Audio & Video

The Russound ICG-6S converts a 6.5-inch Russound IC-Series in-ceiling speaker to a square look. It uses the same bezel-less NanoPerf magnetic design as the round grille that ships with the speakers, and sits close to the ceiling surface so the speaker reads as a subtle architectural detail.Because a square grille has to stay lined up with walls, tile and lighting, Russound includes grille brackets that keep it from rotating and prevent shadowing around the edges. Magnets hold the grille in...

The Russound ICG-8R is an 8-inch round NanoPerf grille for Russound IC-Series in-ceiling loudspeakers. It is the same round, bezel-less magnetic style that ships in the box with the 8-inch IC-Series speakers, so it is the direct replacement when a grille is damaged, lost or covered in construction overspray.The grille has no surrounding bezel and holds in place magnetically, so it can be removed and reseated without tools when the speaker needs to be adjusted or serviced. Choose the ICG-8R for...

The Russound ICG-8S converts an 8-inch Russound IC-Series in-ceiling speaker to a square look. It uses Russound's bezel-less NanoPerf magnetic design and is a grille accessory only; the speaker is purchased separately.Because a square grille must stay lined up with walls, tile or lighting, Russound includes grille brackets that keep it from rotating and prevent shadowing, so the edges stay parallel to the room. Square grilles suit modern interiors, coffered or grid ceilings and rooms with...

The Russound IW-620 is a 6.5-inch two-way in-wall speaker for whole-home audio and TV listening in the main rooms of a house. Each speaker combines an injection-molded polypropylene woofer with a 1-inch silk tweeter that pivots, so highs can be directed toward the couch even when the speaker sits high on a wall or off to the side of a screen.Russound rates the IW-620 at 47 Hz to 20 kHz with 90 dB sensitivity and a 5 to 100 watt recommended range. The woofer basket and baffle are a single...

The Russound MBX-AMP turns a pair of passive speakers into a networked streaming zone. It combines the MBX-PRE streaming engine with a built-in stereo amplifier rated at 50 watts per channel into 8 ohms, or 70 watts per channel into 4 ohms, in a compact chassis. It can sit on a shelf, go in an equipment closet, or mount to a wall with the included brackets.Supported sources include AirPlay 2 and Google Cast with full metadata, Bluetooth, popular streaming services and UPnP media on the home...

The Russound MBX-PRE is a small, line-level streaming player that adds modern network audio to almost any system. It has no built-in amplifier. Audio leaves through stereo RCA outputs, which can be set fixed or variable, and an optical digital output, so it can feed a Russound multiroom controller, an AV receiver or any power amplifier.Streaming support covers AirPlay 2 and Google Cast with full metadata, Bluetooth, popular internet music services and UPnP media on the local network, with...

The Russound MCA-66 is a centralized multiroom audio controller and amplifier that lets six rooms each pick from six shared sources. All six zones are amplified on board at 20 watts per channel into 8 ohms, so a single rack unit can drive in-ceiling or in-wall speakers throughout a home or small business without separate power amplifiers.Source connections include six stereo RCA line inputs plus three coaxial and one optical digital input (six sources maximum in total). Zones 1 and 2 also...

The Russound MIXAMP-60 is an all-in-one commercial mixer amplifier for background music and paging in small to mid-size businesses. A built-in transformer provides 70-volt and 100-volt constant-voltage outputs for long runs to many ceiling speakers, along with 4, 8 and 16-ohm taps for direct low-impedance loads, all from 60 watts of rated power. Three content sources are built in: a front-panel USB and SD card MP3 player, an FM tuner and a Bluetooth receiver, with an LCD showing the active...

The Russound P100BT is a 1U rack-mountable dual-source stereo power amplifier with built-in Bluetooth, designed to add a room, a patio or a larger space to any audio system. It is rated at 100 watts per channel into 4 ohms and 60 watts per channel into 8 ohms, and a rear switch bridges the channels for 200 watts into a single 8-ohm load. Its shallow 6.54-inch chassis suits tight racks and shelves. Two RCA line inputs manage source priority on their own: the main input carries the everyday...

The Russound P200BT is a 1U rack-mountable dual-source stereo power amplifier with built-in Bluetooth, designed to add a room, a patio or a larger space to any audio system. It is rated at 200 watts per channel into 4 ohms and 100 watts per channel into 8 ohms, and a rear switch bridges the channels for 400 watts into a single 8-ohm load. That headroom suits large rooms, outdoor areas and demanding speaker loads. Two RCA line inputs manage source priority on their own: the main input carries...

The Russound P75 is a two-channel Class A/B power amplifier built around flexible source handling. It accepts two line-level inputs and switches between them automatically by sensing which one is carrying signal, so a room can play a primary source and fall back to a second without user intervention. A loop-out repeats the Line 2 signal so the same source can continue on to another amplifier, receiver or zone. Output is rated at 75 watts per channel into 4 ohms and 60 watts per channel into 8...

The Russound PRO-12 HP is a central speaker selector for systems that need to run 12 rooms of speakers from one location. A front-panel A/B switch chooses which of two source amplifiers feeds all connected speakers, while individual room switches turn each zone on or off.Audiophile-grade autoformers handle impedance matching, and a rotary switch on the rear panel is set according to the number of speaker pairs in use, so the amplifier sees a safe load no matter how many rooms are active. The...

