Automation

The Blustream HEX70CS-KIT is the 70m member of the CSC extender family, for typical room-to-rack distances. Its receiver can down-convert 4K 60Hz 4:4:4 for displays that only accept 4:2:0 or 1080p while the transmitter loop-out keeps full 4K for a local screen.Key FeaturesHDMI 2.0 18Gbps including HDR4K 60Hz 4:4:4 up to 40m, 1080p up to 70mSupports VGA to WUXGA and 480i to 4KHDMI loop-out on the transmitterBitstream pass-through of multichannel and object-based audioHDMI re-clocking on the...

The Blustream HEX70CS-RX is the receiver from the HEX70CS set, sold on its own for use with a HEX70CS-TX or a compatible Blustream HDBaseT matrix. It drives the display over HDMI, breaks audio out for a local amplifier and carries IR and RS-232 between the two ends.Key FeaturesHDMI 2.0 18Gbps including HDR4K 60Hz 4:4:4 up to 40m, 1080p up to 70mSupports VGA to WUXGA and 480i to 4KBitstream pass-through of multichannel and object-based audioHDMI re-clocking and advanced EDID managementAnalogue...

The Blustream HEX70CS-TX is the transmitter from the HEX70CS set, sold on its own as a spare or to pair with any compatible Blustream HDBaseT receiver. Its HDMI loop-out feeds a local screen at full resolution while the HDBaseT output sends video, control and power to the far end.Key FeaturesHDMI 2.0 18Gbps including HDRAdvanced colour space conversion4K 60Hz 4:4:4 up to 40m, 1080p up to 70mSupports VGA to WUXGA and 480i to 4KBitstream pass-through of multichannel and object-based audioOne...

The Blustream HEX70HDUK-KIT is a meeting-room extender that accepts laptops on HDMI, USB-C or DisplayPort, switches between them and a local source at the display, and extends USB so a room camera, speakerphone or touch screen works with the connected computer. The receiver can switch the display on and off by CEC or RS-232.Key FeaturesHDBaseT video and audio over one CAT cable with HDR supportTX inputs: 1 x HDMI, 1 x USB-C, 1 x DisplayPort, manual or auto selectionRX local HDMI inputUSB-C up...

The Blustream HEX70HDUK-TT turns the HEX70HDUK transmitter into a flush in-table connection point. Users lift the hinged canopy to reach the HDMI, USB-C, DisplayPort and USB ports, while the cable lacer bar keeps the wiring underneath tidy. The HEX70HDUK-KIT is not included.Key FeaturesIn-desk enclosure for boardroom tablesBlack brushed aluminium faceplateDiscreet hinged canopyCable management lacer barTable top mounting brackets and wing-nut boltsCut template includedIdeal ApplicationsBoardroo...

The Blustream HEX70SL-KIT is a compact, cost-effective HDBaseT set for everyday HDMI runs. The thin units tuck behind a TV or into furniture, power travels over the CAT cable from a single supply, and IR pass-through lets a remote control the source from the display location.Key FeaturesUncompressed video and audio with zero latencySlimline chassis1080p up to 70m over a single CAT cable4K up to 40m: 3840 x 2160 at 30Hz 4:4:4, 4096 x 2160 at 24Hz 4:4:4, 4K 60Hz 4:2:0Supports VGA to WUXGA and...

The Blustream HEX70SL-RX is the receiver from the HEX70SL set, sold separately as a spare or to pair with a compatible Blustream HDBaseT transmitter or matrix. It is usually powered over the CAT cable from the other end, so no local supply is needed behind the display.Key FeaturesUncompressed video and audio with zero latencySlimline chassis1080p up to 70m over a single CAT cable4K up to 40m: 3840 x 2160 at 30Hz 4:4:4, 4096 x 2160 at 24Hz 4:4:4, 4K 60Hz 4:2:0Supports VGA to WUXGA and 480i to...

The Blustream HEX70SL-TX is the transmitter from the HEX70SL set, sold separately as a spare or to pair with a compatible Blustream HDBaseT receiver. Its slim body fits behind a source or in a cabinet, and it can be powered over the CAT cable from the far end.Key FeaturesUncompressed video and audio with zero latencySlimline chassis1080p up to 70m over a single CAT cable4K up to 40m: 3840 x 2160 at 30Hz 4:4:4, 4096 x 2160 at 24Hz 4:4:4, 4K 60Hz 4:2:0Supports VGA to WUXGA and 480i to...

