Audio & Video

The QSC WL218-sw is a dual 18-inch passive subwoofer designed as the low-frequency companion to the WideLine line-array system. It can be flown beneath WideLine arrays or ground-stacked, and uses two independent internal chambers, each with its own 18-inch driver, for high-output, extended bass in large touring and installed sound reinforcement rigs.Key FeaturesTwo 18-inch drivers (850 W, 8 ohm each) with 4-inch fiberglass voice coilsDual independent chambers with long-excursion double-spider,...

The QSC WL218-sw is a large-format flying subwoofer built to add deep, high-output low frequency to the WideLine line array system and to demanding touring or installed rigs. It loads two 18-inch long-excursion drivers with 4-inch voice coils into a braced, vented trapezoidal enclosure of Baltic birch plywood, delivering extended, articulate bass for concerts, houses of worship, and large venues.Key FeaturesDual 18-inch vented subwoofer for high-SPL low-frequency reinforcementBaltic birch...

The QSC WL3082 is the three-way line array element of the QSC WideLine-8 series, built for touring and permanent installations that demand wide, even coverage from a compact box. Each cabinet pairs dual 8-inch woofers with a midrange and a 3-inch compression driver to deliver 140-degree horizontal coverage and smooth full-range sound when arrayed. This is the black finish version.Key FeaturesThree-way design: dual 8-inch woofers, midrange, and 3-inch HF compression driverWide 140-degree...

The QSC YM-300 is a yoke mount bracket for QSC Cinema Surround (SR-series) loudspeakers. It is a professional installation accessory that lets an integrator hang or wall-mount compatible surround speakers and adjust their aiming angle for proper coverage in a cinema or large-venue surround system. Per the QSC yoke-mount documentation, the YM-300 is designed to fit the SR-18, SR-110B, SR-800, SR-1000, SR-8100, and SR-8101 loudspeakers.Key FeaturesYoke (U-bracket) mount for QSC Cinema Surround...

The QSC YM-400 is a yoke mount bracket for QSC Cinema Surround (SR-series) loudspeakers. It is an installation accessory that supports and aims compatible surround loudspeakers for cinema and large-venue applications, letting the installer set the correct vertical angle for even coverage. According to QSC's yoke-mount documentation, the YM-400 is designed to fit the SR-1020, SR-1030, and SR-1290 loudspeakers.Key FeaturesYoke (U-bracket) mount for QSC Cinema Surround SR-series...

The QSC YM-46 is a yoke mount bracket for QSC Cinema Surround (SR-series) loudspeakers. This installation accessory holds and aims compatible surround loudspeakers so an integrator can set the proper vertical angle for balanced coverage in cinema and large-venue surround systems. Per QSC's yoke-mount documentation, the YM-46 is designed to fit the SR-26, SR-46, and SR-8200 loudspeakers.Key FeaturesYoke (U-bracket) mount for QSC Cinema Surround SR-series loudspeakersCompatible with SR-26,...

The QSC YM-500 is a yoke mount bracket for QSC Cinema Surround (SR-series) loudspeakers. It is an installation accessory used to suspend or wall-mount a compatible surround loudspeaker and adjust its aiming angle for correct coverage in cinema and large-venue surround systems. According to QSC's yoke-mount documentation, the YM-500 is designed to fit the SR-1590 loudspeaker.Key FeaturesYoke (U-bracket) mount for QSC Cinema Surround SR-series loudspeakersCompatible with the SR-1590Adjustable...

The QSC RP1 kit is a set of rear blanking plates (a four-pack) for Q-SYS Core and I/O card frames. It is an accessory, not an active device: the plates cover the open rear slots above any unused I/O card positions so a partially populated chassis stays closed, tidy and properly ventilated.Key FeaturesRear plate covers for Q-SYS Core / I/O card frame slotsSupplied as a four-pack of blank platesCloses empty card openings on partially loaded chassisMaintains a clean rear appearance and correct...

The Russound 5B55mk2-B is a 5.25-inch, two-way OutBack mk2 speaker designed to handle patios, decks, pool areas and porches through every season, while also working indoors in garages, workshops or on a shelf. An injection-molded polypropylene (IMPP) woofer is joined by a 1-inch Teteron tweeter for clear, detailed highs, all behind an aluminum grille that resists the elements.Russound rates the 5B55mk2-B at 72 Hz - 20 kHz (+/-3 dB) with 90 dB SPL (2.83 V @ 1 m) sensitivity and a recommended...

The Russound 5B55mk2-W is a 5.25-inch, two-way OutBack mk2 speaker designed to handle patios, decks, pool areas and porches through every season, while also working indoors in garages, workshops or on a shelf. An injection-molded polypropylene (IMPP) woofer is joined by a 1-inch Teteron tweeter for clear, detailed highs, all behind an aluminum grille that resists the elements.Russound rates the 5B55mk2-W at 72 Hz - 20 kHz (+/-3 dB) with 90 dB SPL (2.83 V @ 1 m) sensitivity and a recommended...

The Russound 5B65mk2-B is a 6.5-inch, two-way OutBack mk2 speaker designed to handle patios, decks, pool areas and porches through every season, while also working indoors in garages, workshops or on a shelf. An injection-molded polypropylene (IMPP) woofer is joined by a 1-inch Teteron tweeter for clear, detailed highs, all behind an aluminum grille that resists the elements.Russound rates the 5B65mk2-B at 64 Hz - 20 kHz (+/-3 dB) with 91 dB SPL (2.83 V @ 1 m) sensitivity and a recommended...

