Automation

The Luxul SW-615-48P-F is a 52-Port (48 PoE+) Gigabit Managed Switch with 4 SFP+ Ports from the Luxul line, sold here for professional AV and smart-home installations.Luxul networking gear is commonly specified for residential and commercial AV projects where reliable wired and wireless networks are required.

The On-Q CPT306WV1 (In-Wall TV Power and Cable Management Kit, White) is part of the Legrand On-Q structured wiring line for residential and light-commercial installs.Category: Power & Cable Management / In-Wall Cable Management.

The On-Q HT2004WHV1 (Dual Cable Access Kit) is part of the Legrand On-Q structured wiring line for residential and light-commercial installs.Category: Power & Cable Management / In-Wall Cable Management.

The On-Q HT2102BKV1 (In-Wall TV Connection Kit Black) is part of the Legrand On-Q structured wiring line for residential and light-commercial installs.Category: Power & Cable Management / In-Wall Cable Management.

The On-Q HT2102WHV1 (In-Wall TV Connection Kit White) is part of the Legrand On-Q structured wiring line for residential and light-commercial installs.Category: Power & Cable Management / In-Wall Cable Management.

The On-Q HT21USBWHV1 (In Wall TV Connection Kit with USB White) is part of the Legrand On-Q structured wiring line for residential and light-commercial installs.Category: Power & Cable Management / In-Wall Cable Management.

The On-Q HT2302BWH (In-Wall Power & Cable Management TV Connection Kit - New Con) is part of the Legrand On-Q structured wiring line for residential and light-commercial installs.Category: Power & Cable Management / In-Wall Cable Management.

The On-Q HT2302KWH (In-Wall Power & Cable Management TV Connection Kit - New Con) is part of the Legrand On-Q structured wiring line for residential and light-commercial installs.Category: Power & Cable Management / In-Wall Cable Management.

The QSC Core 510i is a rack-mount integrated Core processor for the Q-SYS platform, and the CTO (Configure-To-Order) designation means the chassis is ordered as a base unit to be populated with the audio I/O cards a project requires. It is designed for medium-to-large AV&C systems—corporate, higher-ed, venue and multi-zone installs—that need substantial on-board processing plus flexible local connectivity.Key FeaturesIntegrated Q-SYS Core with high native channel capacity (256...

The Russound CB-140 is the connecting block at the centre of an infrared repeater system. It lets a remote control work equipment that is hidden in a cabinet, closet or rack in another location. An IR receiver mounted where the remote is aimed, such as a Russound SLM-1 on a TV bezel or an 854 tabletop receiver, plugs into the block. The CB-140 then sends the received commands out to up to four emitter jacks. Each jack can drive a single IRE-1 emitter for one component, or a dual IRE-2 emitter...

The Russound CB-PS is the matching power supply for the CB-140 IR connecting block. The CB-140 has no internal supply, so this adapter (or an equivalent 12-volt source) is needed for the IR repeater system to work. It delivers a regulated 12 volts DC at up to 500 milliamps from a transformer that plugs directly into a wall outlet, and carries the power to the equipment over a 3-foot (1 m) cord that ends in a 2.1 mm coaxial plug. Regulated output keeps the voltage steady. While Russound...

The Russound IRE-1 is a single-head infrared emitter, the final link in an IR repeater system. It carries the commands collected by a remote IR receiver to one piece of AV equipment, such as a cable box, disc player or streamer, that sits out of sight in a cabinet or rack. The small emitter head attaches over the component's IR window with an adhesive pad and is low enough to go unnoticed. An IR blocking cover is supplied to keep direct remote signals or room light from reaching the sensor and...

The Russound IRE-2 is a dual-head infrared emitter for IR repeater systems. A single 3.5 mm plug splits to two small emitter heads, so one emitter output on a Russound CB-140 connecting block can control two pieces of equipment, which is how the CB-140 reaches up to eight components from its four outputs. Each head sticks over a component's IR sensor with an adhesive pad and has a low profile that stays out of sight. IR blocking covers are included to shield the sensors from direct remote...

The Russound SLM-1 is a compact infrared receiver for the front end of an IR repeater system. It mounts on the surface of a TV bezel, wall, shelf or cabinet face, wherever the remote is normally pointed, and passes the commands back to a connecting block that drives emitters on the hidden equipment. The body is only about a quarter-inch thick, so it sits discreetly on today's thin displays. Reception is wideband, covering 36 to 58 kHz carrier frequencies, and wide-angle, so it works with most...

The Russound SLM-1K packages a full infrared repeater system so a remote can keep controlling equipment that has been moved out of sight. At the viewing location, the slim SLM-1 receiver mounts on or near a TV bezel and picks up commands from almost any IR remote. Its wideband reception is designed to ignore the noise from LED, LCD and plasma screens and from fluorescent and compact fluorescent lamps, a common source of IR repeater problems. The receiver's cord runs back to the CB-140...