Crestron

Crestron FT2A-CP-RJ45 FlipTop RJ45 Cable Pass-Through Module The FT2A-CP-RJ45 is a cable pass-through module fitted with an RJ45 jack, designed for Crestron FT2A series FlipTop tabletop interface boxes. It brings a wired Ethernet connection directly to the table, allowing a laptop or device to plug into the network from the FlipTop rather than reaching for a wall or floor port. The module presents a keystone-style RJ45 termination at the tabletop and passes the connection through to structured...

Crestron FT2A-PLT-BLANK-10 FlipTop Blank Filler Plate, 10-Pack The FT2A-PLT-BLANK-10 is a ten-pack of blank filler plates for Crestron FT2A series FlipTop tabletop interface boxes. The plates cover unused module positions within the assembly, giving the tabletop a finished, uniform appearance where no connectivity or power module is installed. Supplied in quantity, these fillers are convenient for outfitting multiple FlipTop boxes or maintaining a stock of spares across a facility. Each plate...

Crestron FT2A-PWR-US-3 FlipTop US Power Module, 3-Outlet The FT2A-PWR-US-3 is a US-style AC power module providing three outlets for Crestron FT2A series FlipTop tabletop interface boxes. It brings mains power directly to the conference or presentation table, giving participants a convenient place to power laptops, chargers, and other devices during a meeting. Integrated into the FlipTop assembly, the module keeps the outlets concealed within the tabletop and accessible when the lid is opened,...

Crestron GLPP-1DIMFLV2CN-PM GreenLight 1-Channel Low-Voltage Dimmer Module The GLPP-1DIMFLV2CN-PM is a single-channel forward-phase dimmer from the Crestron GreenLight Permanent Power family, designed to control low-voltage lighting loads. It uses forward-phase dimming suited to magnetic low-voltage fixtures and integrates over a two-wire Cresnet connection for network control within a Crestron lighting system. The panel-mount format allows installation inside an enclosure or lighting load...

Crestron GLPP-1DIMFLV3CN-PMLighting Dimmer ModuleThe GLPP-1DIMFLV3CN-PM is a single-channel forward-phase dimming module from the Crestron GreenLight Permanent Power family, engineered for smooth, flicker-free control of low-voltage lighting loads. It ships in a panel-mount form factor intended for installation inside a lighting cabinet or enclosure, where it joins a distributed control ecosystem and takes direction from Crestron processors and keypads.Wiring follows a 3-wire scheme, and the...

Crestron GLPP-DIMFLVCN-PMLighting Dimmer ModuleThe GLPP-DIMFLVCN-PM is a multi-channel forward-phase low-voltage dimming module within the Crestron GreenLight Permanent Power range. Built for in-cabinet mounting, it handles electronic and magnetic low-voltage (ELV/MLV) lighting loads and provides the smooth, quiet dimming performance expected of architectural installations across homes, conference rooms, and hospitality environments.The module ties into a Crestron system over Cresnet, which...

Crestron GLPPA-KP-W-SLighting KeypadThe GLPPA-KP-W-S is an architectural wall-mount keypad from the Crestron GreenLight Permanent Power lighting line, finished in smooth white to blend cleanly with modern interiors. Its buttons can be engraved with custom labels, giving occupants clear, intuitive access to lighting scenes, room presets, and other automation functions from a single wall location.The keypad connects over Cresnet, drawing power and exchanging control data with the system on one...

Crestron GLPPA-KP2-W-SLighting KeypadThe GLPPA-KP2-W-S is a two-button architectural keypad in the Crestron GreenLight Permanent Power family, presented in a smooth white finish suited to residential and commercial spaces alike. Its pair of engravable buttons offers a streamlined interface for users who need direct, uncluttered access to a small set of lighting scenes or automation commands.Wall-mounted and powered over Cresnet, the keypad communicates with Crestron processors on the same...

Crestron GLPPA-KP4-W-SLighting KeypadThe GLPPA-KP4-W-S is a four-button architectural keypad from the Crestron GreenLight Permanent Power lineup, finished in smooth white for a discreet appearance on any wall. The four engravable buttons give users a versatile control surface for selecting among multiple lighting scenes, room presets, and automation commands without navigating a screen.The keypad mounts to a standard wall location and operates over Cresnet, receiving power and exchanging data...

Crestron GLS-ODT-C-CNOccupancy SensorThe GLS-ODT-C-CN is a ceiling-mounted dual-technology occupancy sensor in the Crestron GreenLight family, combining passive infrared (PIR) and ultrasonic detection to reliably sense presence in a room. Using both technologies together improves accuracy by requiring corroborating signals to confirm occupancy, reducing false triggers and missed detections in spaces with partitions or limited motion.The sensor connects and draws power over Cresnet, reporting...

Crestron GLS-ODT-C-NSOccupancy SensorThe GLS-ODT-C-NS is a ceiling-mounted dual-technology occupancy sensor from the Crestron GreenLight line, pairing passive infrared and ultrasonic detection for dependable presence sensing. As a network stand-alone (NS) model, it operates independently with a local relay output, switching connected lighting directly without requiring a central control processor.This self-contained design makes it well suited to single rooms, closets, restrooms, and other...

Crestron GLS-OIR-C-CNOccupancy SensorThe GLS-OIR-C-CN is a ceiling-mounted passive infrared (PIR) occupancy sensor in the Crestron GreenLight family, detecting the heat signature of movement to determine whether a space is occupied. PIR sensing offers clean, well-defined coverage and is a proven approach for offices, corridors, and other rooms with clear lines of sight to occupants.The sensor operates over Cresnet, which supplies its low-voltage power and carries occupancy data back to a...

