Mounts & Racks

The Chief FCACLIPS Quick Tie pack contains ten clips that add cable tie-down points to Fusion display mounts. Each clip slides onto the Fusion crossbar and locks in place with a quick twist of the wrist, and can be positioned laterally anywhere along the back of the Fusion interface. Once fitted, the clips act as anchors for zip ties, letting installers bundle power, HDMI and network cables neatly behind the display and keep them clear of moving or adjustable parts. They are especially useful...

The Chief FCADA moves a Fusion MTMS1U or STMS1U wall mount further out from the wall. It offers three depth settings, 3.25, 4 and 4.75 inches, so displays can be staggered at different distances from the wall. Combined with Chief's FRA Freestyle Rotation Adapter, that stagger allows creative overlapping and angled display layouts in which one screen sits slightly in front of its neighbor. The accessory is rated for 125 lbs, measures 6.38 x 13.5 x 4.75 inches, is finished in black and is TAA...

The Chief FCALRB1 lets you carry a Logitech Rally Bar, Rally Bar Mini or Rally Bar Huddle on the same Chief Fusion mount that holds the display, so the conference camera and speakers stay aligned with the screen without a separate wall bracket. It suits meeting rooms standardizing on Logitech video bars and Chief Fusion hardware. Chief's catalog lists the part and its compatibility but did not return published dimensions, weight limits or adjustment ranges at the time of writing, so please...

The Chief FCASCA provides a way to put displays on round structural columns, a common challenge in airports, arenas, convention centers and open-plan offices. It wraps steel or concrete columns from 12 to 24 inches in diameter and gives Chief Fusion, Fusion Modular and Thinstall swing-arm mounts a flat attachment surface. The adapter can be cut to size in the field and includes a cut-to-length aesthetic cover for a clean finish. It supports landscape or portrait displays and is rated for 200...

The Chief FCASFP is a small/medium tilt interface for Fusion modular multi-display systems. It is the piece that bolts to the back of the display and hangs it on the Fusion extrusion, adding tilt adjustment so each screen can be angled toward viewers. Chief rates it for 75 lbs and lists it for wall and ceiling applications in landscape or portrait orientation, making it a building block for custom arrays, menu boards and replacement parts on existing Fusion installations. Chief publishes only...

The Chief FCASTC Fusion Storage Cabinet gives a Fusion display installation a secure place for the gear that runs it. Chief categorizes it as component storage with rack rails, cable management, camera mounting provisions and security, rated for 65 lbs, and lists it as height adjustable for wall or furniture applications. It is a practical way to keep a room PC, codec, network switch or power supply locked away near the display rather than on a credenza. Chief also tags the cabinet as ADA...

The Chief FCAT1 is a toggler hardware kit for attaching Chief wall mounts, including large flat panel Fusion wall mounts, to metal stud walls. Metal studs cannot hold standard lag bolts, so the toggles open behind the stud face to spread the load. The kit is intended for drywall between 1/2 inch and 5/8 inch thick; installed weight capacity is governed by the mount and display, not the kit alone. Our distributor lists the hardware as 1/4-20 Grade 5. Always follow Chief's installation...

The Chief FCAV1U adds a pull-out mechanism to Fusion fixed and tilt wall mounts, letting a technician draw the display up to 11.54 inches away from the wall to reach ports, cables and power. It is especially helpful in recessed or niche installations where there is no room to reach behind the screen. Retracted, the accessory adds just 1.56 inches of depth before the mount itself. It carries up to 150 lbs, supports landscape and portrait mounting, measures 19.5 x 5.86 x 1.56 inches, is finished...

The Chief FCAVCA is a versatile adapter for putting displays on structural members that are not flat walls: I-beams, box beams, trusses and columns of various shapes up to 19 inches wide, in steel or concrete. It gives Chief Fusion, Fusion Modular and Thinstall swing-arm mounts a solid attachment point and supports landscape or portrait displays up to 200 lbs, with tilt and screen size determined by the paired mount. Chief offers dedicated hardware sets for different structures, including the...

The Chief FCAVCSU80 is a hardware set of two square U-bolts that secures the FCAVCA Variable Column Adapter to rectangular structures. Chief sizes it for 8-inch concrete columns or 8-inch steel I-beams, and titles the set as 8 x 6 inches. The U-bolts wrap around the structural member and clamp the adapter plate in place, after which a compatible Chief Fusion, Fusion Modular or Thinstall mount attaches to the adapter. Use it when the column or beam is too large or irregular for direct...

The Chief FCAVCU20 is a two-piece U-bolt set used to fasten the Chief FCAVCA adapter around a 2 inch (50 mm) pole or truss tube. It is a small installation accessory rather than a complete mount: the U-bolts provide the clamping hardware that lets the FCAVCA, and the display mount attached to it, ride on round structural members. Chief positions this part for large-venue work, where screens are often hung from existing pipe, truss or column structure instead of a wall or ceiling deck. Ordering...

The Chief FCAX08 extension bracket kit lengthens the horizontal Fusion extrusion on Chief LVM, LBM and LCM freestanding and ceiling multi-display mounts. Each kit contains two brackets, one fitted to each end of the existing extrusion, and each bracket adds 8 inches (20.3 cm) of length. The extra reach lets the mount carry larger screens, or displays whose mounting holes sit farther apart than the stock extrusion allows. Chief states support for displays up to 60 inches and mounting patterns...

