Automation

The Blustream CUSTOMPRO-HUB is the chassis at the core of the Custom Pro modular matrix range. Installers choose the Custom Pro input, output and control boards that suit each project, so the same hub can become an HDMI, HDBaseT or mixed 8x8 system with options such as audio breakout, simultaneous HDBaseT/HDMI outputs and RS-232 pass-through.A rugged housing and interlocking board design simplify installation and servicing. Input and output boards are separate Blustream products and are not...

The Blustream Custom Pro HUB16 is the 4U chassis at the heart of the Custom Pro modular matrix family. Rather than a fixed I/O count, it lets the installer build the switcher a project needs by fitting 2-way and 4-way input and output boards plus optional control and audio boards in its 12 bays, up to a full 16x16 HDBaseT matrix. The interlocking board design keeps installation and later servicing simple.Key FeaturesUp to 16 video inputs and 16 video outputs using interchangeable 2-way and...

The Blustream DA11ABL-WP-US-V2 is a wall plate interface that lets guests and presenters stream audio from a phone or laptop into a Dante system. It encodes 2 channels from Bluetooth or an unbalanced 3.5mm input to Dante, and also decodes 2 Dante channels back to unbalanced RCA outputs for local use. It installs in a US single-gang junction box and is powered from a PoE switch, with a 12V input as a fallback.Key FeaturesConverts 2ch Bluetooth or unbalanced analog audio to DanteDecodes 2 Dante...

The Blustream DA11ARC takes the audio return channel from a display's HDMI ARC port and places it on a Dante network, so TV sound can be sent to Dante amplifiers, DSPs and zones elsewhere in a building. It handles 2-channel ARC audio only and is not compatible with multichannel HDMI audio codecs.Key Features2ch HDMI ARC to Dante encodingSample rates of 44.1, 48 and 96kHz at 24-bitConfigurable Dante latency of 2, 3, 4, 5 or 10ms in Dante ControllerInput sensitivity and volume set through CEC,...

The Blustream DA11XLR brings microphones and balanced line sources onto a Dante network through two XLR inputs. Each input can supply 48V phantom power for condenser microphones, and levels are set per input. It runs from a PoE switch or a local 12V supply and has a built-in web GUI.Key FeaturesTwo XLR inputs accepting balanced, unbalanced or mic-level sourcesSwitchable 48V/0.5mA phantom power per inputMic/line sensitivity +24dBu to -28dBV per inputSample rates of 44.1, 48, 88.2 and 96kHz at...

The Blustream DA1414 is a compact audio matrix that brings Dante, analog and USB audio together in one 1U unit. Every channel can be routed in mono, so it can act as a 14x14 matrix with full processing on each input and output. Dante channels can also be switched by API from third-party control systems.Key Features8 x Dante/AES67, 4 x balanced/unbalanced analog and 2 x USB inputs, with matching outputsMono separation for up to 14x14 independent audio feedsBalanced and unbalanced analog inputs...

The Blustream DA22DIG is a two-way converter between Dante and both analog and S/PDIF digital audio. Inputs are chosen between analog, optical and coaxial with dip switches, and Dante returns are output on analog and digital connections together. It is set up with rotary dials and switches rather than software.Key FeaturesEncodes 2ch analog or digital audio to Dante and decodes Dante to 2ch analog and digitalDigital input selectable between optical Toslink and coaxial RCAConfigurable mic input...

The Blustream DA22OPT links optical digital audio equipment, such as TVs, streamers and soundbars, with a Dante network. It has an optical input and an optical output, so one unit can send a source onto Dante and return a Dante stream to an optical-input device. Routing is handled by binding connections in Dante Controller.Key Features2ch optical S/PDIF to Dante encoding and Dante to optical decodingRouting set by Dante Controller subscriptionsSample rates of 44.1, 48, 88.2 and 96kHz at 16, 24...