The Blustream HEX70USB-KIT extends a computer's HDMI and USB to a remote display, so keyboards, mice, touch screens or cameras at the screen work as if they were plugged into the PC. IR, RS-232 and power share the same CAT cable, and the receiver breaks audio out for a local amplifier.Key FeaturesUncompressed video and audio with zero latency1080p up to 70m, 4K up to 40m: 3840 x 2160 at 30Hz 4:4:4, 4096 x 2160 at 24Hz 4:4:4, 4K 60Hz 4:2:0USB 2.0: 1 x USB-B host at TX, 4 x USB-A peripherals at...

The Blustream HMX44-18G-KIT is a four-zone matrix that sends full 18Gbps HDMI 2.0 to every room without compression, including HDR10 and HDR10+. Each supplied RX18G receiver gets video, power, IR, RS-232 and gigabit network on one CAT6A cable, and a separate audio matrix lets any source or returned TV audio play in any zone.Key FeaturesUncompressed, unconverted HDMI 2.0 18Gbps over HDBaseT34K 60Hz 4:4:4 up to 100m, HDR10 and HDR10+Video smart scaling on HDBaseT outputs14x4 audio matrix: 4...

The Blustream HMX88-18G is an eight-zone uncompressed HDBaseT3 matrix for large homes and commercial sites that want full 18Gbps 4K HDR in every room. It powers compatible receivers over the CAT6A cable and carries IR, RS-232 and gigabit network to each zone. HDBaseT receivers are not included; pair with RX18G receivers.Key FeaturesUncompressed, unconverted HDMI 2.0 18Gbps over HDBaseT34K 60Hz 4:4:4 up to 100m, HDR10 and HDR10+Video smart scaling on HDBaseT outputs26x8 audio matrix: 8 input...

The Blustream HMXL42ARC-KIT is a compact two-zone matrix for homes and small commercial spaces. It switches four HDMI sources to two displays, scales video down for lower-resolution screens and brings TV audio back through ARC, with an independent audio matrix for each zone. Both receivers are included and powered from the matrix.Key FeaturesColour space conversion supporting HDMI 2.0 18Gbps including HDR4 HDMI inputs independently routed to 2 HDBaseT outputs4K 60Hz 4:4:4 up to 40m, 1080p up...

The Blustream HMXL44ARC-KIT is a 4x4 HDMI 2.0 matrix that sends video, bi-directional IR and power to each zone over one CAT cable using HDBaseT. Colour space conversion lets the system carry 4K 60Hz 4:4:4 sources up to 40m, and Smart Scaling on the HDBaseT outputs means a 1080p or 4K 4:2:0 display in one room does not hold back the 4K displays elsewhere. An independent audio matrix with ARC pulls TV audio back from each zone for distribution to amplifiers or soundbars.Key FeaturesHDMI 2.0...

The Blustream HMXL88ARC brings eight HDMI 2.0 sources to eight HDBaseT zones over single CAT cables. Colour space conversion keeps 4K 60Hz 4:4:4 content intact up to 40m, and Smart Scaling on each HDBaseT output lets lower-resolution displays share the system without limiting the 4K screens. The 26x8 audio matrix runs independently of video and accepts HDMI or optical ARC from every zone when paired with RX70CS receivers.Key FeaturesHDMI 2.0 18Gbps with HDR, HDCP 2.2 compliantSimultaneous HDMI...

The Blustream HSP14CS-V2 splits one HDMI 2.0 4K 60Hz 4:4:4 source to four HDBaseT outputs, sending video, IR and power to each receiver over a single CAT cable. Each output can be downscaled independently, so 1080p and 4K 4:2:0 screens can share a source with full 4K displays. An HDMI loop out feeds a local display, and the audio breakout outputs run at the same time for feeding amplifiers or soundbars.Key FeaturesHDMI 2.0 18Gbps with HDR through CSC, HDCP 2.2Bitstream passthrough of...

The Blustream IP200UHD-RX is the receiver for the IP200 multicast platform. It decodes visually lossless compressed HDMI from IP200 and IP250 transmitters over a 1Gb network switch, scales the picture to suit the attached display, and passes IR, RS-232 and USB/KVM back toward the source. It can run from PoE or a local supply and supports four operating modes, two of which need no switch at all.Key FeaturesHDCP 2.2 with advanced EDID managementUp and down scaling for mixed displays2 x USB Type...