Crestron HD-DA2-4K-EHDMI Distribution AmplifierThe HD-DA2-4K-E is a compact 1x2 HDMI distribution amplifier that takes a single 4K UHD source and delivers identical signals to two displays simultaneously. It is designed for applications where one source, such as a media player, cable box, or computer, needs to feed a pair of screens, video walls, or a display plus a confidence monitor without signal degradation.The amplifier handles EDID management to negotiate compatible video and audio...

Crestron HD-EXT3-C-W SystemHDMI HDBaseT Extender KitThe HD-EXT3-C-W System is a complete 4K HDMI extension kit that pairs an HD-TX3-C transmitter with an HD-RX3-C receiver to send high-resolution video over a single category cable using HDBaseT technology. The transmitter accepts an HDMI input, also compatible with DVI and DisplayPort sources via adapters, and outputs to HDBaseT, while the receiver converts the link back to HDMI at the remote display.Beyond video, the kit carries bidirectional...

Crestron HD-MD4X1-4KZ-EHDMI SwitcherThe HD-MD4X1-4KZ-E is a four-input, one-output HDMI switcher built for uncompromised 4K60 4:4:4 video with full high dynamic range support, including HDR10, HDR10+, and Dolby Vision. It accepts four HDMI sources, also compatible with DVI and DisplayPort via adapters, and routes the selected input to a single display while preserving the finest color detail and HDCP 2.3 protected content.Automatic input switching selects an active source as soon as it is...

Crestron HD-MD8X2HDMI Matrix SwitcherThe HD-MD8X2 is an eight-input, two-output HDMI matrix switcher featuring Crestron QuickSwitch HD technology, which maintains HDCP authentication across connected devices to deliver fast, reliable transitions between sources. It accepts eight HDMI 1.3a inputs and independently routes any two to its outputs, making it well suited to multi-source environments that feed a pair of displays.Operators can select sources directly from the front panel, while...

Crestron HD-RX-101-C-1G-E-B-THDMI / DM Lite ExtenderThe HD-RX-101-C-1G-E-B-T is a one-gang wall-plate DM Lite receiver in a black textured finish, designed to recover HDMI video sent over standard category cabling and present it at a clean, decor-matched wall location. It accepts a DM Lite input over CATx and outputs HDMI to a nearby display, with an integrated Ethernet pass-through for network connectivity at the same point.Paired with a compatible HD-TX transmitter, the receiver supports...

Crestron HD-RX-101-C-EHDMI / DM Lite ExtenderThe HD-RX-101-C-E is a surface-mount DM Lite receiver that extends HDMI video over affordable category cabling, converting a DM Lite input on CATx back to an HDMI output for a local display or projector. The output is DVI-compatible, and the compact enclosure mounts discreetly near the endpoint device for a clean installation.When paired with a compatible transmitter, the receiver supports distances up to 230 ft for 1080p and 2K and up to 130 ft for...

Crestron HD-RX-201-C-EHDMI / DM Lite ExtenderThe HD-RX-201-C-E is a DM Lite receiver that extends HDMI video over category cabling and adds integrated control pass-through for far-end devices. It takes a DM Lite input on CATx and outputs HDMI to a display, while carrying RS-232 and IR signals across the same link so a projector or screen can be commanded from the source end without separate control wiring.Paired with a compatible transmitter, the receiver supports resolutions up to 4K UHD and...

Crestron HD-RX-USB-2000-CHDMI / DM Lite ExtenderThe HD-RX-USB-2000-C is a DM Lite receiver that extends both HDMI video and USB 2.0 over a single category cable, purpose-built for KVM-style applications. At the remote end it delivers an HDMI output to a display along with USB connectivity, enabling a keyboard, mouse, or peripheral to operate a distant computer as if directly attached.The receiver is designed to work with the HD-TX-USB-2000-C transmitter, together forming a complete link that...

Crestron HD-TX-101-C-1G-E-W-THDMI / DM Lite ExtenderThe HD-TX-101-C-1G-E-W-T is a one-gang wall-plate DM Lite transmitter in a white textured finish, designed to send HDMI video from a wall location over standard category cabling. It accepts an HDMI input, also compatible with DVI and DisplayPort sources via adapters, and converts it to a DM Lite output on CATx for a clean, decor-matched connection point.The transmitter supports resolutions up to 4K and handles HDCP 2.2 protected content,...

Crestron HD-TX-101-C-EHDMI / DM Lite ExtenderThe HD-TX-101-C-E is a surface-mount DM Lite transmitter that sends HDMI video over economical category cabling to a paired receiver. It accepts an HDMI input, also compatible with DVI and DisplayPort sources via adapters, and includes a USB-A power port that can supply a Crestron Multihead cable, then converts the signal to a DM Lite output on CATx.The transmitter supports up to 4K at distances of 130 ft and 1080p or 2K at up to 230 ft, handling...

Crestron HD-TX-301-C-EHDMI / DM Lite ExtenderThe HD-TX-301-C-E is a DM Lite transmitter with auto-switching, multi-format inputs, designed to consolidate several sources and send the active one over category cabling. It accepts two HDMI inputs, also compatible with DVI and DisplayPort via adapters, plus an analog audio input, and outputs a DM Lite signal on CATx to a paired receiver.Automatic switching selects a live source as it is connected, while the transmitter also carries RS-232, IR, and...

Crestron HD-TX-USB-2000-CHDMI / DM Lite ExtenderThe HD-TX-USB-2000-C is a DM Lite transmitter that carries both HDMI video and USB 2.0 over a single category cable, engineered for KVM-style extension. It accepts an HDMI input along with USB connectivity at the source end, then combines them onto a DM Lite output on CATx for a clean, single-cable run to the display location.Designed to pair with the HD-RX-USB-2000-C receiver, the transmitter forms a complete link for extending a computer's...