The Blustream DA44AU is a 4-in, 4-out bridge between analog audio and Dante. It lets mixing consoles, amplifiers, computers and Blustream matrix products join a Dante network and returns Dante channels to analog equipment, with mic-level inputs and phantom power for microphones.Key Features4 analog inputs converted to Dante and 4 Dante signals converted to analog outputsBalanced and unbalanced audio with mic or line-level inputs48V phantom power on mic/line inputsSample rates of 44.1, 48 and...

The Blustream DAC12AU is a small digital to analog converter for connecting a TV or other source with a digital audio output to an amplifier or powered speakers with analog inputs. It also passes the signal to a coaxial digital output, so optical can be converted to coax at the same time.Key FeaturesConverts optical or coaxial digital audio to analog stereo L/RConverts optical input to coaxial digital outputAuto-detects the active input, with optical given priorityCoaxial digital and analog...

The Blustream DAC13DB solves a common problem in multi-room and commercial systems: a TV or source that only outputs surround sound in Dolby or DTS. It downmixes the 5.1 channel bitstream to stereo so 2-channel amplifiers and zones get full audio, with the result available on digital and analog outputs together.Key FeaturesDownmixes 5.1ch Dolby Audio and DTS Audio from optical or coaxial input to 2ch stereoSupports Dolby Audio technologyDownmixed audio output on analog, optical and coaxial at...

The Blustream DIG11AU is a simple digital audio bridge for connecting optical sources to coaxial inputs, or coaxial sources to optical inputs. Because both outputs run at once, it can also feed two devices from a single digital source.Key FeaturesConverts optical to optical and coax, or coax to optical and coaxBoth outputs work at the same time regardless of the selected inputSample rates of 32, 44.1, 48, 96 and 192kHz, up to 24-bitPlug and play operationWall-mounting wings includedIdeal...

The Blustream DMP168 is a digital audio matrix built for multizone systems that mix analog and digital sources. Each input and output has its own processing, outputs can be grouped into zones, and events can be triggered by audio sensing, contact closures or trigger inputs.Key Features8 analog L/R, 4 coaxial and 4 optical inputs switched to 8 analog L/R outputsChannel separation for up to 32x16 audio feedsVolume, balance, shelf and pass filters and 4-band parametric EQ per input and output8...

The Blustream FVE4K-KIT extends 4K HDMI over fiber when the run is too long for copper. Using SDVoE technology it carries 18Gbps video with visually lossless compression and zero latency, plus USB, Ethernet and control. Reach depends on the 10Gbps SFP+ modules and fiber chosen; the modules are not included.Key FeaturesHDMI 2.0 up to 4K 60Hz 4:4:4 with 10/12-bit HDR including Dolby Vision18Gbps video over 10Gbps fiber with visually lossless compressionHDMI loop out on the FVE4K-TX for a local...

The Blustream HD11CTRL-V2 sits in the HDMI line between a source and a display and automates the room around it. When it senses a signal, or receives a trigger from a sensor, switch, RS-232, IR or IP, it can run macros that power the display on or off over CEC, RS-232, IR or IP and switch relays for items such as projector screens. It also helps with EDID, HDCP and handshake problems.Key FeaturesUp to 10 macros, each with up to 10 command functionsHDMI 2.0 (18Gbps) including HDR, up to 4K 60Hz...

The Blustream HD12DB-V2 lets one 4K source serve a surround-sound system and a stereo zone at the same time. The HDMI loop out passes the original video and multichannel audio to an AV receiver or soundbar, while the built-in DAC downmixes the audio to stereo for 2-channel zones and a second HDMI output can scale video to 1080p for older displays.Key FeaturesBuilt-in DAC converts 7.1ch Dolby Audio or DTS Audio to 2ch stereo, output on HDMI, optical and analog togetherSupports multichannel...

The Blustream HEX100CS-KIT is a matched HDBaseT transmitter and receiver for long HDMI runs. Colour space conversion lets the receiver down-convert 4K 60Hz 4:4:4 for older 4:2:0 or 1080p displays while the transmitter loop-out still feeds a local screen at full resolution. IR, RS-232 and power travel on the same cable, and the receiver provides analogue and coaxial audio outputs for a nearby amplifier or soundbar.Key FeaturesHDMI 2.0 18Gbps support including HDR4K 60Hz 4:4:4 up to 70m, 1080p...

