Mounts & Racks

The Chief DVA700 is a reusable spacer tool used during installation of TiLED universal direct-view LED (dvLED) wall mounts. Getting cabinet spacing right on the first pass is critical with dvLED, where small layout errors show up as visible seams across the finished canvas. The DVA700 gives installers a fixed 27.5-inch (700 mm) reference so mounting points for 27-inch dvLED panels can be set consistently along the wall. The tool is made from brushed stainless steel, measures 36 x 8 x 4 inches,...

The Chief DVAHBKIT supplies a pair of capture H-blocks for the TiLED universal direct-view LED mounting system. When a video wall grows beyond its first row, the cabinets above and below need to share mounting points cleanly so the seams stay tight. Each H-block does exactly that: it captures both top mounting buttons on a lower cabinet and the bottom pair of buttons on the cabinet stacked above it, tying the two together on the wall structure. The kit is intended for expanding a TiLED...

The Chief DVAM10-1 is a kit of M10 mounting buttons for the TiLED universal direct-view LED mounting system. Buttons thread into the rear mounting holes of a dvLED cabinet and engage the TiLED wall mount, so the cabinet hangs securely and can be aligned tightly with its neighbors. Each panel uses four buttons, and this kit contains 4 buttons, enough for 1 panel. The single-panel pack is handy for small walls, spares or replacing hardware during service. The buttons provide 0.125 inches (3.2...

The Chief DVAM10-10 is a kit of M10 mounting buttons for the TiLED universal direct-view LED mounting system. Buttons thread into the rear mounting holes of a dvLED cabinet and engage the TiLED wall mount, so the cabinet hangs securely and can be aligned tightly with its neighbors. Each panel uses four buttons, and this kit contains 40 buttons, enough for 10 panels. Bulk packaging keeps larger video walls on a single part number and simplifies ordering for multi-cabinet jobs. The buttons...

The Chief DVAM10-25 is a kit of M10 mounting buttons for the TiLED universal direct-view LED mounting system. Buttons thread into the rear mounting holes of a dvLED cabinet and engage the TiLED wall mount, so the cabinet hangs securely and can be aligned tightly with its neighbors. Each panel uses four buttons, and this kit contains 100 buttons, enough for 25 panels. Bulk packaging keeps larger video walls on a single part number and simplifies ordering for multi-cabinet jobs. The buttons...

The Chief DVAM12-1 is a kit of M12 mounting buttons for the TiLED universal direct-view LED mounting system. Buttons thread into the rear mounting holes of a dvLED cabinet and engage the TiLED wall mount, so the cabinet hangs securely and can be aligned tightly with its neighbors. Each panel uses four buttons, and this kit contains 4 buttons, enough for 1 panel. The single-panel pack is handy for small walls, spares or replacing hardware during service. The buttons provide 0.125 inches (3.2...

The Chief DVAM12-10 is a kit of M12 mounting buttons for the TiLED universal direct-view LED mounting system. Buttons thread into the rear mounting holes of a dvLED cabinet and engage the TiLED wall mount, so the cabinet hangs securely and can be aligned tightly with its neighbors. Each panel uses four buttons, and this kit contains 40 buttons, enough for 10 panels. Bulk packaging keeps larger video walls on a single part number and simplifies ordering for multi-cabinet jobs. The buttons...

The Chief DVAM12-25 is a kit of M12 mounting buttons for the TiLED universal direct-view LED mounting system. Buttons thread into the rear mounting holes of a dvLED cabinet and engage the TiLED wall mount, so the cabinet hangs securely and can be aligned tightly with its neighbors. Each panel uses four buttons, and this kit contains 100 buttons, enough for 25 panels. Bulk packaging keeps larger video walls on a single part number and simplifies ordering for multi-cabinet jobs. The buttons...

The Chief DVAM5-1 is a kit of M5 mounting buttons for the TiLED universal direct-view LED mounting system. Buttons thread into the rear mounting holes of a dvLED cabinet and engage the TiLED wall mount, so the cabinet hangs securely and can be aligned tightly with its neighbors. Each panel uses four buttons, and this kit contains 4 buttons, enough for 1 panel. The single-panel pack is handy for small walls, spares or replacing hardware during service. The buttons provide 0.125 inches (3.2 mm)...

The Chief DVAM5-10 is a kit of M5 mounting buttons for the TiLED universal direct-view LED mounting system. Buttons thread into the rear mounting holes of a dvLED cabinet and engage the TiLED wall mount, so the cabinet hangs securely and can be aligned tightly with its neighbors. Each panel uses four buttons, and this kit contains 40 buttons, enough for 10 panels. Bulk packaging keeps larger video walls on a single part number and simplifies ordering for multi-cabinet jobs. The buttons provide...

The Chief DVAM5-25 is a kit of M5 mounting buttons for the TiLED universal direct-view LED mounting system. Buttons thread into the rear mounting holes of a dvLED cabinet and engage the TiLED wall mount, so the cabinet hangs securely and can be aligned tightly with its neighbors. Each panel uses four buttons, and this kit contains 100 buttons, enough for 25 panels. Bulk packaging keeps larger video walls on a single part number and simplifies ordering for multi-cabinet jobs. The buttons...

The Chief DVAM6-1 is a kit of M6 mounting buttons for the TiLED universal direct-view LED mounting system. Buttons thread into the rear mounting holes of a dvLED cabinet and engage the TiLED wall mount, so the cabinet hangs securely and can be aligned tightly with its neighbors. Each panel uses four buttons, and this kit contains 4 buttons, enough for 1 panel. The single-panel pack is handy for small walls, spares or replacing hardware during service. The buttons provide 0.125 inches (3.2 mm)...