The Blustream IP200UHD-TX encodes an HDMI source with visually lossless compression for distribution over a 1Gb network switch. Pair it with IP200UHD-RX or IP250UHD-RX receivers to build a matrix or video wall of almost any size, or connect transmitter and receiver directly as an extender. IR, RS-232 and USB/KVM travel alongside the video.Key FeaturesHDCP 2.2 compliantSupported sources: 3840 x 2160 at 30Hz 4:4:4, 4096 x 2160 at 24Hz 4:4:4, 4K 60Hz 4:2:0USB Type B host port for KVM (bulk-mode...

The Blustream IP250UHD-RX adds Dante audio networking to the IP200 video over IP platform. It decodes HDMI from IP200 and IP250 transmitters with one frame of latency, scales to the attached display, and can place audio onto, or take it from, a Dante network. Dual RJ45 ports let video and Dante share one network or run on separate ones, and an SFP cage extends reach over fibre.Key FeaturesHDCP 2.2 compliantCompatible with existing IP200UHD products2 x USB Type A for KVM (bulk-mode devices...

The Blustream IP250UHD-TX encodes HDMI for a 1Gb managed network and adds Dante audio, so source audio can be shared with a Dante system or Dante audio embedded into the video stream. It works with the IP200 platform and existing IP200UHD receivers. A local HDMI loop-out, dual RJ45 ports and an SFP cage give flexibility for both small and large systems.Key FeaturesAccepts 3840 x 2160 at 30Hz 4:4:4, 4096 x 2160 at 24Hz 4:4:4 and 4K 60Hz 4:2:0HDR input at 4K 30, 25 and 24HzHDCP 2.2 with EDID...

The Blustream IP300UHD-RX is the receiver for the IP300 series, which distributes 18Gbps HDMI 2.0 over a 1Gb managed network with about one frame of latency. Its 18Gbps scaling chipset lets it feed older displays and build video walls, and it interoperates with IP350UHD Dante models. A second RJ45 port supports daisy-chaining and an SFP cage allows fibre runs beyond 100m.Key FeaturesHDCP 2.2 compliantSupports Dolby Atmos, Dolby TrueHD, Dolby Digital Plus and DTS-HD Master Audio2 x USB 2.0...

The Blustream IP300UHD-TX encodes an 18Gbps HDMI 2.0 source for multicast distribution over a 1Gb managed network with about one frame of latency. It interoperates with the IP350UHD Dante models, so a system can grow into networked audio. The local HDMI loop-out, analogue audio embedding and an SFP cage for fibre make it suited to both residential and commercial installs.Key FeaturesHDCP 2.2 with advanced EDID managementSupports Dolby Atmos, Dolby TrueHD, Dolby Digital Plus and DTS-HD Master...

The Blustream IP300UHD-WP-TX puts an IP300 series transmitter into a dual US Decora wall plate, giving meeting rooms and lecterns a clean HDMI and USB-C connection point. Sources are switched manually or automatically and sent over a 1Gb managed network to IP300 or IP350 receivers. Note that the USB-C input carries video through DisplayPort Alt Mode only and does not carry USB data.Key FeaturesBitstream passthrough of multichannel and object-based audio formatsRequires a 1Gb network switch for...

The Blustream IP350UHD-RX is the Dante-equipped receiver for the IP300 video over IP system. It delivers 18Gbps HDMI with about one frame of latency, scales for any display, and can return audio from the display through ARC, eARC or optical. LAN2 lets the Dante network run separately from the video network, and an SFP cage supports fibre runs.Key FeaturesHDCP 2.2 compliantMultichannel bitstream passthrough including object-based formatsMatrix, video wall, one-to-one and one-to-many...

The Blustream IP350UHD-TX is the Dante-equipped transmitter for the IP300 series. It encodes 18Gbps HDMI 2.0 for a 1Gb managed network with about one frame of latency, while its Dante interface shares source audio with networked DSPs and amplifiers. Video and Dante can share one network or be split across the second RJ45 port, and the SFP cage supports fibre runs.Key FeaturesHDCP 2.2 with EDID managementSupports Dolby Atmos, Dolby TrueHD, Dolby Digital Plus and DTS-HD Master AudioOLED front...