Mounts & Racks

The Chief PACVISO1 is designed to stop a wall-mounted display from turning the wall into a speaker for the room next door. Placed between the wall and the RMF3 Medium Fit Fixed mount, its high-performance proprietary elastomeric materials decouple the display from the structure, reducing perceived structure-borne sound by up to 80-87%, or up to 25-30 dB of insertion loss on average according to Chief. It supports up to 125 lb (56.7 kg) on wood or steel studs (25 ga minimum, 16 in on center)...

The Chief PCM2000B is a ceiling mount for large flat panels that hangs the display from an angled column, a configuration well suited to angling a screen down toward viewers in high-ceiling spaces. It supports up to 200 lb (90.7 kg) and offers a tilt range of +5 to -25 degrees, so the image can be aimed at the audience below. Post-installation leveling roll lets you square the display after it is hung, and the mount accepts landscape or portrait orientation. This model ships without an...

The Chief PDR2000B is a heavy-duty dual swing arm wall mount for large flat panels, built for installations where the screen must pull away from the wall and swivel toward viewers in different parts of the room. It supports up to 200 lb (90.7 kg) across typical 42 to 86 in displays and provides 37 in of extension, swivel, lateral shift, height adjustment and +5 / -16 degrees of tilt, with micro-adjustment and post-installation leveling roll for precise final positioning. The wall plate mounts...

The Chief PDRUB is a heavy-duty dual swing arm wall mount for large flat panels, built for installations where the screen must pull away from the wall and swivel toward viewers in different parts of the room. It supports up to 200 lb (90.7 kg) across typical 42 to 71 in displays and provides 37 in of extension, swivel, lateral shift, height adjustment and +5 / -16 degrees of tilt, with micro-adjustment and post-installation leveling roll for precise final positioning. The wall plate mounts to...

The Chief PF1UB is a solid, low-profile floor stand for mounting a large flat panel where wall mounting is not an option or not desired. It handles typical 42 to 86 in displays weighing up to 200 lb (90.7 kg) and provides 34 in (86.4 cm) of manual height adjustment, so the screen can be set for seated meetings, standing presentations or signage viewing. Tilt and post-installation leveling roll help aim and square the image, and the display can be installed in landscape or portrait orientation....

The Chief PF2UB floor stand puts two large flat panels back-to-back on a single base, making it a strong choice for two-sided digital signage and presentation spaces where audiences approach from both directions. It supports typical 42 to 86 in displays and is rated for 200 lb (90.7 kg). Telescoping height adjustment provides 34 in of range without tools, while Centris technology delivers easy fingertip tilt that stays where you set it. ClickConnect gives an audible click to confirm each...

The Chief PFB1UB anchors a single flat panel to the floor for installations where a mobile cart or freestanding base would be too easy to move or tip. Bolting the stand down makes it a secure choice for public areas such as retail floors, transit stations, museums and lobbies. It supports displays up to 150 lb (68 kg) with VESA patterns from 200 x 200 mm to 860 x 515 mm, and offers +15 / -15 degrees of tilt to angle the image toward viewers. Post-installation leveling roll squares the display...

The Chief PFB2UB is a bolt-down floor stand that carries two flat panels back-to-back, giving two-sided signage a permanent, secure footing in open spaces. Because it anchors to the floor, it resists tampering and accidental bumps in busy public areas such as malls, airports, stadium concourses and hospital corridors. The stand is rated for 125 lb (56.7 kg) and accepts VESA patterns from 200 x 200 mm to 860 x 515 mm. Each display can be tilted +15 / -15 degrees to suit sightlines,...

The Chief PFCUB is a lightweight, collapsible mobile cart that moves a large flat panel wherever it is needed. It supports typical 42 to 86 in displays up to 200 lb (90.7 kg) with VESA patterns from 200 x 200 mm to 862 x 517 mm, and ships with a universal interface bracket. Telescoping height adjustment provides 24 in (609.6 mm) of travel, tilt lets you angle the screen toward the audience, and post-installation leveling roll squares the image. Integrated cable management keeps wiring tidy as...

The Chief PFCUB-G is a lightweight, collapsible mobile cart that moves a large flat panel wherever it is needed. It supports typical 42 to 86 in displays up to 200 lb (90.7 kg) with VESA patterns from 200 x 200 mm to 862 x 517 mm, and ships with a universal interface bracket. Telescoping height adjustment provides 24 in (609.6 mm) of travel, tilt lets you angle the screen toward the audience, and post-installation leveling roll squares the image. Integrated cable management keeps wiring tidy...

The Chief PFCUS is a lightweight, collapsible mobile cart that moves a large flat panel wherever it is needed. It supports typical 42 to 86 in displays up to 200 lb (90.7 kg) with VESA patterns from 200 x 200 mm to 862 x 517 mm, and ships with a universal interface bracket. Telescoping height adjustment provides 24 in (609.6 mm) of travel, tilt lets you angle the screen toward the audience, and post-installation leveling roll squares the image. Integrated cable management keeps wiring tidy as...

The Chief PFMUB is a mobile confidence monitor cart from Chief's PFC family of large flat panel carts and stands. It carries one display in the typical 42" to 86" size range, up to 200 lbs (90.7 kg), across VESA patterns from 200 x 200 mm to 862 x 517 mm, and the interface bracket is included. Telescoping height adjustment spans 3' to 4' (91-122 cm), a 12 in (30.5 cm) range, with no tools required. Centris fingertip tilt holds the screen angle until you change it, and ClickConnect gives an...

