• 100W/ch @ 4 ohms, 60W/ch @ 8 ohms; 200W bridged into 8 ohms
  • Built-in Bluetooth with external antenna, plus main and interrupting RCA inputs with automatic priority
  • A and B speaker outputs selected from the front panel; 5-way binding posts
  • Front volume and balance; rear bass and treble (+/-12dB)
  • Line out, 12V trigger in/out and always-on, signal-sense or trigger turn-on
  • 1U chassis with rack ears included; 115/230VAC selectable; under 0.5W standby
Price: $379.00
    Availability: In Stock
    Usually ships In 24 - 48 hours

    Item #: P100BT

    Overview

    The Russound P100BT is a 1U rack-mountable dual-source stereo power amplifier with built-in Bluetooth, designed to add a room, a patio or a larger space to any audio system. It is rated at 100 watts per channel into 4 ohms and 60 watts per channel into 8 ohms, and a rear switch bridges the channels for 200 watts into a single 8-ohm load. Its shallow 6.54-inch chassis suits tight racks and shelves. Two RCA line inputs manage source priority on their own: the main input carries the everyday source, such as a streamer, and the interrupting input takes over whenever its source, such as a TV or turntable, plays, returning to the main source a few seconds after it stops. Bluetooth streaming from a phone or tablet is built in, with an external antenna for range; pairing starts with a long press of the front power button. Separate A and B speaker outputs, switched from the front panel and sharing one volume control, let one amplifier cover an indoor pair and an outdoor pair. Volume and balance are on the front, with bass and treble adjustable by +/-12dB on the rear. A line output passes the playing audio, Bluetooth included, to another amplifier. The P100BT can stay on, wake on signal, or follow a 12V trigger, and it draws under half a watt in standby.

    Key Features

    • 100W x 2 @ 4 ohms, 200W bridged
    • Bluetooth with external antenna
    • Main and interrupting inputs with automatic priority
    • A/B speaker outputs selectable from the front panel
    • Volume, balance, bass and treble
    • Line out, 12V trigger in/out, three turn-on modes
    • 1U rack ears included

    In the Box

    • P100BT amplifier
    • Bluetooth antenna
    • 6-ft power cord
    • Rack-mount ears with mounting screws (rack screws not included)

    Installation Notes

    Leave one empty rack space above and below for ventilation. Stereo mode needs 4 ohms minimum per output; bridged mode needs 8 ohms and uses only Speaker A. The line out is unbuffered, so daisy-chain no more than three amplifiers.

    Ideal Applications

    Adding a room or patio to an existing system, TV or turntable priority over a streaming source, outdoor and large-room zones, and simple single-room systems that need Bluetooth from a phone or tablet.

    Compatibility

    Accepts line-level sources such as the Russound MBX-PRE streamer, TVs or any RCA line output, plus Bluetooth devices. Russound's application example pairs the P100BT with OutBack 5B65mk2 speakers and IC-620 in-ceiling speakers. Works with impedance-matching volume controls or speaker selectors (sold separately) for more speaker pairs.

    Specifications

    ModelP100BT
    Part Number2800-854354
    Channels2, bridgeable
    Output Power100W/ch @ 4 ohms; 60W/ch @ 8 ohms (1kHz, stereo driven); 200W bridged @ 8 ohms
    Minimum Impedance4 ohms stereo; 8 ohms bridged
    Input Sensitivity690mV for 100W @ 4 ohms; 750mV for 60W @ 8 ohms (1kHz)
    Input Impedance>22k ohms line input
    Signal-to-Noise>90dB (A-weighted)
    Line InputsMain and interrupting (priority) source, RCA
    Line OutputRCA loop out of the playing audio (unbuffered; up to 3 amps daisy-chained)
    BluetoothBuilt in, external antenna
    Speaker OutputsA and B, front-panel selectable; 5-way binding posts, up to 12 AWG
    Tone ControlsBass and treble +/-12dB (rear); volume and balance (front)
    Turn-On ModesAlways on, signal sensing (auto), 12V trigger
    Trigger12VDC input and output
    Power115/230VAC, 60/50Hz, voltage selector; IEC C8 inlet
    Fuse (North America)T5A, 250V
    Standby Power<0.5W
    Rack Height1U (ears included)
    Operating Temperature32-104F (0-40C)
    Product Dimensions17.13" W x 1.75" H x 6.54" D (43.5 x 4.4 x 16.6 cm)
    Product Weight5.51 lb (2.5 kg)
    Shipping Dimensions20.67" W x 5.83" H x 10.63" D (52.5 x 14.8 x 27 cm)
    Shipping Weight8.7 lb (3.95 kg)
    Warranty2 years (limited)

    Downloads

    Manufacturer documentation for this product. Files open in a new tab.