Transmitters & Receivers

The Blustream IP200UHD-RX is the receiver for the IP200 multicast platform. It decodes visually lossless compressed HDMI from IP200 and IP250 transmitters over a 1Gb network switch, scales the picture to suit the attached display, and passes IR, RS-232 and USB/KVM back toward the source. It can run from PoE or a local supply and supports four operating modes, two of which need no switch at all.Key FeaturesHDCP 2.2 with advanced EDID managementUp and down scaling for mixed displays2 x USB Type...

The Blustream IP200UHD-TX encodes an HDMI source with visually lossless compression for distribution over a 1Gb network switch. Pair it with IP200UHD-RX or IP250UHD-RX receivers to build a matrix or video wall of almost any size, or connect transmitter and receiver directly as an extender. IR, RS-232 and USB/KVM travel alongside the video.Key FeaturesHDCP 2.2 compliantSupported sources: 3840 x 2160 at 30Hz 4:4:4, 4096 x 2160 at 24Hz 4:4:4, 4K 60Hz 4:2:0USB Type B host port for KVM (bulk-mode...

The Blustream IP250UHD-RX adds Dante audio networking to the IP200 video over IP platform. It decodes HDMI from IP200 and IP250 transmitters with one frame of latency, scales to the attached display, and can place audio onto, or take it from, a Dante network. Dual RJ45 ports let video and Dante share one network or run on separate ones, and an SFP cage extends reach over fibre.Key FeaturesHDCP 2.2 compliantCompatible with existing IP200UHD products2 x USB Type A for KVM (bulk-mode devices...

The Blustream IP250UHD-TX encodes HDMI for a 1Gb managed network and adds Dante audio, so source audio can be shared with a Dante system or Dante audio embedded into the video stream. It works with the IP200 platform and existing IP200UHD receivers. A local HDMI loop-out, dual RJ45 ports and an SFP cage give flexibility for both small and large systems.Key FeaturesAccepts 3840 x 2160 at 30Hz 4:4:4, 4096 x 2160 at 24Hz 4:4:4 and 4K 60Hz 4:2:0HDR input at 4K 30, 25 and 24HzHDCP 2.2 with EDID...

The Blustream IP300UHD-RX is the receiver for the IP300 series, which distributes 18Gbps HDMI 2.0 over a 1Gb managed network with about one frame of latency. Its 18Gbps scaling chipset lets it feed older displays and build video walls, and it interoperates with IP350UHD Dante models. A second RJ45 port supports daisy-chaining and an SFP cage allows fibre runs beyond 100m.Key FeaturesHDCP 2.2 compliantSupports Dolby Atmos, Dolby TrueHD, Dolby Digital Plus and DTS-HD Master Audio2 x USB 2.0...

The Blustream IP300UHD-TX encodes an 18Gbps HDMI 2.0 source for multicast distribution over a 1Gb managed network with about one frame of latency. It interoperates with the IP350UHD Dante models, so a system can grow into networked audio. The local HDMI loop-out, analogue audio embedding and an SFP cage for fibre make it suited to both residential and commercial installs.Key FeaturesHDCP 2.2 with advanced EDID managementSupports Dolby Atmos, Dolby TrueHD, Dolby Digital Plus and DTS-HD Master...

The Blustream IP300UHD-WP-TX puts an IP300 series transmitter into a dual US Decora wall plate, giving meeting rooms and lecterns a clean HDMI and USB-C connection point. Sources are switched manually or automatically and sent over a 1Gb managed network to IP300 or IP350 receivers. Note that the USB-C input carries video through DisplayPort Alt Mode only and does not carry USB data.Key FeaturesBitstream passthrough of multichannel and object-based audio formatsRequires a 1Gb network switch for...

The Blustream IP350UHD-RX is the Dante-equipped receiver for the IP300 video over IP system. It delivers 18Gbps HDMI with about one frame of latency, scales for any display, and can return audio from the display through ARC, eARC or optical. LAN2 lets the Dante network run separately from the video network, and an SFP cage supports fibre runs.Key FeaturesHDCP 2.2 compliantMultichannel bitstream passthrough including object-based formatsMatrix, video wall, one-to-one and one-to-many...

The Blustream IP350UHD-TX is the Dante-equipped transmitter for the IP300 series. It encodes 18Gbps HDMI 2.0 for a 1Gb managed network with about one frame of latency, while its Dante interface shares source audio with networked DSPs and amplifiers. Video and Dante can share one network or be split across the second RJ45 port, and the SFP cage supports fibre runs.Key FeaturesHDCP 2.2 with EDID managementSupports Dolby Atmos, Dolby TrueHD, Dolby Digital Plus and DTS-HD Master AudioOLED front...

The Blustream IP50HD-RX is the receiver for the Contractor Series IP50 platform, an affordable way to distribute 1080p HDMI over standard 100Mbps network infrastructure. It decodes H.265 video from IP50HD-TX transmitters, scales it to the attached display, and passes IR, RS-232 and USB/KVM. It can run as part of a networked matrix or as a direct point-to-point extender.Key FeaturesLatency of 3 frames (under 120ms, depending on compression, frame rate and scaling)PCM 2.0 channel audioMatrix...

The Blustream IP50HD-TX is the transmitter for the Contractor Series IP50 platform. It compresses a 1080p HDMI source with H.265 so it can travel over ordinary 100Mbps network infrastructure, unicast on unmanaged networks or multicast on managed ones. A zero-latency HDMI loop-out feeds a local display, and IR, RS-232 and USB/KVM travel with the video.Key FeaturesLatency of 3 frames (under 120ms), none on the loop-outPCM 2.0 channel audioMatrix distribution through a 100Mbps switch, or...

The Blustream IP510UHD-TZ is an SDVoE video over IP transceiver for 10Gb managed networks. Each unit has both an HDMI input and an HDMI output, so it can act as a transmitter and receiver at the same time. It passes 4K 60Hz 4:4:4 HDMI 2.0 with HDR, multichannel audio and control signals, and supports matrix switching, video walls and multiview, or works as a direct one-to-one extender without a switch.Key FeaturesDolby Vision and HDR require Genlock modeSupports Dolby Atmos, Dolby TrueHD,...