The Chief PFQUB is a mobile confidence monitor cart from Chief's PFC family of large flat panel carts and stands. It carries one display in the typical 42" to 86" size range, up to 200 lbs (90.7 kg), across VESA patterns from 200 x 200 mm to 862 x 517 mm, and the interface bracket is included. This lower 2' version provides 12 in (30.5 cm) of tool-free telescoping height adjustment. Centris fingertip tilt holds the screen angle until you change it, and ClickConnect gives an audible click when...

The Chief PG1A is a locking steel security cage that fully encloses a ceiling-mounted projector and its mount, protecting it from theft and from tampering or recreational damage. This medium model accepts equipment up to 7.5" x 20.0" x 20.4" (H x W x D) and measures 10.2" x 20.5" x 20.4" overall. It fits Chief RPA and RPM series projector mounts directly and also attaches to 1" and 1.5" NPT poles for use with RSM and RSA mounts. The guard can be added to an existing installation without...

The Chief PG1AW is a locking steel security cage that fully encloses a ceiling-mounted projector and its mount, protecting it from theft and from tampering or recreational damage. This medium model accepts equipment up to 7.5" x 20.0" x 20.4" (H x W x D) and measures 10.2" x 20.5" x 20.4" overall. It fits Chief RPA and RPM series projector mounts directly and also attaches to 1" and 1.5" NPT poles for use with RSM and RSA mounts. The guard can be added to an existing installation without...

The Chief PG2A is a locking steel security cage that fully encloses a ceiling-mounted projector and its mount, protecting it from theft and from tampering or recreational damage. This small model accepts equipment up to 7.5" x 16.0" x 16.0" (H x W x D) and measures 10.2" x 16.1" x 16.4" overall. It fits Chief RPA and RPM series projector mounts directly and also attaches to 1" and 1.5" NPT poles for use with RSM and RSA mounts. The guard can be added to an existing installation without...

The Chief PG2AW is a locking steel security cage that fully encloses a ceiling-mounted projector and its mount, protecting it from theft and from tampering or recreational damage. This small model accepts equipment up to 7.5" x 16.0" x 16.0" (H x W x D) and measures 10.2" x 16.1" x 16.4" overall. It fits Chief RPA and RPM series projector mounts directly and also attaches to 1" and 1.5" NPT poles for use with RSM and RSA mounts. The guard can be added to an existing installation without...

The Chief PG3A is a locking steel security cage that fully encloses a projector and its ceiling mount to deter theft and recreational damage. As the large model in Chief's PG projector guard range, it accepts equipment up to 11.36" x 25" x 24.9" (H x W x D) and measures 14.3" x 25.2" x 25.4" overall, giving room for bigger installation-class projectors than the PG1 and PG2. Chief specifies the PG1 through PG3 guards for use with its RPA and RPM series projector mounts only, so confirm your...

The Chief PG3AW is a locking steel security cage that fully encloses a projector and its ceiling mount to deter theft and recreational damage. As the large model in Chief's PG projector guard range, it accepts equipment up to 11.36" x 25" x 24.9" (H x W x D) and measures 14.3" x 25.2" x 25.4" overall, giving room for bigger installation-class projectors than the PG1 and PG2. Chief specifies the PG1 through PG3 guards for use with its RPA and RPM series projector mounts only, so confirm your...

The Chief PG4A is an extra-large projector guard for large venue installations, enclosing big projectors in a locked steel cage to prevent theft and recreational damage. Telescoping front and back panels adjust for depths from 22" to 27" (559-685 mm), and the adjustable front opening handles different lens positions. Removable doors give full access for service, and the guard can be retrofit to an existing installation without disturbing projector alignment. Maximum equipment size depends on...

The Chief PG4AW is an extra-large projector guard for large venue installations, enclosing big projectors in a locked steel cage to prevent theft and recreational damage. Telescoping front and back panels adjust for depths from 22" to 27" (559-685 mm), and the adjustable front opening handles different lens positions. Removable doors give full access for service, and the guard can be retrofit to an existing installation without disturbing projector alignment. Maximum equipment size depends on...

The Chief PIWRF2000B is a low-profile in-wall swing arm mount for large flat panels. The arm recesses into the wall so the display sits as close as 1.7 in (4.3 cm) when retracted, then pulls out on its 15" arm when you need to angle the screen toward a seating area. It supports displays up to 200 lbs (90.7 kg) on VESA patterns from 200 x 200 mm to 862 x 517 mm, in landscape or portrait. Adjustment covers extension, swivel, height and tilt (+2° / -15°), with 5 in (127 mm) of lateral shift for...

The Chief PIWRFUB is a low-profile in-wall swing arm mount for large flat panels. The arm recesses into the wall so the display sits as close as 1.7 in (4.3 cm) when retracted, then pulls out on its 15" arm when you need to angle the screen toward a seating area. It supports displays up to 200 lbs (90.7 kg) on VESA patterns from 200 x 200 mm to 862 x 517 mm, in landscape or portrait. Adjustment covers extension, swivel, height and tilt (+2° / -15°), with 5 in (127 mm) of lateral shift for...

The Chief PL1A is a keyed lock accessory that adds theft protection to a Chief RPA series projector mount, going beyond the standard All-Points Security hardware without enclosing the whole projector in a cage. This version is sized for large projector models and is supplied with key option "A"; key options A, B and C are available so keys can be matched or kept separate across a building or campus. Sliding access doors keep lamp and filter maintenance quick, and a slotted design maintains...