Mounts & Racks

The Chief FCA510 is the small member of Chief's Fusion storage accessories, built to tuck a small form factor PC or digital signage media player out of sight behind a flat panel display. Keeping the player at the screen shortens HDMI and power runs and leaves the area around the display clean, which is especially useful for signage, menu boards and kiosks. The enclosure accepts devices up to 10.5" x 10.5" x 3" (height x width x depth), and its open design leaves the input and output ports...

The Chief FCA515 is the medium member of Chief's Fusion storage accessories, built to tuck a small form factor PC or digital signage media player out of sight behind a flat panel display. Keeping the player at the screen shortens HDMI and power runs and leaves the area around the display clean, which is especially useful for signage, menu boards and kiosks. The enclosure accepts devices up to 15.5" x 15.5" x 4.5" (height x width x depth), and its open design leaves the input and output ports...

The Chief FCA520 Universal Clamp Kit gives installers a simple way to hang small devices directly on a Fusion mount. It clamps a media player, power strip or similar component up to 2.13 inches deep to the back of a flat panel installation, keeping signage players and power right at the screen without a separate enclosure. The clamps ride on Chief's Fusion rail-extrusion mounts and can be positioned anywhere along the back of the mount for the cleanest cable routing. They can also be reversed...

The Chief FCA530 adds a center channel speaker position to a Fusion display installation. It attaches to Chief Fusion carts, stands and flat panel ceiling mounts and holds a center speaker or soundbar directly beneath the screen, where dialogue and program audio seem to come from the picture itself. The adapter is infinitely adjustable, so the speaker can be set flush with the bottom edge of the display regardless of screen size, for a finished, integrated look. It supports speakers weighing...

The Chief FCA535 Side Speaker Adapters let you flank a Fusion-mounted display with left and right speakers for true stereo sound at the screen. They attach to Chief Fusion carts, stands and flat panel ceiling mounts, then adjust infinitely so each speaker sits flush against the side of the display for a clean, built-in appearance. The arms expand to suit TVs up to 60 inches diagonal. Chief lists a weight capacity of 10 lbs; the listing does not say whether that figure is per side, so plan...

The Chief FCA540 puts power exactly where a Fusion-mounted display needs it. It is a housing for an electrical outlet that fastens directly to the back of a Chief single LCM ceiling mount in a vertical position, or horizontally anywhere along the newer Fusion crossbar. Because it can slide laterally along the back of the Fusion interface, the outlet can be lined up with the display's power inlet for short, neat cord runs. This is especially handy on ceiling-hung screens, where bringing power...

The Chief FCA611B is the small height-adjustable accessory shelf for Fusion carts and stands. It gives a mobile or floor-standing display a convenient work surface for a laptop, conferencing codec, document camera or other small device, supporting up to 25 lbs. The shelf can be positioned at the height that suits the user, whether that is a presenter standing at the cart or equipment tucked lower out of view. Its black finish matches Chief's black Fusion carts. Chief does not publish shelf...

The Chief FCA613B is the large height-adjustable accessory shelf in the Fusion cart accessory family. It provides a bigger work surface than the small FCA611B, with room for a laptop, keyboard, conferencing equipment or other gear, and it is rated to carry up to 25 lbs. The shelf mounts to the cart and can be set at a comfortable height for presenters or positioned to keep equipment organized. The distributor describes it as a large shelf with storage. It is finished in black to match Chief's...

The Chief FCA624B is a Fusion dual display accessory that turns a single-display installation into a side-by-side pair. It supports two screens in the 37 to 60 inch range, with the usable size depending on the display and the width of its mounting pattern, and carries a combined rated load of 125 lbs. Pairing screens this way is a common setup for video conferencing, where one display shows the far-end participants and the other shows shared content, and for dashboards and dual-source...

The Chief FCA624S is a Fusion dual display accessory that turns a single-display installation into a side-by-side pair. It supports two screens in the 37 to 60 inch range, with the usable size depending on the display and the width of its mounting pattern, and carries a combined rated load of 125 lbs. Pairing screens this way is a common setup for video conferencing, where one display shows the far-end participants and the other shows shared content, and for dashboards and dual-source...

The Chief FCA650B is the large CPU holder for Fusion carts and stands. It keeps a desktop PC, small form factor computer or similar device secured to the cart, so the computer travels with the display and stays off the floor and out of the way of feet and cleaning equipment. The holder accepts equipment up to 15.00" x 5.13" x 15.00" (381 x 130 x 381 mm) and is rated for up to 25 lbs (11.3 kg). That makes it a good fit for interactive displays, digital signage carts and mobile conferencing...

The Chief FCA651B is the medium CPU holder for Fusion carts and stands. It keeps a desktop PC, small form factor computer or similar device secured to the cart, so the computer travels with the display and stays off the floor and out of the way of feet and cleaning equipment. The holder accepts equipment up to 10.00" x 3.63" x 10.00" (254 x 92 x 254 mm) and is rated for up to 10 lbs (4.5 kg). That makes it a good fit for interactive displays, digital signage carts and mobile conferencing...

