Audio & Video

The Russound ALT-70V-50 gives a room or zone its own volume adjustment on a commercial or residential 70-volt speaker system. It installs in a standard wall box and sits between the 70V amplifier line and the local speakers, letting occupants turn a space down without affecting the rest of the building.Eleven attenuation steps use make-before-break switching, so the signal is never momentarily interrupted as the knob turns. Wiring is handled by a removable four-pole screw-down connector that...

The Russound AVA2.1 is a slim 2.1-channel amplifier designed to give a television proper sound through in-ceiling, in-wall, bookshelf or passive soundbar speakers. Connect it to the TV's HDMI ARC port and CEC lets the existing TV or cable/satellite remote control volume and power, so the client keeps a single remote. Beyond TV duty it works as a small receiver with four selectable inputs: HDMI ARC, optical, RCA line-level and Bluetooth 5.0 for streaming from a phone. The Class D amplifier...

The Russound AVA3.1 is a small-footprint mini-AVR built to turn a TV into a proper three-channel sound system without the bulk of a full-size receiver. It drives left, center and right speakers from an efficient Class-D amplifier section rated at 50 watts per channel into 4 ohms, and adds an RCA output for a powered subwoofer. The TV connects over HDMI with Audio Return Channel, and CEC lets the television's own remote take care of everyday power and volume duties. An optical input, an RCA...

The Russound AW6-LS-BR is the largest satellite in Russound's landscape speaker family, built for big yards, pool decks and gardens where smaller landscape speakers run out of reach. A 6.5-inch polypropylene woofer with a rubber surround works with a 3/4-inch marine-grade PEI dome tweeter to cover 50 Hz to 20 kHz, and the speaker is rated at 90 dB (1 W/1 m).Because the housing is molded from UV-stable ASA material and sealed to IP65, the speaker can sit in mulch beds, along walkways or up in a...

The Russound AW70V6mk2 is a pair of compact two-way loudspeakers built for distributed audio, whether that means background music across a restaurant patio or a stereo pair under the eaves at home. Each ported cabinet uses a 6.5-inch injection-molded polypropylene woofer and a 1-inch titanium dome tweeter, rated at 55 Hz to 20 kHz (+/-3 dB) with 87 dB sensitivity.A weather-resistant tap switch on the rear panel sets the power draw on a 70V line (7.5, 15, 30 or 60 W) or 100V line (15, 30 or 60...

The Russound AW70V6mk2 is a pair of compact two-way loudspeakers built for distributed audio, whether that means background music across a restaurant patio or a stereo pair under the eaves at home. Each ported cabinet uses a 6.5-inch injection-molded polypropylene woofer and a 1-inch titanium dome tweeter, rated at 55 Hz to 20 kHz (+/-3 dB) with 87 dB sensitivity.A weather-resistant tap switch on the rear panel sets the power draw on a 70V line (7.5, 15, 30 or 60 W) or 100V line (15, 30 or 60...

The Russound BSK-2 Bluetooth Source Kit packages two parts. The BTC-2X remote transceiver receives Bluetooth 5.1 audio. The BTC-2 audio hub sits with the electronics and handles power and audio connections. A single CAT5/6 cable (not included) of up to 500 feet links the two, so the receiver can go in the room where people actually use their phones while the hub stays in the rack.The hub offers stereo RCA input and output plus an optical digital output, so the kit works with Russound...

The Russound BTC-2X is a compact Bluetooth 5.1 transceiver that lets guests and family stream from phones and tablets into a Russound multiroom system. It connects to the equipment over a single CAT5/6 run, so the receiver can go where Bluetooth reception is strongest, such as a living area or patio, rather than inside a metal rack.Connected to a compatible SMZ-Series or MCA-Series controller (or to the BTC-2 audio hub), the BTC-2X draws power over the CAT5/6 cable, which can be up to 500 feet...

The Russound Cinema Bar 3.0 is a passive left/center/right soundbar designed to hang below a wall-mounted television and give clearer dialogue and a wider front stage than built-in TV speakers. Each of its three channels gets its own 4-inch polypropylene woofer, a 1-inch soft-dome tweeter with a waveguide and phase plug, and a 4-inch passive radiator that extends low end without adding a subwoofer.The three channels sit in separate, isolated chambers inside a reinforced MDF cabinet, which...

The Russound D1290 is the twelve-channel member of Russound's D-Series Class D amplifiers, designed for whole-home and light-commercial racks that need a lot of clean power in little space. Its 12 channels are organised as 6 independent stereo zones rated at 90 watts per channel into 4 ohms (one zone driven) and 45 watts into 8 ohms, and any zone can be bridged for 180 watts into an 8-ohm load when a patio, gym or great room needs more headroom. Two shared bus inputs let one or two sources...

The Russound D1675 is the sixteen-channel member of Russound's D-Series Class D amplifiers, designed for whole-home and light-commercial racks that need a lot of clean power in little space. Its 16 channels are organised as 8 independent stereo zones rated at 75 watts per channel into 4 ohms (one zone driven) and 37 watts into 8 ohms, and any zone can be bridged for 150 watts into an 8-ohm load when a patio, gym or great room needs more headroom. Two shared bus inputs let one or two sources...

The Russound D250LS solves a common multiroom problem: a room that also has its own audio source. Wired between a whole-house system and a room's speakers, this two-channel digital amplifier plays the house feed until a local device such as a bedroom TV, desktop PC or game console starts sending audio, then automatically switches the room's speakers to that local source. When the local source goes quiet, it returns to the house feed after a delay you can set anywhere from five seconds to five...

