service restaurants and...

The Chief FHB5087 is an adapter bracket kit that gives the 70 inch Cisco Webex Board (originally sold as the Cisco Spark Board) a standard 600 x 400 VESA mounting pattern. The Webex Board is a heavy collaboration display with a non-standard mounting arrangement, and this adapter bridges it to Chief Fusion mounts so it can be installed on an XPA1U or LSM1U for wall or freestanding applications. Chief points out that installers using a Q-Latch style mount should order the PSB2087 instead. The...

The Chief FHB5088 is an adapter bracket kit that gives the 55 inch Cisco Webex Board (originally sold as the Cisco Spark Board) a standard 600 x 400 VESA mounting pattern. The Webex Board is a heavy collaboration display with a non-standard mounting arrangement, and this adapter bridges it to Chief Fusion mounts so it can be installed on an XPA1U or LSM1U for wall or freestanding applications. Chief points out that installers using a Q-Latch style mount should order the PSB2088 instead. The...

The Chief FHB5104 lets very large displays with a 900 x 600 mm VESA pattern be mounted on Chief hardware built around a 400 x 400 mm interface. The adapter frame bolts to the display's wide pattern and presents a 400 x 400 pattern to the mount's universal interface brackets, keeping the screen aligned and secure. It measures 37.79 inches wide by 25 inches high and only 0.92 inches deep, so it adds very little to the overall installed depth, and Chief rates it at 250 lbs (113.4 kg). Chief notes...

The Chief FHB5106 is a 500 mm vertical extender for standard Chief Fusion interface brackets. Chief designed it for the LCM1U large ceiling mount and the LPAUB and LFAUB Fusion floor stand and cart platforms, where it lengthens the interface so the mount can take displays with taller mounting patterns than the stock brackets reach. Chief lists it as a fixed, ceiling-application installation accessory in the modular Fusion family. Because it extends an existing interface, you will still need...

The Chief FHB5147 is a universal flat panel hardware assortment for installers who need the right M8 screw on hand. It contains four each of M8 Phillips pan-head machine screws in eight lengths (16, 20, 25, 30, 35, 40, 45 and 50 mm) plus four spacers, covering the wide range of thread depths and rear-panel shapes found on displays with M8 inserts. Choosing the correct length is critical: a screw that is too short gives poor thread engagement, while one that is too long can bottom out and...

The Chief FHB5149 is a hardware kit for displays whose VESA mounting holes are not centered vertically on the back of the screen. On those models the panel ends up sitting noticeably higher or lower than the mount position, which throws off alignment in rows, video walls and fixed-height installs. The FHB5149 adds a pair of offset adapter brackets between the display and the mount's interface arms so the screen can be shifted back to where it belongs. Chief rates the kit for vertical VESA...

The Chief FHB5164 is a model-specific VESA shift bracket for the 65-inch Samsung Flip2 interactive whiteboard display. It converts the display's 400 x 400 mm hole pattern down to 300 x 300 mm and moves the mounting center 3.43 inches up or down, placing the Flip2's center of mass correctly over the mount. Chief designed it for use with its FRA rotation bracket so the Flip2 can be turned between portrait and landscape for collaboration and presentation use. The bracket ships with the hardware...

The Chief FHB5174 is a set of interface extenders for the Tempo Flat Panel Wall Mount System. Standard Tempo interfaces cover display hole patterns up to 450 mm tall; these extenders attach directly to the existing interfaces and stretch that reach to 650 mm, so larger screens with taller mounting patterns can be hung on the same Tempo rail system. Because they bolt onto the interfaces rather than sitting between the display and the mount, they do not push the screen farther off the wall....

The Chief FHB5177 lets a display with a VESA pattern outside the Voyager cart's native interface mount to the cart. It sits between the screen and the cart's VESA-compliant mount and spans hole patterns from 200 x 125 mm up to 800 x 600 mm, which covers most large commercial panels. Chief lists typical screen sizes of 55 to 86 inches and a weight capacity of 165 lbs. The adapter is fixed, so tilt or height adjustments come from the cart itself. It weighs 10.61 lbs on its own.Key Features200 x...