The Russound 5B65mk2-W is a 6.5-inch, two-way OutBack mk2 speaker designed to handle patios, decks, pool areas and porches through every season, while also working indoors in garages, workshops or on a shelf. An injection-molded polypropylene (IMPP) woofer is joined by a 1-inch Teteron tweeter for clear, detailed highs, all behind an aluminum grille that resists the elements.Russound rates the 5B65mk2-W at 64 Hz - 20 kHz (+/-3 dB) with 91 dB SPL (2.83 V @ 1 m) sensitivity and a recommended...

The Russound 5R82mk2-G disguises a full-range two-way loudspeaker as a gray granite boulder, so patios, pool decks and garden beds get real music without visible hardware. Inside, an 8-inch polypropylene woofer and a 1.1-inch aluminum dome tweeter are joined by an asymmetrical crossover at 2.8 kHz, giving a rated response of 58 Hz to 20 kHz (+/-3 dB) and 90 dB sensitivity at 2.83 V / 1 m.This Mark 2 version of the OutBack rock speaker brings a larger tweeter, an improved crossover network and...

The Russound 5R82mk2-S disguises a full-range two-way loudspeaker as a sandstone boulder, so patios, pool decks and garden beds get real music without visible hardware. Inside, an 8-inch polypropylene woofer and a 1.1-inch aluminum dome tweeter are joined by an asymmetrical crossover at 2.8 kHz, giving a rated response of 58 Hz to 20 kHz (+/-3 dB) and 90 dB sensitivity at 2.83 V / 1 m.This Mark 2 version of the OutBack rock speaker brings a larger tweeter, an improved crossover network and an...

The Russound 5R82mk2-W disguises a full-range two-way loudspeaker as a weathered granite boulder, so patios, pool decks and garden beds get real music without visible hardware. Inside, an 8-inch polypropylene woofer and a 1.1-inch aluminum dome tweeter are joined by an asymmetrical crossover at 2.8 kHz, giving a rated response of 58 Hz to 20 kHz (+/-3 dB) and 90 dB sensitivity at 2.83 V / 1 m.This Mark 2 version of the OutBack rock speaker brings a larger tweeter, an improved crossover network...

The Russound A-H2 is a compact hub for the A-BUS distributed audio system, built to bring a single music source into two rooms. Connect a stereo receiver to its RCA line inputs and the receiver's own source selection becomes available in both zones, or wire a single source such as a computer or media player straight in. Each zone runs over one Cat-5 cable from the hub's RJ-45 outputs to an A-BUS amplified keypad, which handles local volume and drives the room's speakers. Four IR emitter jacks...

The Russound A-PS is the dedicated power supply for A-BUS, Russound's single-cable distributed audio platform. Rather than running power to each room, an A-BUS system sends audio, power and control down Cat-5 to amplified keypads, and the A-PS is the source of that power. It accepts any mains voltage from 100 to 240 volts AC and delivers a regulated 24 volts DC at up to 2.5 amps, enough to run as many as four A-BUS amplified keypads. The supply lives at the central equipment location next to...

The Russound A2100 is a compact Class D stereo power amplifier for adding clean, efficient power to a distributed or dedicated audio system. It occupies half of a 1U rack space, so two half-rack Russound components can share a single shelf, and the supplied ears allow it to be mounted on its own in a standard rack. Rated at 100 watts per channel into 8 ohms, 125 watts into 4 ohms, or about 225 watts bridged into a single 8-ohm load, it is well suited to large rooms, additional speaker pairs,...

The Russound AB-1.2 is an in-wall A/B switch for rooms where one set of speakers needs to be shared. It can route a single pair of speakers to either of two amplifiers, for example a local stereo receiver and a whole-house distributed audio amplifier, or it can send one amplifier to either of two speaker pairs.Switching is a single press of the front button, so family members or guests do not need to touch the equipment rack. Wiring terminates on detachable, colour-coded snap connectors that...

The Russound AB-2.2 is a compact tabletop A/B selector for shelves and equipment cabinets. It lets one pair of speakers be driven by either of two amplifiers, or lets a single amplifier be routed to one of two speaker pairs, all with one push of a button.A common use is a family room where a stereo receiver plays the TV or turntable through the same in-ceiling speakers that are also connected to the whole-house audio system. The AB-2.2 keeps those two amplifiers from ever being connected...

The Russound AB-3.2 removes the button from A/B switching. It connects one pair of speakers to two amplified sources and watches the alternate input: when program material appears there, it hands the speakers over automatically, and when that source falls silent for the set delay it switches back to the default amplifier.That makes it a simple way to let a TV or local receiver take over room speakers that normally play the whole-house system, or to have a paging amplifier interrupt background...

The Russound ADP-1.2 is a passive interface that turns a speaker-level signal into a line-level signal, letting you take the speaker output of an amplifier or receiver and feed it into the RCA inputs of a separate, more powerful amplifier. Russound designed it for the CAA66 and MCA-66 controller amplifiers, where some zones have no preamp outputs; the ADP-1.2 provides the line-level feed those zones are missing, so a zone can drive a high-power amp for larger rooms, more speakers or a...

The Russound Advanced Programming Cable links a computer to Russound devices that are configured or updated through a direct connection. Russound lists it for the KP6 and KPL system keypads used with CAA66 multiroom systems, for ComPoint intercom components, for the iBridge Dock and for the BTC-1X. The computer end is a female DB-9 serial connector and the device end is a flat pin connector that attaches to the device. It is a tool for the installer rather than an everyday user item: one cable...

The Russound ALT-126R is a stereo in-wall volume control for distributed audio systems where more speakers are connected to an amplifier than it could otherwise drive. Its autoformer steps up the impedance seen by the amplifier, so multiple rooms can be wired to one amplifier channel pair while each room keeps independent level control.The impedance setting is selected with a switch located behind the faceplate, which keeps adjustments quick during commissioning. Twelve steps (including off)...