The Blustream HEX100CS-RX is the receiver half of the HEX100CS set, sold on its own as a spare or for use with a compatible Blustream transmitter or matrix. It outputs HDMI to the display and breaks the audio out to analogue and coaxial connections, while carrying IR and RS-232 back to the source end.Key FeaturesHDMI 2.0 18Gbps including HDR4K 60Hz 4:4:4 up to 70m, 1080p up to 100mSupports VGA to WUXGA and 480i to 4KBitstream pass-through of multichannel and object-based audioHDMI re-clocking...

The Blustream HEX11WP-TX-US puts an HDMI input in the wall and sends it over HDBaseT to any Blustream receiver or matrix. It installs in a standard US double-gang box, can take its power from the far end over the CAT cable, and passes RS-232 and IR so the display can be controlled from the room.Key FeaturesHDBaseT video and audio over a single CAT cable4K up to 40m: 3840 x 2160 at 30Hz 4:4:4, 4096 x 2160 at 24Hz 4:4:4, 4K 60Hz 4:2:01080p up to 70mBitstream pass-through of multichannel and...

The Blustream HEX150CS-KIT is the long-distance member of the CSC extender family. It reaches 100m at 4K 60Hz 4:4:4 and 150m at 1080p, returns display audio to the source end over ARC, and shares a network connection between the two ends, all on a single CAT cable.Key FeaturesHDMI 2.0 18Gbps including HDR, with output down-conversion4K 60Hz 4:4:4 up to 100m, 1080p up to 150mHDMI loop-out on the transmitterARC via HDMI and optical inputs, returned to HDMI, optical and analogue L/R (analogue is...

The Blustream HEX18G-KIT is a straightforward uncompressed HDBaseT3 extender for installs that need full 18Gbps HDMI 2.0 at the screen without the extra audio and USB features of the HEX18GARC. Video passes bit for bit with no colour conversion, and IR and RS-232 ride along on the same CAT6A cable.Key FeaturesUncompressed, unconverted 4K 60Hz 4:4:4HDR10 and HDR10+Up to 100m, depending on format, cable and environmentSupports VGA to WUXGA and 480i to 4KHDMI re-clocking at the receiverBitstream...

The Blustream HEX18GARC-KIT uses HDBaseT3 to carry a full 18Gbps HDMI 2.0 signal without compression or colour conversion. On top of the video it returns display audio with eARC and ARC, extends USB keyboard and mouse control, and shares gigabit Ethernet, IR and RS-232 between the two ends.Key FeaturesUncompressed, unconverted 4K 60Hz 4:4:4 over one CAT6A cableHDR10 and HDR10+ supportUp to 100m, depending on format, cable and environmentHDMI loop-out on the transmittereARC from the display,...

The Blustream HEX31WP-TX-US gives a meeting space laptop and HDMI connections in one double-gang wall plate and sends the selected source over HDBaseT to a Blustream receiver or matrix. It can switch automatically when a device is plugged in and has a button to turn the display on or off. Note the USB-C input does not charge connected devices.Key FeaturesTwo HDMI and one USB-C inputManual or automatic source selection, front panel and RS-232 switching4K up to 40m: 3840 x 2160 at 30Hz 4:4:4,...

The Blustream HEX70ARC-KIT extends HDMI to a display and sends the TV's own audio back to the equipment end, so a soundbar or AV receiver near the rack can play TV apps and broadcast sound. Video is uncompressed with zero latency, and IR and power share the same CAT cable.Key FeaturesUncompressed video and audio with zero latency1080p up to 70m over a single CAT cable4K up to 40m: 3840 x 2160 at 30Hz 4:4:4, 4096 x 2160 at 24Hz 4:4:4, 4K 60Hz 4:2:0Supports VGA to WUXGA and 480i to 4KARC via...