The Chief FHB5196 combines two accessories that large-format installs often need together. It includes M8 screws in several lengths with spacers, matching the hole size used by most big commercial panels, and a set of vertical offset adapter brackets for screens whose VESA pattern sits high or low rather than centered. With the offset brackets, the display can be aligned at its intended height on the mount. Chief cites Samsung QMR, QBR, QHR, QET and QBN series displays as examples. The kit...

The Chief FHBO5168 is an interface adapter for 55-inch outdoor-rated displays whose native mounting points do not follow a standard VESA layout. The brackets attach to the display at a 1186 x 560 mm hole spacing and present a standard 600 x 400 mm pattern, so the screen can be hung on a wide selection of outdoor-rated and indoor mounts. Chief notes that Samsung reviewed the adapter against its thermal guidelines for outdoor use with the OH55A-S, so airflow around the display is accounted for....

The Chief FHBO5169 is a model-specific interface bracket for Samsung's 46-inch OH46F and OH46B outdoor displays. These screens use a non-standard mounting layout, and the FHBO5169 translates it to a 600 x 400 mm VESA pattern so the display can be installed on a broad range of outdoor-rated and indoor mounts. Samsung has reviewed the bracket against its thermal guidelines for outdoor installation, and Chief provides a review completion statement in the product resources. The bracket is black...

The Chief FHBU is the universal hardware bag that comes with Chief's Medium, Large and Extra-Large Universal Fusion mounts, offered separately as a replacement. If a mount is being moved to a new display, re-used from a previous project, or the original hardware went missing on the job site, the FHBU restores the universal hardware assortment without ordering a new mount. Chief does not publish the bag's itemized contents, so confirm the screw size and length your display requires before...

The Chief FHBUL is a universal VESA adapter bracket for the Impact Series kiosk enclosure. The kiosk's built-in interface handles a set range of display mounting patterns; adding the FHBUL extends that range by an additional 200 mm, so a wider selection of commercial displays can be installed in the kiosk. Chief's technical drawing shows the full compatibility range, and the item description lists 200 x 200 to 600 x 600 mm. The bracket is fixed, carries up to 200 lbs, and is TAA compliant per...

The Chief FHP110B is a ceiling mount kit for small flat panel displays, with everything needed to suspend a single screen from the ceiling in one part number. Its extension column adjusts from 23.61 to 42.61 inches, with a further 0.87 inch of manual height fine-tuning, and the display can swivel and be leveled after installation. Chief rates it for displays up to 40 lbs; the matching FHS110 interface in this family covers 75 x 75 and 100 x 100 mm patterns for typical 10 to 40 inch screens....

The Chief FHPVB is a complete ceiling mounting kit for small flat panel displays. It includes a ceiling plate, an adjustable extension column, two snap-on plastic covers that hide cabling inside the column, and a pivot/tilt attachment for the display. The column adjusts from 23.61 to 42.61 inches, with another 0.87 inch of manual fine-tuning. Chief's Centris gravity-centered tilt balances itself for different display weights, so the screen stays where it is set without tension adjustments. The...

The Chief FHS110B is the display-side interface for ceiling mounting a small flat panel. It is sold as the interface only: it attaches to the back of a screen with a 75 x 75 or 100 x 100 mm VESA pattern and connects to separate ceiling plate and column components to complete the installation. Chief lists it for typical 10 to 40 inch displays weighing up to 40 lbs, in landscape or portrait, with leveling after installation. The mount is black and UL Listed; Chief lists it as not TAA...

The Chief FHSVB is a universal ceiling mount for small flat panel displays. It adds 200 x 100 mm to the 75 x 75 and 100 x 100 mm VESA patterns covered by the FHS110B, so it suits a broader range of compact monitors and small TVs. Chief lists typical screen sizes of 10 to 40 inches and a 40 lb weight capacity, with leveling after installation. Black, UL Listed; Chief lists it as not TAA compliant. Chief does not publish a description for this SKU, so confirm which ceiling and column components...

The Chief FMSCA is the floating ceiling box for Fusion modular ceiling installations such as suspended menu boards. A row of displays hangs from a horizontal extrusion, and each end of that extrusion is held by a height-adjust ceiling box (FMSCM) on a column. When the extrusion gets long, the FMSCA adds a supporting point between those two boxes so the span does not sag. It offers micro-adjustable depth of 0 to 1 inch for alignment. Black; Chief lists it as not TAA compliant.Key...