The Chief DVAM6-10 is a kit of M6 mounting buttons for the TiLED universal direct-view LED mounting system. Buttons thread into the rear mounting holes of a dvLED cabinet and engage the TiLED wall mount, so the cabinet hangs securely and can be aligned tightly with its neighbors. Each panel uses four buttons, and this kit contains 40 buttons, enough for 10 panels. Bulk packaging keeps larger video walls on a single part number and simplifies ordering for multi-cabinet jobs. The buttons provide...

The Chief DVAM6-25 is a kit of M6 mounting buttons for the TiLED universal direct-view LED mounting system. Buttons thread into the rear mounting holes of a dvLED cabinet and engage the TiLED wall mount, so the cabinet hangs securely and can be aligned tightly with its neighbors. Each panel uses four buttons, and this kit contains 100 buttons, enough for 25 panels. Bulk packaging keeps larger video walls on a single part number and simplifies ordering for multi-cabinet jobs. The buttons...

The Chief DVAM8-1 is a kit of M8 mounting buttons for the TiLED universal direct-view LED mounting system. Buttons thread into the rear mounting holes of a dvLED cabinet and engage the TiLED wall mount, so the cabinet hangs securely and can be aligned tightly with its neighbors. Each panel uses four buttons, and this kit contains 4 buttons, enough for 1 panel. The single-panel pack is handy for small walls, spares or replacing hardware during service. The buttons provide 0.125 inches (3.2 mm)...

The Chief DVAM8-10 is a hardware kit of M8 mounting buttons for the TiLED Universal series of direct-view LED wall mounts. Chief packages 40 buttons per kit, which it rates as enough for 10 panels at four buttons per panel. The buttons are the attachment points that let dvLED cabinets with M8 threaded mounting points interface with the TiLED Universal starter and extender mounts, and Chief lists 0.125 in (3.2 mm) of adjustment for the hardware. The parts carry a clear zinc finish. Ordering...

The Chief DVAM8-25 is a hardware kit of M8 mounting buttons for the TiLED Universal series of direct-view LED wall mounts. Chief packages 100 buttons per kit, which it rates as enough for 25 panels at four buttons per panel. The buttons are the attachment points that let dvLED cabinets with M8 threaded mounting points interface with the TiLED Universal starter and extender mounts, and Chief lists 0.125 in (3.2 mm) of adjustment for the hardware. The parts carry a clear zinc finish. Ordering...

The Chief DVM0250U1E is a extender unit in the TiLED Universal series of direct-view LED (dvLED) wall mounts. It is built for 250mm-tall dvLED panels stacked one high, which Chief classes as 250/500/750/1000mm Class. It is designed to be added beside a matching TiLED Universal Starter (same panel size and stack height) to widen the wall by another column; it is not meant to start a wall on its own. The structure mounts to the wall at a minimum depth of 2 in (5.1 cm), keeping the finished LED...

The Chief DVM0270U1E is a extender unit in the TiLED Universal series of direct-view LED (dvLED) wall mounts. It is built for 270mm-tall dvLED panels stacked one high, which Chief classes as 43" Class (960mm W x 540mm H). It is designed to be added beside a matching TiLED Universal Starter (same panel size and stack height) to widen the wall by another column; it is not meant to start a wall on its own. The structure mounts to the wall at a minimum depth of 2 in (5.1 cm), keeping the finished...

The Chief DVM0500U2 is a starter unit in the TiLED Universal series of direct-view LED (dvLED) wall mounts. It is built for 500mm-tall dvLED panels stacked two high, which Chief classes as 250/500/750/1000mm Class. Use it as the first column of a TiLED Universal video wall; matching Extenders of the same panel size and stack height are added beside it to widen the wall. The structure mounts to the wall at a minimum depth of 2 in (5.1 cm), keeping the finished LED wall close to the surface, and...

The Chief DVM0500U2E is a extender unit in the TiLED Universal series of direct-view LED (dvLED) wall mounts. It is built for 500mm-tall dvLED panels stacked two high, which Chief classes as 250/500/750/1000mm Class. It is designed to be added beside a matching TiLED Universal Starter (same panel size and stack height) to widen the wall by another column; it is not meant to start a wall on its own. The structure mounts to the wall at a minimum depth of 2 in (5.1 cm), keeping the finished LED...

The Chief DVM0500U3 is a starter unit in the TiLED Universal series of direct-view LED (dvLED) wall mounts. It is built for 500mm-tall dvLED panels stacked three high, which Chief classes as 250/500/750/1000mm Class. Use it as the first column of a TiLED Universal video wall; matching Extenders of the same panel size and stack height are added beside it to widen the wall. The structure mounts to the wall at a minimum depth of 2 in (5.1 cm), keeping the finished LED wall close to the surface,...

The Chief DVM0500U3E is a extender unit in the TiLED Universal series of direct-view LED (dvLED) wall mounts. It is built for 500mm-tall dvLED panels stacked three high, which Chief classes as 250/500/750/1000mm Class. It is designed to be added beside a matching TiLED Universal Starter (same panel size and stack height) to widen the wall by another column; it is not meant to start a wall on its own. The structure mounts to the wall at a minimum depth of 2 in (5.1 cm), keeping the finished LED...

The Chief DVM0540U2 is a starter unit in the TiLED Universal series of direct-view LED (dvLED) wall mounts. It is built for 540mm-tall dvLED panels stacked two high, which Chief classes as 43" Class (960mm W x 540mm H). Use it as the first column of a TiLED Universal video wall; matching Extenders of the same panel size and stack height are added beside it to widen the wall. The structure mounts to the wall at a minimum depth of 2 in (5.1 cm), keeping the finished LED wall close to the...