The Russound D890 is the eight-channel member of Russound's D-Series Class D amplifiers, designed for whole-home and light-commercial racks that need a lot of clean power in little space. Its 8 channels are organised as 4 independent stereo zones rated at 90 watts per channel into 4 ohms (one zone driven) and 45 watts into 8 ohms, and any zone can be bridged for 180 watts into an 8-ohm load when a patio, gym or great room needs more headroom. Two shared bus inputs let one or two sources feed...

The Russound EZB-8 E-Z Connector is a speaker terminal block that brings order to multi-room volume-control wiring. When one amplifier feeds several rooms through impedance-matching volume controls, every home run has to land somewhere; the EZB-8 gives those runs a single, labeled termination point instead of a bundle of twisted splices behind the amplifier. It connects up to eight pairs of speakers, and its removable screw-down connectors accept wire up to 12 AWG, so each run can be...

The Russound HTP-7.2 is a double-gang, Decora-style wallplate that gathers every speaker connection for a home theater into one tidy point on the wall. It handles anything from a 5.1 layout up to a full 7.2 system, with binding posts for seven speakers and RCA jacks for two powered subwoofers, so the receiver or amplifier can connect to in-wall speaker runs without loose wire coming out of the drywall. The plate is built in two halves. One half carries four pairs of stereo binding posts; the...

The Russound IC-610 is a 6.5-inch, two-way in-ceiling loudspeaker designed as an all-purpose choice for multiroom music. A polypropylene cone woofer handles the low and midrange frequencies while a 0.75-inch silk dome tweeter, which pivots to direct high frequencies toward the listening area, keeps vocals and detail clear even when the speaker cannot be placed ideally.The woofer basket and baffle are formed as a single piece for added rigidity and more efficient bass output. Installation is...

The Russound IC-610T is a 6.5-inch single-point stereo in-ceiling speaker built for spaces where a separate left and right pair would be awkward or unnecessary. It accepts both stereo channels through independent left and right inputs and reproduces them from a single baffle, so listeners hear the full mix anywhere in a small room.A 6.5-inch injection-molded polypropylene woofer with a dual voice coil handles bass and midrange for both channels, while twin 0.5-inch PEI tweeters carry the left...

The Russound IC-620 steps up from the IC-610 with a larger 1-inch pivoting silk dome tweeter, slightly deeper bass extension and higher sensitivity, making it a fit for the main listening areas of a home. Its 6.5-inch injection-molded polypropylene woofer is mounted in a one-piece baffle and basket for added stiffness and more efficient low-frequency output.The pivoting tweeter lets the installer aim high frequencies toward seating areas when the ceiling location is off-center. Installation...

The Russound IC-620T is a 6.5-inch in-ceiling speaker that plays both stereo channels from a single fixture. It pairs a dual voice-coil injection-molded polypropylene woofer with two fixed 0.75-inch silk tweeters, so a room that only has space for one speaker still gets a full stereo signal rather than a summed mono feed.It is a smart answer for bathrooms, hallways, closets, laundry rooms and small bedrooms where placing a left/right pair is awkward or would leave listeners hearing only one...

The Russound IC-630 sits at the top of the 6.5-inch IC in-ceiling range, aimed at the rooms where people actually sit and listen: living rooms, dens, and theater spaces. Its injection-molded polypropylene woofer carries a vapor-deposited titanium layer for added stiffness, and it is paired with a 1-inch titanium tweeter that pivots so highs can be aimed at the seating area.Russound specifies a 45 Hz to 25 kHz response, 90 dB sensitivity and a recommended power range of 5 to 110 watts, giving...

The Russound IC-820 is an 8-inch, two-way in-ceiling speaker built for spaces that need more bass and output than a 6.5-inch model can deliver: great rooms, open kitchens, rooms with tall ceilings, and family rooms that double as TV areas. Each speaker uses an injection-molded polypropylene woofer driven by a 17 oz magnet, with a 1-inch silk tweeter that pivots so high frequencies can be steered toward seating.Russound rates the IC-820 at 42 Hz to 20 kHz with 92 dB sensitivity, so it plays...

The Russound IC-820T delivers full stereo from a single 8-inch in-ceiling speaker. A dual voice-coil injection-molded polypropylene woofer handles the low end for both channels, while two fixed 1-inch silk tweeters carry the left and right highs. The result is balanced stereo in a room where a separated pair would be hard to place or would leave part of the room hearing only one side.Compared with the 6.5-inch IC-620T, the larger woofer reaches lower, with Russound rating the IC-820T at 38 Hz...

The Russound IC-830 is the 8-inch member of Russound's Premium Performance (30 Series) in-ceiling line, built for large living areas, great rooms with tall ceilings, and dedicated media or home theater spaces. Its 8-inch injection-molded polypropylene woofer carries a vapor-deposited titanium coating for added stiffness, and a 1-inch titanium tweeter pivots so high frequencies can be aimed at the seating area.Russound rates the IC-830 at 38 Hz to 25 kHz with 93 dB sensitivity and a recommended...

The Russound ICG-6R is a 6.5-inch round NanoPerf grille for Russound IC-Series in-ceiling loudspeakers. It is the same round, bezel-less magnetic style that ships in the box with the IC-Series speakers, so it is the direct replacement when a grille is damaged, lost or covered in construction overspray. The grille sits close to the ceiling surface so the speaker reads as a subtle architectural detail.Magnets hold the grille to the speaker, so it can be pressed into place or pulled off for...