The Chief FCA776 converts a Fusion LVM freestanding video wall from a rolling unit into a planted, more permanent installation. Installers remove the LVM's casters and thread in these leveling feet, and each FCA776 includes six feet. Every foot provides 0.7 inches of leveling adjustment, which helps compensate for uneven floors so the wall stands plumb and the screens stay aligned seam to seam. Each foot is rated for 250 lbs. Swapping casters for feet is a good choice once a video wall has...

The Chief FCA800 adds a 8-inch equipment shelf to a Fusion Series display installation. It attaches to the Fusion mount interface and can be set either above the screen, where it makes a natural home for a video-conferencing camera, or below it for a small media player, codec or wireless presentation receiver. The bracket extends 12.9"-19.2" (327-487 mm) from the center of the screen to the shelf, so the shelf clears the bezel on 37"-70" panels. A turned-up lip on the end of the shelf helps...

The Chief FCA800E is a camera mount designed around the Vaddio IntelliSHOT auto-tracking camera, letting that camera be installed right at the top or bottom edge of a large display that is hung on a Chief Fusion mount. Placing the lens tight to the screen keeps participants looking toward the camera while they watch the far end, and it avoids a separate wall bracket that would need its own blocking and cable path. Chief lists an equipment height range of 26.8 to 39 inches and a maximum screen...

The Chief FCA800K is a camera mount designed around the Vaddio ConferenceSHOT ePTZ camera, letting that camera be installed right at the top or bottom edge of a large display that is hung on a Chief Fusion mount. Placing the lens tight to the screen keeps participants looking toward the camera while they watch the far end, and it avoids a separate wall bracket that would need its own blocking and cable path. Chief lists an equipment height range of 26 to 43 inches for this version. The mount...

The Chief FCA801 adds a 14-inch equipment shelf to a Fusion Series display installation. It attaches to the Fusion mount interface and can be set either above the screen, where it makes a natural home for a video-conferencing camera, or below it for a small media player, codec or wireless presentation receiver. The bracket extends 12.9"-19.2" (327-487 mm) from the center of the screen to the shelf, so the shelf clears the bezel on 37"-70" panels. A turned-up lip on the end of the shelf helps...

The Chief FCA802 gives a Fusion-mounted large display its own equipment shelf directly underneath the screen. It is sized for the gear that normally ends up on a credenza or hidden behind the panel: a conferencing codec, a streaming or signage player, a small switcher or a wireless presentation receiver. The 18-inch-wide platform supports up to 20 lbs and can be positioned both side to side and up and down to land exactly where it is needed, then locked in place. Because it hangs from the...

The Chief FCA803 is a minimal, low-profile shelf for adding a small USB webcam to a Fusion-mounted large display. Instead of the wider component shelves in the Fusion range, it uses a 1.5-inch platform that keeps the hardware visually out of the way while placing the camera right at the edge of the screen, where eye contact on video calls looks most natural. The arm adjusts in height through a 12.9"-19.2" (327-487 mm) range from the center of the display, so it can clear the top or bottom...

The Chief FCA810 adds a 8-inch equipment shelf to a Fusion Series display installation. It attaches to the Fusion mount interface and can be set either above the screen, where it makes a natural home for a video-conferencing camera, or below it for a small media player, codec or wireless presentation receiver. The bracket extends 18.0"-30.8" (457-782 mm) from the center of the screen to the shelf, so the shelf clears the bezel on 62"-100" panels. A turned-up lip on the end of the shelf helps...

The Chief FCA810E is a camera mount designed around the Vaddio IntelliSHOT auto-tracking camera, letting that camera be installed right at the top or bottom edge of a extra-large display that is hung on a Chief Fusion mount. Placing the lens tight to the screen keeps participants looking toward the camera while they watch the far end, and it avoids a separate wall bracket that would need its own blocking and cable path. For extra-large panels Chief lists an equipment height range of 37 to 63...

The Chief FCA810K is a camera mount designed around the Vaddio ConferenceSHOT ePTZ camera, letting that camera be installed right at the top or bottom edge of a extra-large display that is hung on a Chief Fusion mount. Placing the lens tight to the screen keeps participants looking toward the camera while they watch the far end, and it avoids a separate wall bracket that would need its own blocking and cable path. Chief lists a maximum extension of 31.85 inches from the center of the display...

The Chief FCA811 adds a 14-inch equipment shelf to a Fusion Series display installation. It attaches to the Fusion mount interface and can be set either above the screen, where it makes a natural home for a video-conferencing camera, or below it for a small media player, codec or wireless presentation receiver. The bracket extends 18.0"-30.8" (457-782 mm) from the center of the screen to the shelf, so the shelf clears the bezel on 62"-100" panels. A turned-up lip on the end of the shelf helps...

The Chief FCA812 gives a Fusion-mounted extra-large display its own equipment shelf directly underneath the screen. It is sized for the gear that normally ends up on a credenza or hidden behind the panel: a conferencing codec, a streaming or signage player, a small switcher or a wireless presentation receiver. The 18-inch-wide platform supports up to 20 lbs and can be positioned both side to side and up and down to land exactly where it is needed, then locked in place. Because it hangs from...