Mounts & Racks

The Chief VCT107B is an extra-large tool-free ceiling mount built for today's laser projectors in the 50-150 lb (22.7-68 kg) range. It includes the HC107B custom interface, designed for a specific projector model, and is about 30% slimmer and 25% lighter than the VCM mount it replaces. MicroZone tool-free knobs handle roll and yaw, while the fine pitch adjustment runs through a 100:1 gear for very precise alignment; it can be turned by hand or driven with a 1/2" (13 mm) socket. PrecisionSet...

The Chief VCTUB is the universal, black-finish version of the VCT extra-large tool-free projector mount. It is designed for laser projectors weighing between 50 and 150 lb (22.7-68 kg) and ships with the HCUB universal interface, so a wide range of large projectors can be hung without a model-specific bracket. Compared with the VCM mount it succeeds, the VCT is lighter and slimmer, giving a cleaner look overhead. Tool-free MicroZone adjustment makes registration quick and repeatable, with 5°...

The Chief VCTUW is the universal, white-finish version of the VCT extra-large tool-free projector mount. It is designed for laser projectors weighing between 50 and 150 lb (22.7-68 kg) and ships with the HCUW universal interface, so a wide range of large projectors can be hung without a model-specific bracket. Compared with the VCM mount it succeeds, the VCT is lighter and slimmer, giving a cleaner look overhead. Tool-free MicroZone adjustment makes registration quick and repeatable, with 5°...

The Chief VPAUB is a compact universal mount made for projection that does not point straight at a wall. Its adjustment range — a full 360° of pitch, 90° of roll and 360° of yaw — lets a projector aim straight down onto a floor or table, straight up at a ceiling, or rotate into portrait orientation for tall digital signage and art installations. Each axis adjusts independently, and the universal interface accepts a wide range of projectors up to 75 lb (34 kg). The body measures about 5.5"...

The Chief VPAUW is a compact universal mount made for projection that does not point straight at a wall. Its adjustment range — a full 360° of pitch, 90° of roll and 360° of yaw — lets a projector aim straight down onto a floor or table, straight up at a ceiling, or rotate into portrait orientation for tall digital signage and art installations. Each axis adjusts independently, and the universal interface accepts a wide range of projectors up to 75 lb (34 kg). The body measures about 5.5"...

The Chief WBAP is a projector platform accessory that works with WBM2 over-whiteboard mounts. When a SMART interactive board is hung over an existing dry-erase board, the projector arm would normally sit at a different depth than the board; the WBAP brings both onto a single mounting plane so a complete SMART all-in-one system can be installed cleanly. It accepts SMART short-throw projector wall arms and supports up to 25 lb (11.3 kg). Height adjustment, lateral shift and micro adjustment help...

The Chief WBAU universal adapter kit expands what a WBM2 whiteboard mount can carry. It attaches to the WBM2 uprights and clamps around the bezel of the interactive board, so boards without a dedicated SMART bracket can still be hung over an existing whiteboard or chalkboard. Use it for SMART 685 and 690 boards and for interactive boards from other manufacturers, including Promethean ActivBoard 100, 300 and 500 models and Polyvision Eno Classic and TS series boards. The kit handles boards from...

The Chief WBAUF1 is a retrofit adapter plate that keeps an existing SMART interactive installation in service. Many classrooms still have SMART i3 or i4 series wall arms in place after the original projector has failed or become outdated. Instead of replacing the whole arm, the WBAUF1 adapts that arm to accept a current short-throw projector from Epson, Hitachi or NEC, replacing SMART i2, i3, i4 or UF65W projectors. It is a cost-effective way to extend the life of an earlier interactive...

The Chief WBM3E lets schools add an interactive whiteboard without tearing out the boards already on the wall. It fastens directly to the wall over a pre-existing dry-erase board or chalkboard, leaving the old board undamaged behind the new one. Because no two classrooms are laid out quite the same, the WBM3E uses telescoping legs that can be anchored anywhere from 5 to 7 feet apart, with an extension range of 57.84" to 87.78". Height adjustment, lateral shift and micro adjustment let...

The Chief WM110AUS is a complete short-throw projector wall mount kit that combines the WM110S single stud extension arm with the RSMAUS Universal Mini RPA Elite projector mount. Buying them together means one part number and everything needed to hang a short-throw or ultra-short-throw projector above an interactive board or screen; the kit also suits wall-mounted long-throw projectors. The arm provides 11.3" - 18" of extension, with quick-connect installation and micro height and leveling...

The Chief WM110S is a single stud wall arm for positioning short-throw and ultra-short-throw projectors close to the screen, and it also handles wall-mounted long-throw projectors. It provides 11.3" - 18" of extension from the wall. A quick-connect system speeds installation, and micro height and leveling adjustment let the installer square the image without loosening the arm. When paired with an RPA Elite mount, micro roll, pitch and yaw adjustment give fine image alignment. Cables run inside...

The Chief WM120AUS is a complete short-throw projector wall mount kit that combines the WM120S single stud extension arm with the RSMAUS Universal Mini RPA Elite projector mount. Buying them together means one part number and everything needed to hang a short-throw or ultra-short-throw projector above an interactive board or screen; the kit also suits wall-mounted long-throw projectors. The arm provides 16" - 29" of extension, with quick-connect installation and micro height and leveling...