The Chief FCAX14 extension bracket kit lengthens the horizontal Fusion extrusion on Chief LVM, LBM and LCM freestanding and ceiling multi-display mounts. Each kit contains two brackets, one fitted to each end of the existing extrusion, and each bracket adds 14 inches (35.6 cm) of length. The extra reach lets the mount carry larger screens, or displays whose mounting holes sit farther apart than the stock extrusion allows. Chief states support for displays up to 60 inches and mounting patterns...

The Chief FCAX20 extension bracket kit lengthens the horizontal Fusion extrusion on Chief LVM, LBM and LCM freestanding and ceiling multi-display mounts. Each kit contains two brackets, one fitted to each end of the existing extrusion, and each bracket adds 20 inches (50.8 cm) of length. The extra reach lets the mount carry larger screens, or displays whose mounting holes sit farther apart than the stock extrusion allows. Chief states support for displays up to 60 inches and mounting patterns...

The Chief FCAXV1U turns a Fusion extra-large micro-adjustable wall mount into a pull-out installation. It sits between the wall and a Chief XSM1U fixed or XTM1U tilt mount, and its scissor assembly travels up to 9.5 inches, giving as much as 11.54 inches (293 mm) of extension once combined with the mount. That reach makes it practical to get behind a large display for cabling and service, especially when the screen is recessed in a niche. Plumb adjustment of +0.5 to -2 degrees helps keep the...

The Chief FCK000 is part of the FCK family of Fusion connector accessories, listed by Chief as the Fusion® Connector Union. It is the zero-length member of the family: a union that ties Fusion mount hardware together without adding any extension, where the shortest possible connection is wanted. Chief publishes only basic data for this part (length, finish and packaging), with no written description or compatibility list, so we recommend confirming the fit against the instructions for your...

The Chief FCK008 is part of the FCK family of Fusion connector accessories, listed by Chief as the Fusion® Connector Kit - 8 Inch. It provides a 8 inch (20.3 cm) connector, and Chief files it under multi-display accessories, the role these kits play in Fusion installations where more than one display or mount section is linked. Chief publishes only basic data for this part (length, finish and packaging), with no written description or compatibility list, so we recommend confirming the fit...

The Chief FCK016 is part of the FCK family of Fusion connector accessories, listed by Chief as the Fusion® Connector Kit - 16 Inch. It provides a 16 inch (40.6 cm) connector, and Chief files it under multi-display accessories, the role these kits play in Fusion installations where more than one display or mount section is linked. Chief publishes only basic data for this part (length, finish and packaging), with no written description or compatibility list, so we recommend confirming the fit...

The Chief FCS1U suspends a flat panel between floor and ceiling on tensioned cables, giving a very slim, open look that suits retail windows and other spaces where a wall or conventional ceiling mount is impractical. A single SKU can be set up for portrait or landscape, and the orientation can be changed later. Pitch alignment can be adjusted after the display is hung, so the screen can be leveled without over-tightening the cables. The mount carries displays up to 130 lbs (59 kg) with...

The Chief FHB5017 is a Fusion and Thinstall hardware kit that provides a 3.5 inch vertical offset when installing a display on a Chief Fusion TS series mount, using M8 fasteners. A vertical offset kit is typically used when a display's mounting holes sit high or low relative to its visual center, or when the screen needs to sit at a slightly different height than the mount itself allows, without relocating the wall plate. It ships in a long, slim carton (24 inches), which reflects the...

The Chief FHB5032 is an interface extension kit for displays whose horizontal hole spacing is a little wider than a Fusion interface can reach. It fits onto each 400 mm-tall Fusion interface upright and shifts the attachment point outward by 50 mm per side, adding 100 mm to the total horizontal mounting pattern the mount can accept. Chief notes the kit fits all Fusion interface uprights, ships with Custom and Universal Fusion mounts, and is also compatible with Universal Thinstall mounts, so...

The Chief FHB5034 is a display-specific hardware kit that adds depth between a screen and its Chief mount. It contains M6 screws and 1.375 inch spacers, which hold the display farther from the interface brackets so there is room behind the panel for side or rear inputs, cable connectors or a media player attached to the back of the screen. The ITS description associates this kit with LG displays fitted with a media player. Using the correct-length screws together with spacers matters: too...

The Chief FHB5036 lets a mount with 400 mm-tall interface capacity accept a display whose mounting holes are spaced 600 mm apart vertically. The kit extends the vertical pattern from 400 mm to 600 mm and uses M6 screws, with no offset, so the display stays centered on the mount rather than being shifted up or down. That makes it useful when a new, larger display replaces an older one on an existing Fusion or Thinstall installation, or when a large-format panel with a tall VESA pattern needs to...

The Chief FHB5037 lets a mount with 400 mm-tall interface capacity accept a display whose mounting holes are spaced 600 mm apart vertically. The kit extends the vertical pattern from 400 mm to 600 mm and uses M8 screws, with no offset, so the display stays centered on the mount rather than being shifted up or down. That makes it useful when a new, larger display replaces an older one on an existing Fusion or Thinstall installation, or when a large-format panel with a tall VESA pattern needs to...