The Russound PRO-8 HP is a central speaker selector for systems that need to run 8 rooms of speakers from one location. A front-panel A/B switch chooses which of two source amplifiers feeds all connected speakers, while individual room switches turn each zone on or off.Audiophile-grade autoformers handle impedance matching, and a rotary switch on the rear panel is set according to the number of speaker pairs in use, so the amplifier sees a safe load no matter how many rooms are active. The HP...

The Russound SDB-4.1 puts room-by-room control of a 4-zone speaker system on one front panel. Two amplifier inputs are provided, and each speaker pair has its own A/B switch, so one room can listen to source A while another plays source B.Every zone also has a dedicated volume knob and an on/off switch. Because the on/off switch is separate from the volume control, a room can be shut off and turned back on at the same listening level. Autoformers provide the impedance matching that keeps the...

The Russound SDB-6.1 puts room-by-room control of a 6-zone speaker system on one front panel. Two amplifier inputs are provided, and each speaker pair has its own A/B switch, so one room can listen to source A while another plays source B.Every zone also has a dedicated volume knob and an on/off switch. Because the on/off switch is separate from the volume control, a room can be shut off and turned back on at the same listening level. Autoformers provide the impedance matching that keeps the...

This combo pairs the Russound SMZ16-PRE matrix preamplifier with the D1290 12-channel D-Series amplifier, the two halves of a Russound whole-home audio rack. The SMZ16-PRE brings the sources, built-in streaming and zone control; the D1290 supplies the amplifier channels for those zones.What You Get(1) Russound SMZ16-PRE, part 1550-853838(1) Russound D1290, part 2800-853913Full specifications, manuals and product guides are on the individual product pages for the SMZ16-PRE and the D1290. ...

This combo pairs the Russound SMZ16-PRE matrix preamplifier with the D1675 16-channel D-Series amplifier, the two halves of a Russound whole-home audio rack. The SMZ16-PRE brings the sources, built-in streaming and zone control; the D1675 supplies the amplifier channels for those zones.What You Get(1) Russound SMZ16-PRE, part 1550-853838(1) Russound D1675, part 2800-853920Full specifications, manuals and product guides are on the individual product pages for the SMZ16-PRE and the D1675. ...

This combo pairs the Russound SMZ16-PRE matrix preamplifier with the D890 8-channel D-Series amplifier, the two halves of a Russound whole-home audio rack. The SMZ16-PRE brings the sources, built-in streaming and zone control; the D890 supplies the amplifier channels for those zones.What You Get(1) Russound SMZ16-PRE, part 1550-853838(1) Russound D890, part 2800-853906Full specifications, manuals and product guides are on the individual product pages for the SMZ16-PRE and the D890. ...

The Russound SMZ16-PRE is a 16-source by 16-zone matrix preamplifier for large residential and light-commercial audio systems. Unlike the SMZ8, it has no internal amplification. All 16 zone outputs are line level and can be set fixed or variable, so the integrator can pick power amplifiers to suit each space, whether a stereo amp, a multichannel amp such as the Russound D-Series, or a 70V/100V amplifier for outdoor or commercial zones.The input section accepts up to 16 stereo sources, mixing...

The Russound SMZ8 is a centralized multiroom audio controller that combines an 8-source by 8-zone matrix, six zones of amplification and a hi-res network streamer in one chassis for shelf or 19-inch rack mounting. Zones 1 through 6 are driven by Class D amplifiers rated at 50 watts per channel into 8 ohms, and each output accepts a load down to 4 ohms, so two pairs of 8-ohm speakers can share a zone. Zones 7 and 8 are line-level outputs that can be set fixed or variable to feed an external...

The Russound SS-4.2 is a single-source speaker selector for distributing one stereo amplifier to up to four rooms or speaker zones. Each pair gets its own front-panel switch, so listeners can turn areas on and off without touching the amplifier. A rear-panel switch chooses how the unit handles amplifier loading. With internal impedance matching engaged, the selector keeps the combined load within a safe range and adds automatic overload protection, which makes it a good partner for...

The Russound SS-6.2 lets a single stereo amplifier or receiver drive up to six pairs of speakers, with an individual on/off switch for each zone on the front panel. It is the larger sibling of the SS-4.2 and suits homes or small businesses where background music needs to reach more areas than a basic A/B switch can handle. A rear-panel mode switch sets how the amplifier load is managed. In impedance-matching mode the selector's internal circuitry keeps the combined speaker load safe for the...

The Russound V-KP-1 packs a streaming player, a voice assistant and a stereo amplifier into a Decora-style wall keypad. Part of the VoicePlay family, it has Amazon Alexa built in, so a room can ask for music, news and smart-home control without a separate smart speaker, and it joins Alexa multi-room music groups with other devices. Spotify Connect, Apple AirPlay 2 and Bluetooth 5.0 provide additional ways to stream from a phone or tablet. The integrated amplifier delivers 15 watts to each of...

The Russound V-PS-2 is the companion power supply for the VoicePlay V-KP-1 amplified keypad with Alexa Built-in. Each V-KP-1 contains its own stereo amplifier and streaming electronics, and the V-PS-2 provides the clean 24-volt DC power those components need. A single supply delivers up to 60 watts across two zone outputs and can run two keypads, which keeps the parts count low in a typical two-room installation. The enclosure can rest on a shelf or be screwed to a wall or panel using its...