The Chief WM120S is a single stud wall arm for positioning short-throw and ultra-short-throw projectors close to the screen, and it also handles wall-mounted long-throw projectors. It provides 16" - 29" of extension from the wall. A quick-connect system speeds installation, and micro height and leveling adjustment let the installer square the image without loosening the arm. When paired with an RPA Elite mount, micro roll, pitch and yaw adjustment give fine image alignment. Cables run inside...

The Chief WM130AUS is a complete short-throw projector wall mount kit that combines the WM130S single stud extension arm with the RSMAUS Universal Mini RPA Elite projector mount. Buying them together means one part number and everything needed to hang a short-throw or ultra-short-throw projector above an interactive board or screen; the kit also suits wall-mounted long-throw projectors. The arm provides 28" - 53" of extension, with quick-connect installation and micro height and leveling...

The Chief WM130S is a single stud wall arm for positioning short-throw and ultra-short-throw projectors close to the screen, and it also handles wall-mounted long-throw projectors. It provides 28" - 53" of extension from the wall. A quick-connect system speeds installation, and micro height and leveling adjustment let the installer square the image without loosening the arm. When paired with an RPA Elite mount, micro roll, pitch and yaw adjustment give fine image alignment. Cables run inside...

The Chief WM210AUS is a complete short-throw projector wall mount kit that combines the WM210S dual stud extension arm with the RSMAUS Universal Mini RPA Elite projector mount. Buying them together means one part number and everything needed to hang a short-throw or ultra-short-throw projector above an interactive board or screen; the kit also suits wall-mounted long-throw projectors. The arm provides 12.8" - 20" of extension and 10 in of lateral shift for aligning between studs, with...

The Chief WM210MAUS is a complete short-throw projector wall mount kit that combines the WM210S dual stud extension arm with the RPMAUS Universal RPA Elite projector mount. Buying them together means one part number and everything needed to hang a short-throw or ultra-short-throw projector above an interactive board or screen; the kit also suits wall-mounted long-throw projectors. The arm provides 12.8" - 20" of extension and 10 in of lateral shift for aligning between studs, with...

The Chief WM210S is a dual stud wall arm for positioning short-throw and ultra-short-throw projectors close to the screen, and it also handles wall-mounted long-throw projectors. It provides 12.8" - 20" of extension from the wall plus 10 in of integrated lateral shift to center the image between studs. A quick-connect system speeds installation, and micro height and leveling adjustment let the installer square the image without loosening the arm. When paired with an RPA Elite mount, micro...

The Chief WM220AUS is a complete short-throw projector wall mount kit that combines the WM220S dual stud extension arm with the RSMAUS Universal Mini RPA Elite projector mount. Buying them together means one part number and everything needed to hang a short-throw or ultra-short-throw projector above an interactive board or screen; the kit also suits wall-mounted long-throw projectors. The arm provides 17.5" - 30" of extension and 10 in of lateral shift for aligning between studs, with...

The Chief WM220MAUS is a ready-to-install short throw projector wall kit that combines two Chief components in one order: the WM220S medium short throw extension arm and the RPMAUS Universal RPA Elite projector mount. The arm anchors across two studs and telescopes from 17.5 in to 30 in, putting a short throw projector at the right distance from the screen or interactive board. Ten inches of lateral shift lets you center the projector even when stud locations do not cooperate, and built-in...

The Chief WM220S is a medium-length short throw projector arm that mounts to two wall studs and extends from 17.5 in to 30 in. It gives integrators a stable, adjustable platform for positioning a short throw projector above a screen or interactive board, and it also handles wall-mounted long-throw projectors. A quick-connect system shortens install time, while integrated micro height and leveling adjustment and 10 in of lateral shift make it easy to center the projector between studs. Cabling...

The Chief WM230AUS packages a large short throw wall arm and a universal projector mount in a single kit. It combines the WM230S dual-stud extension arm with the RSMAUS Universal Mini RPA Elite projector mount, which includes a universal interface to cut down on setup time. The arm telescopes to reach projectors that need extra distance from the wall, and 10 in of lateral shift lets you center the image even when studs are off-center. Quick-connect hardware and built-in micro height and...

The Chief WM230S is the large size in Chief's dual-stud short throw arm family, built for installations where the projector needs to sit farther from the wall. The telescoping arm mounts across two studs and includes 10 in of lateral shift, so you can center the projector on the screen without relocating framing. Quick-connect hardware and integrated micro height and leveling adjustment simplify setup, and an internal cable channel keeps power and signal wiring out of sight. Security comes...

The Chief WM240AUS is the longest-reach kit in Chief's dual-stud short throw wall mount family. It bundles the extra-large WM240S telescoping arm with the RSMAUS Universal Mini RPA Elite projector mount, giving you everything needed to hang a projector well out from the wall in one order. The arm extends up to 66 in, and 10 in of lateral shift helps center the projector when studs are not where you need them. Quick-connect hardware and built-in micro height and leveling adjustment shorten...